[Sat May 19 16:58:50 2012] Detection parameters:
  Position = (212.5, 231.4) = 3 18 24.10 -44 18 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.0 +/- 18.1
  Background counts = 75.6
  Rate = 0.002 +/- 0.0003

[Sat May 19 16:58:51 2012] Off-axis axis estimate = 7.91'
[Sun May 20 02:53:18 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Sun May 20 02:53:18 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Sun May 20 02:53:18 2012] source mask rpix=2.4, npix_max = 33, mask sum = 23, frac = 0.690
[Sun May 20 02:53:18 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.38"
[Sun May 20 06:37:06 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src31.ximg exists
[Sun May 20 06:37:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src31.csv
[Sun May 20 06:37:06 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun May 20 06:37:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src31.csv
[Sun May 20 06:37:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:07 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun May 20 06:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun May 20 06:37:07 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun May 20 06:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun May 20 06:37:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:48 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 11.577569 pixels away
[Sun May 20 06:37:49 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:49 2012] Assessing source extent using major
[Sun May 20 06:37:49 2012] Source does appear to be extended
[Sun May 20 06:37:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:37:49 2012] Deleting source due to low Poisson probability 0.9