[Sat May 19 16:58:50 2012] Detection parameters:
  Position = (239.4, 302.8) = 3 18 13.13 -44 13 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.2 +/- 25.5
  Background counts = 261.1
  Rate = 0.003 +/- 0.0003

[Sat May 19 16:58:51 2012] Off-axis axis estimate = 4.29'
[Sun May 20 02:53:18 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Sun May 20 02:53:18 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Sun May 20 02:53:18 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.819
[Sun May 20 02:53:18 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.57"
[Sun May 20 06:37:06 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src25.ximg exists
[Sun May 20 06:37:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src25.csv
[Sun May 20 06:37:06 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun May 20 06:37:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src25.csv
[Sun May 20 06:37:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:07 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun May 20 06:37:07 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun May 20 06:37:07 2012] Fit fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun May 20 06:37:48 2012] Source 40 is offset by 7.811070 and -4.875995 pixels which is larger than
2 X fitted extent = 5.334207 x 5.334207, not incorporating fit results
[Sun May 20 06:37:49 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:49 2012] Assessing source extent using major
[Sun May 20 06:37:49 2012] Source does appear to be extended
[Sun May 20 06:37:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 13:42:39 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Sun May 20 13:42:39 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Sun May 20 13:42:39 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.819
[Sun May 20 13:42:39 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 8.57"
[Sun May 20 14:56:28 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_src20.ximg exists
[Sun May 20 14:56:28 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun May 20 14:56:28 2012] Fit fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_src20 appears to have run properly
[Sun May 20 14:56:29 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun May 20 14:56:29 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun May 20 14:56:29 2012] Fit fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun May 20 14:57:18 2012] Source 40 is offset by 7.811070 and -4.875995 pixels which is larger than
2 X fitted extent = 5.334161 x 5.334161, not incorporating fit results
[Sun May 20 14:57:18 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:57:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:57:18 2012] Assessing source extent using major
[Sun May 20 14:57:18 2012] Source does appear to be extended
[Sun May 20 14:57:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 18:54:42 2012] XMMSAS src. selection expression = ellipse(20781.669083, 26291.562439, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 18:54:42 2012] Writing source region out to fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src40_src.reg
[Mon May 21 18:54:42 2012] Extracting stamp from image fullrun_mos2_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (202, 265) - (277, 340)
[Mon May 21 18:54:42 2012] XMMSAS bgd. selection expression = annulus(20781.669083, 26291.562439, 1087.500000, 2175.000000, X, Y) && !ellipse(24124.897000, 25078.504400, 4958.400143, 4958.400143, 0.000000, X, Y) && !ellipse(23142.232000, 26182.578000, 3579.264103, 3579.264103, 0.000000, X, Y) && !ellipse(22703.778600, 25664.963800, 288.324808, 288.324808, 0.000000, X, Y) && !ellipse(21537.331573, 24581.386383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22999.551788, 28738.896759, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 21 18:54:42 2012] Writing fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src40.gif
[Mon May 21 19:22:41 2012] Mean detx,y = (-3481.18, 384.11) 
[Mon May 21 19:22:44 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 19:22:58 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 19:22:58 2012] Setting source spectrum file to fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon May 21 19:22:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon May 21 21:18:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 21:18:46 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:17 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:17 2012] Error reading totcts from fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon May 21 21:31:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:18 2012] Using photon index=1.80, rate=0.00252, arf fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src40.arf
[Mon May 21 21:31:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:18 2012] Updating source flux to 3.1e-14
[Mon May 21 21:33:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting