[Sat May 19 16:58:49 2012] Detection parameters:
  Position = (267.7, 398.1) = 3 18 1.66 -44 6 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 264.2 +/- 22.9
  Background counts = 71.7
  Rate = 0.004 +/- 0.0003

[Sat May 19 16:58:51 2012] Off-axis axis estimate = 7.56'
[Sun May 20 02:53:18 2012] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Sun May 20 02:53:18 2012] Initial guess for spatial extent in simple fitting = 10.21"
[Sun May 20 02:53:18 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.111
[Sun May 20 02:53:18 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.21"
[Sun May 20 06:37:05 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src17.ximg exists
[Sun May 20 06:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src17.csv
[Sun May 20 06:37:05 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun May 20 06:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src17.csv
[Sun May 20 06:37:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:06 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun May 20 06:37:06 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun May 20 06:37:06 2012] Fit fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun May 20 06:37:48 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 12.107632 pixels away
[Sun May 20 06:37:48 2012] Spatial fit model total counts = 951.523000, observed total counts = 938.000000
[Sun May 20 06:37:48 2012] Offset between fit and detection position for source 19 = 0.420855 pixels
[Sun May 20 06:37:48 2012] Warning, changing simple spatial fit ID from 17 to 50
[Sun May 20 06:37:48 2012] 965.114000 total counts/ 864.203000 bgd. counts: snr = 3.432659
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.420855 pixels
  Position = (267.3, 398.1) = 3 18 1.83 -44 6 23.1
  Extent = 3.1 (2.7-3.9)", rotation angle = 0
  Source counts = 100.9 +/- 31.1
  Background counts = 864.2
  Rate = 0.001 +/- 0.0003
[Sun May 20 06:37:49 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:49 2012] Assessing source extent using major axis lower bound
[Sun May 20 06:37:49 2012] Source does appear to be extended
[Sun May 20 06:37:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:37:49 2012] Deleting source due to low Poisson probability 0.9