[Sat May 19 16:58:48 2012] Detection parameters:
  Position = (278.0, 288.9) = 3 17 57.53 -44 14 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55092.2 +/- 282.6
  Background counts = 423.3
  Rate = 0.6 +/- 0.003

[Sat May 19 16:58:51 2012] Off-axis axis estimate = 1.64'
[Sun May 20 02:53:18 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun May 20 02:53:18 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun May 20 02:53:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Sun May 20 02:53:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sun May 20 06:37:05 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 20 06:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src1.csv
[Sun May 20 06:37:05 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 20 06:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src1.csv
[Sun May 20 06:37:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:06 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 20 06:37:06 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 20 06:37:06 2012] Fit fullrun_mos2_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 20 06:37:48 2012] Spatial fit model total counts = 116921.000000, observed total counts = 115922.000000
[Sun May 20 06:37:48 2012] Offset between fit and detection position for source 1 = 0.654128 pixels
[Sun May 20 06:37:48 2012] 115357.500000 total counts/ 25600.000000 bgd. counts: snr = 560.984375
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.654128 pixels
  Position = (277.4, 289.1) = 3 17 57.78 -44 14 16.9
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 89757.5 +/- 339.6
  Background counts = 25600.0
  Rate = 0.9 +/- 0.003
[Sun May 20 06:37:49 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:49 2012] Assessing source extent using major axis lower bound
[Sun May 20 06:37:49 2012] Source does appear to be extended
[Sun May 20 06:37:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 13:42:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 13:42:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 20 13:42:39 2012] Initial guess for spatial extent in simple fitting = 14.49"
[Sun May 20 13:42:39 2012] source mask rpix=3.3, npix_max = 58, mask sum = 55, frac = 0.937
[Sun May 20 13:42:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.49"
[Sun May 20 14:56:28 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 20 14:56:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_src1.csv
[Sun May 20 14:56:28 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 20 14:56:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_src1.csv
[Sun May 20 14:56:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 14:56:29 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 20 14:56:29 2012] fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 20 14:56:29 2012] Fit fullrun_mos2_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 20 14:57:18 2012] Spatial fit model total counts = 197417.000000, observed total counts = 187022.000000
[Sun May 20 14:57:18 2012] Offset between fit and detection position for source 1 = 0.584885 pixels
[Sun May 20 14:57:18 2012] 196959.000000 total counts/ 72900.000000 bgd. counts: snr = 459.477778
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.584885 pixels
  Position = (277.9, 288.8) = 3 17 57.58 -44 14 18.3
  Extent = 20.7 (20.5-20.8)", rotation angle = 0
  Source counts = 124059.0 +/- 443.8
  Background counts = 72900.0
  Rate = 1 +/- 0.004
[Sun May 20 14:57:18 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:57:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:57:18 2012] Assessing source extent using major axis lower bound
[Sun May 20 14:57:18 2012] Source does appear to be extended
[Sun May 20 14:57:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 18:54:42 2012] Counts = 124059.000000, rescaling region sizes by 3.000000
[Mon May 21 18:54:42 2012] XMMSAS src. selection expression = ellipse(24124.897000, 25078.504400, 3718.800107, 3718.800107, 0.000000, X, Y)
[Mon May 21 18:54:42 2012] Writing source region out to fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 21 18:54:42 2012] Extracting stamp from image fullrun_mos2_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (64, 75) - (492, 503)
[Mon May 21 18:54:42 2012] XMMSAS bgd. selection expression = annulus(24124.897000, 25078.504400, 18594.000535, 37188.001070, X, Y) && !ellipse(23142.232000, 26182.578000, 3579.264103, 3579.264103, 0.000000, X, Y) && !ellipse(22703.778600, 25664.963800, 288.324808, 288.324808, 0.000000, X, Y) && !ellipse(31694.662400, 29791.507800, 463.568813, 463.568813, 0.000000, X, Y) && !ellipse(26033.534000, 23045.480000, 1262.504036, 1262.504036, 0.000000, X, Y) && !ellipse(25346.135712, 23077.256531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25148.556396, 22560.587830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17213.381393, 28248.767731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17913.770800, 18235.491800, 642.795218, 354.855210, 35.652813, X, Y) && !ellipse(31465.038361, 24092.122894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12447.785620, 20325.813340, 728.312915, 316.106138, 69.605194, X, Y) && !ellipse(25337.692719, 20122.797012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21537.331573, 24581.386383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38509.996643, 30406.048065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22999.551788, 28738.896759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26661.883270, 14095.616333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20781.669083, 26291.562439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26902.410339, 23541.422028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24458.798800, 29749.180000, 1270.896037, 1270.896037, 0.000000, X, Y) && !ellipse(31559.225525, 37023.751068, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 21 18:54:42 2012] Writing fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src1.gif
[Mon May 21 18:55:22 2012] Mean detx,y = (-94.87, -169.79) 
[Mon May 21 18:55:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 19:00:25 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 19:00:26 2012] Setting source spectrum file to fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 19:00:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 21 21:31:17 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:17 2012] Error reading totcts from fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 21:31:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:18 2012] Using photon index=1.80, rate=1.24, arf fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src1.arf
[Mon May 21 21:31:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:18 2012] Updating source flux to 1.1e-11
[Mon May 21 21:35:48 2012] Reading fit data from xmm0603050101/analysis//spectral/fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 21 21:35:48 2012] Spectral fit parameter nH value = 7.06282e+20
[Mon May 21 21:35:48 2012] Spectral fit parameter PhoIndex value = 1.91866
[Mon May 21 21:35:48 2012] Failed to get F(0.3-8.0) from xmm0603050101/analysis//spectral/fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 21 21:35:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:35:48 2012] Using Nh = 7.1e+20, photon index=1.92, rate=1.24, arf fullrun_mos2_xmm0603050101_pi300-10000_pass1_cl_src1.arf
[Mon May 21 21:35:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:35:48 2012] Updating source flux to 1.1e-11