[Sat May 19 16:58:09 2012] Detection parameters:
  Position = (205.9, 210.7) = 3 18 26.77 -44 19 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 441.3 +/- 28.3
  Background counts = 68.2
  Rate = 0.007 +/- 0.0004

[Sat May 19 16:58:10 2012] Off-axis axis estimate = 9.25'
[Sun May 20 00:02:29 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:02:29 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Sun May 20 00:02:29 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Sun May 20 00:02:29 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.05"
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src10.ximg exists
[Sun May 20 02:53:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src10.csv
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun May 20 02:53:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src10.csv
[Sun May 20 02:53:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun May 20 02:53:17 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun May 20 06:37:40 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 13.561787 pixels away
[Sun May 20 06:37:40 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:40 2012] Assessing source extent using major
[Sun May 20 06:37:40 2012] Source does appear to be extended
[Sun May 20 06:37:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 11:36:38 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Sun May 20 11:36:38 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Sun May 20 11:36:38 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Sun May 20 11:36:38 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.05"
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src9.ximg exists
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun May 20 13:42:38 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src9 appears to have run properly
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun May 20 13:42:38 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun May 20 14:57:08 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 13.561787 pixels away
[Sun May 20 14:57:08 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:57:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:57:08 2012] Assessing source extent using major
[Sun May 20 14:57:08 2012] Source does appear to be extended
[Sun May 20 14:57:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 14:16:27 2012] XMMSAS src. selection expression = ellipse(17864.373337, 18282.277603, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 14:16:27 2012] Writing source region out to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src39_src.reg
[Mon May 21 14:16:27 2012] Extracting stamp from image fullrun_mos1_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (168, 173) - (243, 248)
[Mon May 21 14:16:27 2012] XMMSAS bgd. selection expression = annulus(17864.373337, 18282.277603, 1087.500000, 2175.000000, X, Y) && !ellipse(24144.262400, 25071.658200, 4965.504143, 4965.504143, 0.000000, X, Y)
[Mon May 21 14:16:27 2012] Writing fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src39.gif
[Mon May 21 14:41:49 2012] Mean detx,y = (9051.69, 2375.92) 
[Mon May 21 14:41:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 14:42:23 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 14:42:24 2012] Setting source spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon May 21 14:42:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Mon May 21 18:25:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 18:25:53 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:15 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:15 2012] Error reading totcts from fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon May 21 21:31:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:16 2012] Using photon index=1.80, rate=0.00698, arf fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src39.arf
[Mon May 21 21:31:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:16 2012] Updating source flux to 1.1e-13
[Mon May 21 21:31:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting