[Sat May 19 16:58:09 2012] Detection parameters:
  Position = (266.5, 255.3) = 3 18 2.19 -44 16 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 671.1 +/- 41.0
  Background counts = 301.9
  Rate = 0.007 +/- 0.0004

[Sat May 19 16:58:10 2012] Off-axis axis estimate = 3.89'
[Sun May 20 00:02:29 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:02:29 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Sun May 20 00:02:29 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.062
[Sun May 20 00:02:29 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.38"
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src8.ximg exists
[Sun May 20 02:53:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src8.csv
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun May 20 02:53:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src8.csv
[Sun May 20 02:53:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun May 20 02:53:17 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun May 20 06:37:40 2012] Spatial fit model total counts = 5246.550000, observed total counts = 5132.000000
[Sun May 20 06:37:40 2012] Offset between fit and detection position for source 31 = 9.434127 pixels
[Sun May 20 06:37:40 2012] 5605.675000 total counts/ 5173.330000 bgd. counts: snr = 6.010981
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 9.434127 pixels
  Position = (259.7, 248.7) = 3 18 4.96 -44 17 12.6
  Extent = 16.8 (16.7-33.5)", rotation angle = 0
  Source counts = 432.3 +/- 74.9
  Background counts = 5173.3
  Rate = 0.004 +/- 0.0007
[Sun May 20 06:37:40 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:40 2012] Assessing source extent using major axis lower bound
[Sun May 20 06:37:40 2012] Source does appear to be extended
[Sun May 20 06:37:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 11:36:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 11:36:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 20 11:36:38 2012] Initial guess for spatial extent in simple fitting = 16.75"
[Sun May 20 11:36:38 2012] source mask rpix=3.9, npix_max = 75, mask sum = 28, frac = 0.370
[Sun May 20 11:36:38 2012] Skipping simple spatial due to low active detector fraction
[Sun May 20 14:57:08 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:57:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:57:08 2012] Assessing source extent using major axis lower bound
[Sun May 20 14:57:08 2012] Source does appear to be extended
[Sun May 20 14:57:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 14:16:27 2012] XMMSAS src. selection expression = ellipse(22542.262000, 21591.920000, 1005.084029, 1005.084029, 0.000000, X, Y)
[Mon May 21 14:16:27 2012] Writing source region out to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src31_src.reg
[Mon May 21 14:16:27 2012] Extracting stamp from image fullrun_mos1_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (202, 191) - (317, 307)
[Mon May 21 14:16:27 2012] XMMSAS bgd. selection expression = annulus(22542.262000, 21591.920000, 1675.140048, 3350.280096, X, Y) && !ellipse(24144.262400, 25071.658200, 4965.504143, 4965.504143, 0.000000, X, Y) && !ellipse(22764.961365, 25626.052795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23550.300446, 23144.763306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25131.916000, 22527.968000, 2607.968075, 2607.968075, 0.000000, X, Y) && !ellipse(22616.165558, 23648.496704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25340.341320, 20140.939200, 284.834408, 284.834408, 0.000000, X, Y) && !ellipse(21321.802933, 24363.012878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25946.300000, 21223.676000, 1303.984038, 1303.984038, 0.000000, X, Y)
[Mon May 21 14:16:27 2012] Writing fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src31.gif
[Mon May 21 14:38:32 2012] Mean detx,y = (3780.75, -358.81) 
[Mon May 21 14:38:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 14:39:50 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 14:39:50 2012] Setting source spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon May 21 14:39:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Mon May 21 21:31:15 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:15 2012] Error reading totcts from fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon May 21 21:31:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:16 2012] Using photon index=1.80, rate=0.00431, arf fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src31.arf
[Mon May 21 21:31:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:16 2012] Updating source flux to 5e-14