[Sat May 19 16:58:09 2012] Detection parameters:
  Position = (421.5, 263.0) = 3 16 59.42 -44 16 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.4 +/- 19.4
  Background counts = 51.4
  Rate = 0.002 +/- 0.0002

[Sat May 19 16:58:10 2012] Off-axis axis estimate = 9.28'
[Sun May 20 00:02:29 2012] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:02:29 2012] Initial guess for spatial extent in simple fitting = 11.07"
[Sun May 20 00:02:29 2012] source mask rpix=2.5, npix_max = 37, mask sum = 40, frac = 1.079
[Sun May 20 00:02:29 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 11.07"
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src26.ximg exists
[Sun May 20 02:53:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src26.csv
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun May 20 02:53:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src26.csv
[Sun May 20 02:53:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun May 20 02:53:18 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun May 20 02:53:18 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sun May 20 06:37:40 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 13.171411 pixels away
[Sun May 20 06:37:40 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:40 2012] Assessing source extent using major
[Sun May 20 06:37:40 2012] Source does appear to be extended
[Sun May 20 06:37:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 11:36:38 2012] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Sun May 20 11:36:38 2012] Initial guess for spatial extent in simple fitting = 11.07"
[Sun May 20 11:36:38 2012] source mask rpix=2.5, npix_max = 37, mask sum = 40, frac = 1.079
[Sun May 20 11:36:38 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 11.07"
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src23.ximg exists
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun May 20 13:42:38 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src23 appears to have run properly
[Sun May 20 13:42:39 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun May 20 13:42:39 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun May 20 13:42:39 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun May 20 14:57:08 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 12.784953 pixels away
[Sun May 20 14:57:08 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:57:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:57:08 2012] Assessing source extent using major
[Sun May 20 14:57:08 2012] Source does appear to be extended
[Sun May 20 14:57:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 14:16:27 2012] XMMSAS src. selection expression = ellipse(36620.353882, 22834.334625, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 14:16:27 2012] Writing source region out to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src28_src.reg
[Mon May 21 14:16:27 2012] Extracting stamp from image fullrun_mos1_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (384, 226) - (459, 301)
[Mon May 21 14:16:27 2012] XMMSAS bgd. selection expression = annulus(36620.353882, 22834.334625, 1087.500000, 2175.000000, X, Y)
[Mon May 21 14:16:27 2012] Writing fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src28.gif
[Mon May 21 14:51:48 2012] Mean detx,y = (-3506.57, -12290.24) 
[Mon May 21 14:51:50 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 14:52:09 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 14:52:09 2012] Setting source spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon May 21 14:52:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Mon May 21 18:41:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 18:41:59 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:16 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:16 2012] Error reading totcts from fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon May 21 21:31:17 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:17 2012] Using photon index=1.80, rate=0.00184, arf fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src28.arf
[Mon May 21 21:31:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:17 2012] Updating source flux to 4.5e-14
[Mon May 21 21:31:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting