[Sat May 19 16:58:09 2012] Detection parameters:
  Position = (471.5, 271.8) = 3 16 39.18 -44 15 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.5 +/- 14.4
  Background counts = 40.4
  Rate = 0.0009 +/- 0.0001

[Sat May 19 16:58:10 2012] Off-axis axis estimate = 12.69'
[Sun May 20 00:02:29 2012] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:02:29 2012] Initial guess for spatial extent in simple fitting = 12.78"
[Sun May 20 00:02:29 2012] source mask rpix=2.9, npix_max = 47, mask sum = 45, frac = 0.952
[Sun May 20 00:02:29 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 12.78"
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src48.ximg exists
[Sun May 20 02:53:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src48.csv
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src48_1.ximg exists
[Sun May 20 02:53:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src48.csv
[Sun May 20 02:53:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 02:53:18 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sun May 20 02:53:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun May 20 02:53:18 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sun May 20 02:53:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun May 20 02:53:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:37:40 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 16.104888 pixels away
[Sun May 20 06:37:40 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:40 2012] Assessing source extent using major
[Sun May 20 06:37:40 2012] Source does appear to be extended
[Sun May 20 06:37:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:37:40 2012] Deleting source due to low Poisson probability 0.9