[Sat May 19 16:58:08 2012] Detection parameters:
  Position = (271.3, 266.6) = 3 18 0.26 -44 15 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1589.4 +/- 57.2
  Background counts = 387.3
  Rate = 0.02 +/- 0.0006

[Sat May 19 16:58:10 2012] Off-axis axis estimate = 3.04'
[Sun May 20 00:02:29 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:02:29 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Sun May 20 00:02:29 2012] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.108
[Sun May 20 00:02:29 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.95"
[Sun May 20 02:53:16 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 20 02:53:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src3.csv
[Sun May 20 02:53:16 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 20 02:53:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src3.csv
[Sun May 20 02:53:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 20 02:53:17 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun May 20 06:37:40 2012] Source 2 is offset by -4.096317 and -8.717870 pixels which is larger than
2 X fitted extent = 7.046483 x 7.046483, not incorporating fit results
[Sun May 20 06:37:40 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:40 2012] Assessing source extent using major
[Sun May 20 06:37:40 2012] Source does appear to be extended
[Sun May 20 06:37:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 11:36:38 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Sun May 20 11:36:38 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Sun May 20 11:36:38 2012] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.108
[Sun May 20 11:36:38 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.95"
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 20 13:42:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src3.csv
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 20 13:42:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src3.csv
[Sun May 20 13:42:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 20 13:42:38 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May 20 14:57:08 2012] Source 2 is offset by -3.972960 and -8.717870 pixels which is larger than
2 X fitted extent = 7.307081 x 7.307081, not incorporating fit results
[Sun May 20 14:57:08 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:57:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:57:08 2012] Assessing source extent using major
[Sun May 20 14:57:08 2012] Source does appear to be extended
[Sun May 20 14:57:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:57:08 2012] Source is confused with source 29
[Mon May 21 14:16:27 2012] Counts = 1589.374634, rescaling region sizes by 2.000000
[Mon May 21 14:16:27 2012] XMMSAS src. selection expression = ellipse(23550.300446, 23144.763306, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 21 14:16:27 2012] Writing source region out to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src2_src.reg
[Mon May 21 14:16:27 2012] Extracting stamp from image fullrun_mos1_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (196, 192) - (346, 342)
[Mon May 21 14:16:27 2012] XMMSAS bgd. selection expression = annulus(23550.300446, 23144.763306, 4350.000000, 8700.000000, X, Y) && !ellipse(24144.262400, 25071.658200, 4965.504143, 4965.504143, 0.000000, X, Y) && !ellipse(22764.961365, 25626.052795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25131.916000, 22527.968000, 2607.968075, 2607.968075, 0.000000, X, Y) && !ellipse(22616.165558, 23648.496704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23632.549020, 28300.916200, 321.185609, 321.185609, 0.000000, X, Y) && !ellipse(22542.262000, 21591.920000, 1340.112039, 1340.112039, 0.000000, X, Y) && !ellipse(17213.073410, 28157.378967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17864.373337, 18282.277603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22526.813202, 27887.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25340.341320, 20140.939200, 284.834408, 284.834408, 0.000000, X, Y) && !ellipse(31484.616547, 24073.779297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21321.802933, 24363.012878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22367.068054, 16431.208435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14342.956207, 28772.857239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26689.516815, 14111.454910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24422.872000, 28218.658000, 1235.048036, 1235.048036, 0.000000, X, Y) && !ellipse(27048.500671, 25861.707886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24399.506256, 14129.619293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25946.300000, 21223.676000, 1303.984038, 1303.984038, 0.000000, X, Y) && !ellipse(26220.696000, 29051.712000, 1209.024035, 1209.024035, 0.000000, X, Y) && !ellipse(32613.010000, 15122.404800, 1827.736053, 804.824023, 313.736267, X, Y)
[Mon May 21 14:16:27 2012] Writing fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src2.gif
[Mon May 21 14:27:16 2012] Mean detx,y = (1707.73, -491.32) 
[Mon May 21 14:27:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 14:32:39 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 14:32:39 2012] Setting source spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 21 14:32:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 21 17:36:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 17:36:58 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:15 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:15 2012] Error reading totcts from fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 21 21:31:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:16 2012] Using photon index=1.80, rate=0.0177, arf fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src2.arf
[Mon May 21 21:31:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:16 2012] Updating source flux to 1.7e-13
[Mon May 21 21:31:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting