[Sat May 19 16:58:09 2012] Detection parameters:
  Position = (311.5, 297.8) = 3 17 43.98 -44 13 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.9 +/- 28.9
  Background counts = 299.0
  Rate = 0.002 +/- 0.0003

[Sat May 19 16:58:10 2012] Off-axis axis estimate = 0.95'
[Sun May 20 00:02:29 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:02:29 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Sun May 20 00:02:29 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.149
[Sun May 20 00:02:29 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 6.90"
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src23.ximg exists
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun May 20 02:53:17 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src23 appears to have run properly
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun May 20 02:53:17 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun May 20 06:37:40 2012] Source 19 is offset by 6.805686 and 5.164389 pixels which is larger than
2 X fitted extent = 2.855802 x 2.855802, not incorporating fit results
[Sun May 20 06:37:40 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:40 2012] Assessing source extent using major
[Sun May 20 06:37:40 2012] Source does appear to be extended
[Sun May 20 06:37:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:37:40 2012] Source is confused with source 20
[Sun May 20 11:36:38 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Sun May 20 11:36:38 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Sun May 20 11:36:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.149
[Sun May 20 11:36:38 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 6.90"
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src21.ximg exists
[Sun May 20 13:42:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src21.csv
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun May 20 13:42:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src21.csv
[Sun May 20 13:42:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 13:42:39 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun May 20 13:42:39 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun May 20 13:42:39 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun May 20 14:57:08 2012] Source 19 is offset by 6.805686 and 5.164389 pixels which is larger than
2 X fitted extent = 2.852892 x 2.852892, not incorporating fit results
[Sun May 20 14:57:08 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:57:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:57:08 2012] Assessing source extent using major
[Sun May 20 14:57:08 2012] Source does appear to be extended
[Sun May 20 14:57:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 14:16:27 2012] XMMSAS src. selection expression = ellipse(27048.500671, 25861.707886, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 14:16:27 2012] Writing source region out to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src19_src.reg
[Mon May 21 14:16:27 2012] Extracting stamp from image fullrun_mos1_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (274, 260) - (349, 335)
[Mon May 21 14:16:27 2012] XMMSAS bgd. selection expression = annulus(27048.500671, 25861.707886, 1087.500000, 2175.000000, X, Y) && !ellipse(24144.262400, 25071.658200, 4965.504143, 4965.504143, 0.000000, X, Y) && !ellipse(25131.916000, 22527.968000, 2607.968075, 2607.968075, 0.000000, X, Y) && !ellipse(24422.872000, 28218.658000, 1235.048036, 1235.048036, 0.000000, X, Y) && !ellipse(26220.696000, 29051.712000, 1209.024035, 1209.024035, 0.000000, X, Y)
[Mon May 21 14:16:27 2012] Writing fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src19.gif
[Mon May 21 14:50:25 2012] Mean detx,y = (-1808.18, -2336.65) 
[Mon May 21 14:50:28 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 14:50:46 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 14:50:46 2012] Setting source spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon May 21 14:50:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon May 21 18:41:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 18:41:39 2012] rmf not generated due to insufficient counts
[Mon May 21 21:31:16 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:16 2012] Error reading totcts from fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon May 21 21:31:17 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:17 2012] Using photon index=1.80, rate=0.00199, arf fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src19.arf
[Mon May 21 21:31:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:17 2012] Updating source flux to 2.2e-14
[Mon May 21 21:31:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting