[Sat May 19 16:58:09 2012] Detection parameters:
  Position = (272.3, 325.8) = 3 17 59.80 -44 11 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 835.1 +/- 47.9
  Background counts = 439.2
  Rate = 0.009 +/- 0.0005

[Sat May 19 16:58:10 2012] Off-axis axis estimate = 2.74'
[Sun May 20 00:02:29 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:02:29 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Sun May 20 00:02:29 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.189
[Sun May 20 00:02:29 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.80"
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src7.ximg exists
[Sun May 20 02:53:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src7.csv
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun May 20 02:53:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src7.csv
[Sun May 20 02:53:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May 20 02:53:17 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun May 20 06:37:40 2012] Spatial fit model total counts = 8161.050000, observed total counts = 8158.000000
[Sun May 20 06:37:40 2012] Offset between fit and detection position for source 14 = 0.158587 pixels
[Sun May 20 06:37:40 2012] 7929.439000 total counts/ 7757.130000 bgd. counts: snr = 1.956399
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.158587 pixels
  Position = (272.2, 325.9) = 3 17 59.86 -44 11 37.2
  Extent = 4.0 (2.7-6.1)", rotation angle = 0
  Source counts = 172.3 +/- 89.0
  Background counts = 7757.1
  Rate = 0.002 +/- 0.0009
[Sun May 20 06:37:40 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:40 2012] Assessing source extent using major axis lower bound
[Sun May 20 06:37:40 2012] Source does appear to be extended
[Sun May 20 06:37:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:37:40 2012] Source is confused with source 9
[Sun May 20 11:36:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 11:36:38 2012] Initial guess for spatial extent in simple fitting = 4.01"
[Sun May 20 11:36:38 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.114
[Sun May 20 11:36:38 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.01"
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src7.ximg exists
[Sun May 20 13:42:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src7.csv
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun May 20 13:42:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src7.csv
[Sun May 20 13:42:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun May 20 13:42:38 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun May 20 14:57:08 2012] Spatial fit model total counts = 8156.660000, observed total counts = 8158.000000
[Sun May 20 14:57:08 2012] Offset between fit and detection position for source 14 = 0.004788 pixels
[Sun May 20 14:57:08 2012] 7924.652000 total counts/ 7749.510000 bgd. counts: snr = 1.989542
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.004788 pixels
  Position = (272.2, 325.9) = 3 17 59.86 -44 11 37.2
  Extent = 4.0 (2.6-5.8)", rotation angle = 0
  Source counts = 175.1 +/- 89.0
  Background counts = 7749.5
  Rate = 0.002 +/- 0.0009
[Sun May 20 14:57:08 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:57:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:57:08 2012] Assessing source extent using major axis lower bound
[Sun May 20 14:57:08 2012] Source does appear to be extended
[Sun May 20 14:57:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 14:16:27 2012] XMMSAS src. selection expression = ellipse(23632.549020, 28300.916200, 240.889207, 240.889207, 0.000000, X, Y)
[Mon May 21 14:16:27 2012] Writing source region out to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src14_src.reg
[Mon May 21 14:16:27 2012] Extracting stamp from image fullrun_mos1_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (258, 312) - (286, 340)
[Mon May 21 14:16:27 2012] XMMSAS bgd. selection expression = annulus(23632.549020, 28300.916200, 401.482012, 802.964023, X, Y) && !ellipse(24144.262400, 25071.658200, 4965.504143, 4965.504143, 0.000000, X, Y) && !ellipse(22526.813202, 27887.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24422.872000, 28218.658000, 1235.048036, 1235.048036, 0.000000, X, Y)
[Mon May 21 14:16:27 2012] Writing fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src14.gif
[Mon May 21 14:37:56 2012] Mean detx,y = (-2483.65, 1749.97) 
[Mon May 21 14:37:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 14:38:22 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 14:38:22 2012] Setting source spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 21 14:38:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon May 21 21:31:15 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:15 2012] Error reading totcts from fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 21 21:31:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:16 2012] Using photon index=1.80, rate=0.00175, arf fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src14.arf
[Mon May 21 21:31:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:16 2012] Updating source flux to 2.5e-14
[Mon May 21 21:31:20 2012] Flag c found in src. 14 procflags, skipping spectral fitting