[Sat May 19 16:58:08 2012] Detection parameters:
  Position = (278.1, 288.9) = 3 17 57.50 -44 14 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56438.7 +/- 289.5
  Background counts = 511.3
  Rate = 0.6 +/- 0.003

[Sat May 19 16:58:10 2012] Off-axis axis estimate = 1.63'
[Sun May 20 00:02:29 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:02:29 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun May 20 00:02:29 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Sun May 20 00:02:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sun May 20 02:53:16 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 20 02:53:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src1.csv
[Sun May 20 02:53:16 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 20 02:53:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src1.csv
[Sun May 20 02:53:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 20 02:53:17 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 20 02:53:17 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 20 06:37:40 2012] Spatial fit model total counts = 123543.000000, observed total counts = 122952.000000
[Sun May 20 06:37:40 2012] Offset between fit and detection position for source 1 = 1.233851 pixels
[Sun May 20 06:37:40 2012] 113556.800000 total counts/ 21924.000000 bgd. counts: snr = 618.858073
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.233851 pixels
  Position = (279.2, 289.3) = 3 17 57.03 -44 14 16.2
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 91632.8 +/- 337.0
  Background counts = 21924.0
  Rate = 0.9 +/- 0.003
[Sun May 20 06:37:40 2012] Vigneting correction estimate = 1.000000
[Sun May 20 06:37:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 06:37:40 2012] Assessing source extent using major axis lower bound
[Sun May 20 06:37:40 2012] Source does appear to be extended
[Sun May 20 06:37:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 11:36:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 11:36:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 20 11:36:38 2012] Initial guess for spatial extent in simple fitting = 14.49"
[Sun May 20 11:36:38 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.090
[Sun May 20 11:36:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.49"
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 20 13:42:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src1.csv
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 20 13:42:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src1.csv
[Sun May 20 13:42:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 20 13:42:38 2012] fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 20 13:42:38 2012] Fit fullrun_mos1_xmm0603050101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 20 14:57:08 2012] Spatial fit model total counts = 194132.000000, observed total counts = 198812.000000
[Sun May 20 14:57:08 2012] Offset between fit and detection position for source 1 = 1.285196 pixels
[Sun May 20 14:57:08 2012] 193972.000000 total counts/ 72900.000000 bgd. counts: snr = 448.414815
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.285196 pixels
  Position = (278.1, 288.7) = 3 17 57.49 -44 14 18.7
  Extent = 20.7 (20.6-20.8)", rotation angle = 0
  Source counts = 121072.0 +/- 440.4
  Background counts = 72900.0
  Rate = 1 +/- 0.004
[Sun May 20 14:57:08 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:57:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:57:08 2012] Assessing source extent using major axis lower bound
[Sun May 20 14:57:08 2012] Source does appear to be extended
[Sun May 20 14:57:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 14:16:26 2012] Counts = 121072.000000, rescaling region sizes by 3.000000
[Mon May 21 14:16:26 2012] XMMSAS src. selection expression = ellipse(24144.262400, 25071.658200, 3724.128107, 3724.128107, 0.000000, X, Y)
[Mon May 21 14:16:26 2012] Writing source region out to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 21 14:16:26 2012] Extracting stamp from image fullrun_mos1_xmm0603050101_pi300-10000_cl_sm2.00.img.gz, (64, 75) - (492, 503)
[Mon May 21 14:16:26 2012] XMMSAS bgd. selection expression = annulus(24144.262400, 25071.658200, 18620.640536, 37241.281072, X, Y) && !ellipse(22764.961365, 25626.052795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23550.300446, 23144.763306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12441.359177, 20301.313217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25131.916000, 22527.968000, 2607.968075, 2607.968075, 0.000000, X, Y) && !ellipse(22616.165558, 23648.496704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23632.549020, 28300.916200, 321.185609, 321.185609, 0.000000, X, Y) && !ellipse(22542.262000, 21591.920000, 1340.112039, 1340.112039, 0.000000, X, Y) && !ellipse(17213.073410, 28157.378967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17864.373337, 18282.277603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22526.813202, 27887.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25340.341320, 20140.939200, 284.834408, 284.834408, 0.000000, X, Y) && !ellipse(31484.616547, 24073.779297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21321.802933, 24363.012878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38559.324432, 30468.789062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22367.068054, 16431.208435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14342.956207, 28772.857239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26689.516815, 14111.454910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24422.872000, 28218.658000, 1235.048036, 1235.048036, 0.000000, X, Y) && !ellipse(27048.500671, 25861.707886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24399.506256, 14129.619293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36620.353882, 22834.334625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25946.300000, 21223.676000, 1303.984038, 1303.984038, 0.000000, X, Y) && !ellipse(26220.696000, 29051.712000, 1209.024035, 1209.024035, 0.000000, X, Y) && !ellipse(32613.010000, 15122.404800, 1827.736053, 804.824023, 313.736267, X, Y)
[Mon May 21 14:16:26 2012] Writing fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src1.gif
[Mon May 21 14:17:03 2012] Mean detx,y = (63.81, -49.17) 
[Mon May 21 14:17:09 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 14:22:31 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 14:22:31 2012] Setting source spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 14:22:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 21 21:31:15 2012] Updating aperture counts using extracted products
[Mon May 21 21:31:15 2012] Error reading totcts from fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 21:31:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:31:16 2012] Using photon index=1.80, rate=1.21, arf fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src1.arf
[Mon May 21 21:31:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:31:16 2012] Updating source flux to 1e-11
[Mon May 21 21:33:30 2012] Reading fit data from xmm0603050101/analysis//spectral/fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 21 21:33:30 2012] Spectral fit parameter nH value = 5.67625e+20
[Mon May 21 21:33:30 2012] Spectral fit parameter PhoIndex value = 1.89675
[Mon May 21 21:33:30 2012] Failed to get F(0.3-8.0) from xmm0603050101/analysis//spectral/fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 21 21:33:30 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 21:33:30 2012] Using Nh = 5.7e+20, photon index=1.90, rate=1.21, arf fullrun_mos1_xmm0603050101_pi300-10000_pass1_cl_src1.arf
[Mon May 21 21:33:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 21:33:30 2012] Updating source flux to 1e-11