[Tue Aug 21 11:22:04 2012] Detection parameters:
  Position = (224.1, 442.8) = 12 36 32.80 19 28 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 267.4 +/- 23.3
  Background counts = 118.3
  Rate = 0.005 +/- 0.0004

[Tue Aug 21 11:22:07 2012] Off-axis axis estimate = 11.77'
[Tue Aug 21 11:29:31 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 11:29:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 11:29:31 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Tue Aug 21 11:29:31 2012] source mask rpix=2.8, npix_max = 44, mask sum = 37, frac = 0.834
[Tue Aug 21 11:29:31 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.31"
[Tue Aug 21 12:56:25 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Aug 21 12:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_src3.csv
[Tue Aug 21 12:56:25 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Aug 21 12:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_src3.csv
[Tue Aug 21 12:56:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 12:56:25 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Aug 21 12:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Aug 21 12:56:25 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Aug 21 12:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Aug 21 12:56:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 15:10:55 2012] Spatial fit model total counts = 561.751000, observed total counts = 507.000000
[Tue Aug 21 15:10:55 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 21 15:10:55 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 15:10:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 15:10:55 2012] Assessing source extent using major
[Tue Aug 21 15:10:55 2012] Source does appear to be extended
[Tue Aug 21 15:10:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 15:11:23 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 15:11:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 15:11:23 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Tue Aug 21 15:11:23 2012] source mask rpix=2.8, npix_max = 44, mask sum = 37, frac = 0.834
[Tue Aug 21 15:11:23 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.31"
[Tue Aug 21 16:19:42 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Aug 21 16:19:42 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_src3.csv
[Tue Aug 21 16:19:42 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Aug 21 16:19:42 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_src3.csv
[Tue Aug 21 16:19:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 16:19:43 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Aug 21 16:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Aug 21 16:19:43 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Aug 21 16:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Aug 21 16:19:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 18:26:17 2012] Source 3 is offset by 5.552318 and -5.671500 pixels which is larger than
2 X fitted extent = 0.619844 x 0.619844, not incorporating fit results
[Tue Aug 21 18:26:17 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 18:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 18:26:17 2012] Assessing source extent using major
[Tue Aug 21 18:26:17 2012] Source does appear to be extended
[Tue Aug 21 18:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 18:26:35 2012] XMMSAS src. selection expression = ellipse(19447.641647, 38473.901520, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 18:26:35 2012] Writing source region out to fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src3_src.reg
[Tue Aug 21 18:26:35 2012] Extracting stamp from image fullrun_pn_xmm0602920101_pi300-10000_cl_sm2.00.img.gz, (187, 405) - (262, 480)
[Tue Aug 21 18:26:35 2012] XMMSAS bgd. selection expression = annulus(19447.641647, 38473.901520, 1087.500000, 2175.000000, X, Y) && !ellipse(19230.768234, 36193.202148, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 18:26:35 2012] Writing fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src3.gif
[Tue Aug 21 18:38:44 2012] Mean detx,y = (-3284.47, -12477.73) 
[Tue Aug 21 18:38:47 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 18:39:26 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 18:39:26 2012] Setting source spectrum file to fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Aug 21 18:39:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Aug 21 19:09:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 19:09:08 2012] rmf not generated due to insufficient counts
[Tue Aug 21 20:36:17 2012] Updating aperture counts using extracted products
[Tue Aug 21 20:36:17 2012] Error reading totcts from fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Aug 21 20:36:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 20:36:18 2012] Using photon index=1.80, rate=0.00514, arf fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src3.arf
[Tue Aug 21 20:36:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 20:36:18 2012] Getting flux using calc_pl_flux failed
[Tue Aug 21 20:37:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting