[Tue Aug 21 11:22:04 2012] Detection parameters:
  Position = (160.4, 268.0) = 12 36 52.32 19 15 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10369.7 +/- 128.3
  Background counts = 97.9
  Rate = 0.2 +/- 0.002

[Tue Aug 21 11:22:07 2012] Off-axis axis estimate = 10.24'
[Tue Aug 21 11:29:31 2012] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 11:29:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 11:29:31 2012] Initial guess for spatial extent in simple fitting = 11.55"
[Tue Aug 21 11:29:31 2012] source mask rpix=2.7, npix_max = 39, mask sum = 32, frac = 0.804
[Tue Aug 21 11:29:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.55"
[Tue Aug 21 12:56:25 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 21 12:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 12:56:25 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 21 12:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 12:56:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 12:56:25 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 21 12:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 21 12:56:25 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 21 12:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 21 12:56:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 15:10:55 2012] Spatial fit model total counts = 8077.780000, observed total counts = 5821.000000
[Tue Aug 21 15:10:55 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 21 15:10:55 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 15:10:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 15:10:55 2012] Assessing source extent using major
[Tue Aug 21 15:10:55 2012] Source does appear to be extended
[Tue Aug 21 15:10:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 15:11:23 2012] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 15:11:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 15:11:23 2012] Initial guess for spatial extent in simple fitting = 11.55"
[Tue Aug 21 15:11:23 2012] source mask rpix=2.7, npix_max = 39, mask sum = 32, frac = 0.804
[Tue Aug 21 15:11:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.55"
[Tue Aug 21 16:19:42 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 21 16:19:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 16:19:42 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 21 16:19:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 16:19:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 16:19:43 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 21 16:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 21 16:19:43 2012] fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 21 16:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 21 16:19:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 18:26:17 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.044705 pixels away
[Tue Aug 21 18:26:17 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 39.452313 pixels away
[Tue Aug 21 18:26:17 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 18:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 18:26:17 2012] Assessing source extent using major
[Tue Aug 21 18:26:17 2012] Source does appear to be extended
[Tue Aug 21 18:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 18:26:35 2012] Counts = 10369.676758, rescaling region sizes by 3.000000
[Tue Aug 21 18:26:35 2012] XMMSAS src. selection expression = ellipse(13910.534241, 23268.147827, 1957.500000, 1957.500000, 0.000000, X, Y)
[Tue Aug 21 18:26:35 2012] Writing source region out to fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 21 18:26:35 2012] Extracting stamp from image fullrun_pn_xmm0602920101_pi300-10000_cl_sm2.00.img.gz, (48, 156) - (273, 381)
[Tue Aug 21 18:26:35 2012] XMMSAS bgd. selection expression = annulus(13910.534241, 23268.147827, 9787.500000, 19575.000000, X, Y) && !ellipse(26344.231200, 27861.577860, 454.664099, 454.664099, 0.000000, X, Y) && !ellipse(19447.641647, 38473.901520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28034.283000, 38070.641800, 455.493613, 455.493613, 0.000000, X, Y) && !ellipse(9155.454603, 35896.508161, 1054.760827, 344.870916, 288.754969, X, Y) && !ellipse(18785.537762, 13865.100200, 728.892821, 296.062409, 217.170010, X, Y) && !ellipse(26069.437378, 19705.727753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12868.718002, 19240.248016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12680.341800, 18890.806000, 2004.240058, 2004.240058, 0.000000, X, Y) && !ellipse(19799.378601, 42694.089172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19230.768234, 36193.202148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26328.249634, 36069.573364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30534.527588, 35454.626099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32773.734161, 33115.505463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26152.603540, 32577.679000, 407.428812, 407.428812, 0.000000, X, Y) && !ellipse(25626.883820, 30663.835480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33981.273346, 30370.640594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27817.991400, 28210.641560, 355.779210, 355.779210, 0.000000, X, Y) && !ellipse(18203.007721, 26563.846313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11995.664036, 26084.079852, 539.568169, 218.768009, 76.079041, X, Y) && !ellipse(27152.567400, 25290.332200, 820.656024, 360.836010, 79.714934, X, Y) && !ellipse(28942.060800, 23024.254000, 417.628012, 417.628012, 0.000000, X, Y) && !ellipse(32345.493866, 22687.336273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32949.866150, 21086.437241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13194.529922, 19615.778015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12571.406000, 19208.704000, 1737.320050, 1737.320050, 0.000000, X, Y) && !ellipse(29044.201233, 18139.066650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34324.881927, 17246.374115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30047.868683, 17151.136887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23085.994232, 11593.214050, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 18:26:35 2012] Writing fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src1.gif
[Tue Aug 21 18:27:02 2012] Mean detx,y = (-13296.35, 159.38) 
[Tue Aug 21 18:27:10 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 18:36:40 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 18:36:41 2012] Setting source spectrum file to fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 18:36:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 21 19:02:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 19:02:57 2012] rmf not generated due to insufficient counts
[Tue Aug 21 20:36:17 2012] Updating aperture counts using extracted products
[Tue Aug 21 20:36:17 2012] Error reading totcts from fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 20:36:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 20:36:18 2012] Using photon index=1.80, rate=0.199, arf fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 20:36:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 20:36:18 2012] Updating source flux to 1.7e-12
[Tue Aug 21 20:37:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 21 20:38:44 2012] xmm0602920101/analysis//spectral/fullrun_pn_xmm0602920101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete