[Tue Aug 21 11:23:15 2012] Detection parameters:
  Position = (145.4, 218.9) = 12 36 56.93 19 11 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.4 +/- 20.1
  Background counts = 86.2
  Rate = 0.002 +/- 0.0004

[Tue Aug 21 11:23:16 2012] Off-axis axis estimate = 12.51'
[Tue Aug 21 13:52:31 2012] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 13:52:31 2012] Initial guess for spatial extent in simple fitting = 12.68"
[Tue Aug 21 13:52:31 2012] source mask rpix=2.9, npix_max = 46, mask sum = 40, frac = 0.857
[Tue Aug 21 13:52:31 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 12.68"
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src19.ximg exists
[Tue Aug 21 15:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src19.csv
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Aug 21 15:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src19.csv
[Tue Aug 21 15:10:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Aug 21 15:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Aug 21 15:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Aug 21 15:10:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 15:11:07 2012] Warning, spatial fit 19 centroid is now closest to src. 22
[Tue Aug 21 15:11:07 2012] Spatial fit model total counts = 532.605000, observed total counts = 490.000000
[Tue Aug 21 15:11:07 2012] Offset between fit and detection position for source 6 = 0.919182 pixels
[Tue Aug 21 15:11:07 2012] Warning, changing simple spatial fit ID from 19 to 23
[Tue Aug 21 15:11:07 2012] 531.967800 total counts/ 434.062000 bgd. counts: snr = 4.699293
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.919182 pixels
  Position = (145.9, 219.7) = 12 36 56.77 19 12 1.1
  Extent = 13.1 (5.2-22.4)", rotation angle = 0
  Source counts = 97.9 +/- 23.1
  Background counts = 434.1
  Rate = 0.002 +/- 0.0006
[Tue Aug 21 15:11:07 2012] Spatial fit model total counts = 573.257000, observed total counts = 550.000000
[Tue Aug 21 15:11:07 2012] Offset between fit and detection position for source 6 = 0.079344 pixels
[Tue Aug 21 15:11:07 2012] Warning, changing simple spatial fit ID from 23 to 25
[Tue Aug 21 15:11:07 2012] 530.991000 total counts/ 353.138000 bgd. counts: snr = 9.464310
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.079344 pixels
  Position = (146.0, 219.7) = 12 36 56.74 19 12 1.0
  Extent = 24.8 (24.8-49.7)", rotation angle = 0
  Source counts = 177.9 +/- 23.0
  Background counts = 353.1
  Rate = 0.005 +/- 0.0006
[Tue Aug 21 15:11:07 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 15:11:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 15:11:07 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 15:11:07 2012] Source does appear to be extended
[Tue Aug 21 15:11:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 15:11:07 2012] Source is confused with source 23
[Tue Aug 21 15:11:07 2012] Source is confused with source 21
[Tue Aug 21 15:11:07 2012] Source is confused with source 22
[Tue Aug 21 17:09:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 17:09:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 17:09:57 2012] Initial guess for spatial extent in simple fitting = 24.85"
[Tue Aug 21 17:09:57 2012] source mask rpix=5.7, npix_max = 154, mask sum = 145, frac = 0.940
[Tue Aug 21 17:09:57 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 24.85"
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src17.ximg exists
[Tue Aug 21 18:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src17.csv
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Aug 21 18:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src17.csv
[Tue Aug 21 18:26:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Aug 21 18:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Aug 21 18:26:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue Aug 21 18:26:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 18:26:25 2012] Warning, spatial fit 17 centroid is now closest to src. 21
[Tue Aug 21 18:26:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 18:26:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 18:26:25 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 18:26:25 2012] Source does appear to be extended
[Tue Aug 21 18:26:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 20:07:25 2012] XMMSAS src. selection expression = ellipse(12652.356000, 19061.428000, 1490.718043, 1490.718043, 0.000000, X, Y)
[Tue Aug 21 20:07:25 2012] Writing source region out to fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src6_src.reg
[Tue Aug 21 20:07:25 2012] Extracting stamp from image fullrun_mos2_xmm0602920101_pi300-10000_cl_sm2.00.img.gz, (60, 134) - (232, 305)
[Tue Aug 21 20:07:25 2012] XMMSAS bgd. selection expression = annulus(12652.356000, 19061.428000, 2484.530071, 4969.060143, X, Y) && !ellipse(13057.899460, 18467.707504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12333.738892, 19370.586060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12555.468000, 19176.188000, 2019.168058, 2019.168058, 0.000000, X, Y)
[Tue Aug 21 20:07:25 2012] Writing fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src6.gif
[Tue Aug 21 20:13:44 2012] Mean detx,y = (15683.34, -3943.54) 
[Tue Aug 21 20:13:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 20:14:35 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 20:14:36 2012] Setting source spectrum file to fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Aug 21 20:14:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Aug 21 20:36:21 2012] Updating aperture counts using extracted products
[Tue Aug 21 20:36:21 2012] Error reading totcts from fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Aug 21 20:36:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 20:36:22 2012] Using photon index=1.80, rate=0.00451, arf fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src6.arf
[Tue Aug 21 20:36:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 20:36:22 2012] Updating source flux to 1.4e-13
[Tue Aug 21 20:37:18 2012] Flag c found in src. 6 procflags, skipping spectral fitting