[Tue Aug 21 11:23:16 2012] Detection parameters:
  Position = (363.4, 272.7) = 12 35 49.97 19 15 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.1 +/- 21.0
  Background counts = 145.9
  Rate = 0.002 +/- 0.0005

[Tue Aug 21 11:23:16 2012] Off-axis axis estimate = 5.06'
[Tue Aug 21 13:52:31 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 13:52:31 2012] Initial guess for spatial extent in simple fitting = 8.96"
[Tue Aug 21 13:52:31 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.954
[Tue Aug 21 13:52:31 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.96"
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src18.ximg exists
[Tue Aug 21 15:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src18.csv
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Aug 21 15:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src18.csv
[Tue Aug 21 15:10:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Aug 21 15:10:45 2012] Fit fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Aug 21 15:11:07 2012] Source 19 is offset by 4.885168 and 7.983400 pixels which is larger than
2 X fitted extent = 1.029991 x 1.029991, not incorporating fit results
[Tue Aug 21 15:11:07 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 15:11:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 15:11:07 2012] Assessing source extent using major
[Tue Aug 21 15:11:07 2012] Source does appear to be extended
[Tue Aug 21 15:11:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 17:09:57 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 17:09:57 2012] Initial guess for spatial extent in simple fitting = 8.96"
[Tue Aug 21 17:09:57 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.954
[Tue Aug 21 17:09:57 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 8.96"
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src16.ximg exists
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Aug 21 18:26:09 2012] Fit fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src16 appears to have run properly
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Aug 21 18:26:09 2012] Fit fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Aug 21 18:26:25 2012] Source 19 is offset by 4.918087 and 7.983400 pixels which is larger than
2 X fitted extent = 1.029991 x 1.029991, not incorporating fit results
[Tue Aug 21 18:26:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 18:26:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 18:26:25 2012] Assessing source extent using major
[Tue Aug 21 18:26:25 2012] Source does appear to be extended
[Tue Aug 21 18:26:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 20:07:25 2012] XMMSAS src. selection expression = ellipse(31567.121582, 23680.181824, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 20:07:25 2012] Writing source region out to fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src19_src.reg
[Tue Aug 21 20:07:25 2012] Extracting stamp from image fullrun_mos2_xmm0602920101_pi300-10000_cl_sm2.00.img.gz, (326, 235) - (401, 310)
[Tue Aug 21 20:07:25 2012] XMMSAS bgd. selection expression = annulus(31567.121582, 23680.181824, 1087.500000, 2175.000000, X, Y)
[Tue Aug 21 20:07:25 2012] Writing fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src19.gif
[Tue Aug 21 20:13:17 2012] Mean detx,y = (-3517.62, -5483.46) 
[Tue Aug 21 20:13:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 20:13:40 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 20:13:40 2012] Setting source spectrum file to fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Aug 21 20:13:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Aug 21 20:25:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 20:25:58 2012] rmf not generated due to insufficient counts
[Tue Aug 21 20:36:21 2012] Updating aperture counts using extracted products
[Tue Aug 21 20:36:21 2012] Error reading totcts from fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Aug 21 20:36:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 20:36:22 2012] Using photon index=1.80, rate=0.00235, arf fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src19.arf
[Tue Aug 21 20:36:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 20:36:22 2012] Updating source flux to 2.9e-14
[Tue Aug 21 20:37:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting