[Tue Aug 21 11:23:15 2012] Detection parameters:
  Position = (222.4, 363.6) = 12 36 33.31 19 22 30.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.0 +/- 19.2
  Background counts = 130.2
  Rate = 0.003 +/- 0.0006

[Tue Aug 21 11:23:16 2012] Off-axis axis estimate = 7.26'
[Tue Aug 21 13:52:31 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 13:52:31 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Tue Aug 21 13:52:31 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.790
[Tue Aug 21 13:52:31 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.06"
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src11.ximg exists
[Tue Aug 21 15:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src11.csv
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Aug 21 15:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src11.csv
[Tue Aug 21 15:10:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Aug 21 15:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Aug 21 15:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Aug 21 15:10:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 15:11:07 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.063365 pixels away
[Tue Aug 21 15:11:07 2012] Spatial fit model total counts = 276.597000, observed total counts = 272.000000
[Tue Aug 21 15:11:07 2012] Offset between fit and detection position for source 15 = 2.466871 pixels
[Tue Aug 21 15:11:07 2012] Warning, changing simple spatial fit ID from 11 to 15
[Tue Aug 21 15:11:07 2012] 287.326000 total counts/ 162.932000 bgd. counts: snr = 9.745323
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 2.466871 pixels
  Position = (220.1, 364.6) = 12 36 34.00 19 22 32.0
  Extent = 19.9 (19.9-39.9)", rotation angle = 0
  Source counts = 124.4 +/- 17.0
  Background counts = 162.9
  Rate = 0.003 +/- 0.0004
[Tue Aug 21 15:11:07 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 15:11:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 15:11:07 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 15:11:07 2012] Source does appear to be extended
[Tue Aug 21 15:11:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 15:11:07 2012] Source is confused with source 13
[Tue Aug 21 17:09:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 17:09:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 17:09:57 2012] Initial guess for spatial extent in simple fitting = 19.93"
[Tue Aug 21 17:09:57 2012] source mask rpix=4.6, npix_max = 103, mask sum = 74, frac = 0.716
[Tue Aug 21 17:09:57 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 19.93"
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src9.ximg exists
[Tue Aug 21 18:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src9.csv
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Aug 21 18:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src9.csv
[Tue Aug 21 18:26:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Aug 21 18:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Aug 21 18:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Aug 21 18:26:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 18:26:25 2012] Spatial fit model total counts = 1285.640000, observed total counts = 1106.000000
[Tue Aug 21 18:26:25 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 21 18:26:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 18:26:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 18:26:25 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 18:26:25 2012] Source does appear to be extended
[Tue Aug 21 18:26:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 20:07:25 2012] XMMSAS src. selection expression = ellipse(19103.720000, 31675.521000, 1196.076034, 1196.076034, 0.000000, X, Y)
[Tue Aug 21 20:07:25 2012] Writing source region out to fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src15_src.reg
[Tue Aug 21 20:07:25 2012] Extracting stamp from image fullrun_mos2_xmm0602920101_pi300-10000_cl_sm2.00.img.gz, (151, 296) - (289, 433)
[Tue Aug 21 20:07:25 2012] XMMSAS bgd. selection expression = annulus(19103.720000, 31675.521000, 1993.460057, 3986.920115, X, Y) && !ellipse(19714.972565, 31719.206970, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 20:07:25 2012] Writing fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src15.gif
[Tue Aug 21 20:10:11 2012] Mean detx,y = (5784.44, 5905.03) 
[Tue Aug 21 20:10:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 20:10:52 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 20:10:53 2012] Setting source spectrum file to fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Aug 21 20:10:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Aug 21 20:36:21 2012] Updating aperture counts using extracted products
[Tue Aug 21 20:36:21 2012] Error reading totcts from fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Aug 21 20:36:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 20:36:22 2012] Using photon index=1.80, rate=0.00315, arf fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src15.arf
[Tue Aug 21 20:36:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 20:36:22 2012] Updating source flux to 5.1e-14
[Tue Aug 21 20:37:18 2012] Flag p found in src. 15 procflags, skipping spectral fitting
[Tue Aug 21 20:37:18 2012] Flag c found in src. 15 procflags, skipping spectral fitting