[Tue Aug 21 11:23:15 2012] Detection parameters:
  Position = (303.5, 321.1) = 12 36 8.36 19 19 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5683.3 +/- 92.6
  Background counts = 160.5
  Rate = 0.1 +/- 0.002

[Tue Aug 21 11:23:16 2012] Off-axis axis estimate = 1.69'
[Tue Aug 21 13:52:31 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 13:52:31 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Aug 21 13:52:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.795
[Tue Aug 21 13:52:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 21 15:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 21 15:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 15:10:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 21 15:10:45 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 21 15:10:45 2012] Fit fullrun_mos2_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 21 15:11:07 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Tue Aug 21 15:11:07 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 15:11:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 15:11:07 2012] Assessing source extent using major
[Tue Aug 21 15:11:07 2012] Source does appear to be extended
[Tue Aug 21 15:11:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 15:11:07 2012] Source is confused with source 3
[Tue Aug 21 17:09:57 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 17:09:57 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Aug 21 17:09:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.795
[Tue Aug 21 17:09:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 21 18:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 21 18:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 18:26:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 21 18:26:09 2012] fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 21 18:26:09 2012] Fit fullrun_mos2_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 21 18:26:25 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Tue Aug 21 18:26:25 2012] Spatial fit model total counts = 3191.350000, observed total counts = 2979.000000
[Tue Aug 21 18:26:25 2012] Offset between fit and detection position for source 1 = 0.976448 pixels
[Tue Aug 21 18:26:25 2012] Warning, changing simple spatial fit ID from 1 to 2
[Tue Aug 21 18:26:25 2012] 3216.730000 total counts/ 1641.100000 bgd. counts: snr = 38.894368
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.976448 pixels
  Position = (303.4, 322.1) = 12 36 8.40 19 19 27.0
  Extent = 4.3 (4.2-4.4)", rotation angle = 0
  Source counts = 1575.6 +/- 56.7
  Background counts = 1641.1
  Rate = 0.04 +/- 0.001
[Tue Aug 21 18:26:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 18:26:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 18:26:25 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 18:26:25 2012] Source does appear to be extended
[Tue Aug 21 18:26:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 20:07:25 2012] Counts = 1575.630000, rescaling region sizes by 2.000000
[Tue Aug 21 20:07:25 2012] XMMSAS src. selection expression = ellipse(26347.680000, 27973.740000, 515.821215, 515.821215, 0.000000, X, Y)
[Tue Aug 21 20:07:25 2012] Writing source region out to fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 21 20:07:25 2012] Extracting stamp from image fullrun_mos2_xmm0602920101_pi300-10000_cl_sm2.00.img.gz, (274, 292) - (333, 352)
[Tue Aug 21 20:07:25 2012] XMMSAS bgd. selection expression = annulus(26347.680000, 27973.740000, 1719.404049, 3438.808099, X, Y) && !ellipse(26156.734741, 28498.467926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27813.109600, 28183.361800, 346.097610, 346.097610, 0.000000, X, Y)
[Tue Aug 21 20:07:25 2012] Writing fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src1.gif
[Tue Aug 21 20:07:31 2012] Mean detx,y = (162.32, 114.92) 
[Tue Aug 21 20:07:34 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 20:07:48 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 20:07:49 2012] Setting source spectrum file to fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 20:07:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 21 20:36:21 2012] Updating aperture counts using extracted products
[Tue Aug 21 20:36:21 2012] Error reading totcts from fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 20:36:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 20:36:22 2012] Using photon index=1.80, rate=0.0399, arf fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 20:36:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 20:36:22 2012] Updating source flux to 4.5e-13
[Tue Aug 21 20:37:18 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Aug 21 20:37:54 2012] Reading fit data from xmm0602920101/analysis//spectral/fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 21 20:37:54 2012] Spectral fit parameter nH value = 1.77962e+21
[Tue Aug 21 20:37:54 2012] Spectral fit parameter PhoIndex value = 1.76157
[Tue Aug 21 20:37:54 2012] Failed to get F(0.3-8.0) from xmm0602920101/analysis//spectral/fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 21 20:37:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 20:37:54 2012] Using Nh = 1.8e+21, photon index=1.76, rate=0.0399, arf fullrun_mos2_xmm0602920101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 20:37:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 20:37:54 2012] Updating source flux to 5.4e-13