[Tue Aug 21 11:22:42 2012] Detection parameters:
  Position = (333.2, 265.0) = 12 35 59.26 19 15 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.7 +/- 26.3
  Background counts = 163.5
  Rate = 0.006 +/- 0.0006

[Tue Aug 21 11:22:43 2012] Off-axis axis estimate = 3.49'
[Tue Aug 21 12:56:25 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 12:56:25 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Tue Aug 21 12:56:25 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.883
[Tue Aug 21 12:56:25 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.18"
[Tue Aug 21 13:52:30 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Aug 21 13:52:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src4.csv
[Tue Aug 21 13:52:30 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Aug 21 13:52:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src4.csv
[Tue Aug 21 13:52:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 13:52:30 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Aug 21 13:52:30 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Aug 21 13:52:30 2012] Fit fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Aug 21 15:11:01 2012] Spatial fit model total counts = 390.683000, observed total counts = 387.000000
[Tue Aug 21 15:11:01 2012] Offset between fit and detection position for source 21 = 0.178698 pixels
[Tue Aug 21 15:11:01 2012] 393.959000 total counts/ 288.940000 bgd. counts: snr = 6.178230
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.178698 pixels
  Position = (333.0, 264.9) = 12 35 59.30 19 15 18.3
  Extent = 5.6 (4.3-6.7)", rotation angle = 0
  Source counts = 105.0 +/- 19.8
  Background counts = 288.9
  Rate = 0.003 +/- 0.0005
[Tue Aug 21 15:11:01 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 15:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 15:11:01 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 15:11:01 2012] Source does appear to be extended
[Tue Aug 21 15:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 16:19:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 16:19:43 2012] Initial guess for spatial extent in simple fitting = 5.56"
[Tue Aug 21 16:19:43 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.265
[Tue Aug 21 16:19:43 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.56"
[Tue Aug 21 17:09:57 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src4.ximg exists
[Tue Aug 21 17:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src4.csv
[Tue Aug 21 17:09:57 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Aug 21 17:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src4.csv
[Tue Aug 21 17:09:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 17:09:57 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Aug 21 17:09:57 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Aug 21 17:09:57 2012] Fit fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Aug 21 18:26:21 2012] Spatial fit model total counts = 390.686000, observed total counts = 387.000000
[Tue Aug 21 18:26:21 2012] Offset between fit and detection position for source 21 = 0.000097 pixels
[Tue Aug 21 18:26:21 2012] 393.959000 total counts/ 288.977000 bgd. counts: snr = 6.175658
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.000097 pixels
  Position = (333.0, 264.9) = 12 35 59.30 19 15 18.3
  Extent = 5.6 (4.3-6.7)", rotation angle = 0
  Source counts = 105.0 +/- 19.8
  Background counts = 289.0
  Rate = 0.003 +/- 0.0005
[Tue Aug 21 18:26:21 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 18:26:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 18:26:21 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 18:26:21 2012] Source does appear to be extended
[Tue Aug 21 18:26:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 19:35:35 2012] XMMSAS src. selection expression = ellipse(28926.039520, 22999.682200, 333.355491, 333.355491, 0.000000, X, Y)
[Tue Aug 21 19:35:35 2012] Writing source region out to fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src21_src.reg
[Tue Aug 21 19:35:35 2012] Extracting stamp from image fullrun_mos1_xmm0602920101_pi300-10000_cl_sm2.00.img.gz, (314, 246) - (352, 284)
[Tue Aug 21 19:35:35 2012] XMMSAS bgd. selection expression = annulus(28926.039520, 22999.682200, 555.592485, 1111.184969, X, Y)
[Tue Aug 21 19:35:35 2012] Writing fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src21.gif
[Tue Aug 21 19:36:21 2012] Mean detx,y = (-5121.87, 567.62) 
[Tue Aug 21 19:36:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 19:36:28 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 19:36:28 2012] Setting source spectrum file to fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Aug 21 19:36:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Aug 21 20:36:20 2012] Updating aperture counts using extracted products
[Tue Aug 21 20:36:20 2012] Error reading totcts from fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Aug 21 20:36:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 20:36:20 2012] Using photon index=1.80, rate=0.00272, arf fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src21.arf
[Tue Aug 21 20:36:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 20:36:20 2012] Updating source flux to 4.1e-14