[Tue Aug 21 11:22:41 2012] Detection parameters:
  Position = (301.2, 328.7) = 12 36 9.09 19 19 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 858.1 +/- 41.6
  Background counts = 184.3
  Rate = 0.02 +/- 0.0008

[Tue Aug 21 11:22:43 2012] Off-axis axis estimate = 2.20'
[Tue Aug 21 12:56:25 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 12:56:25 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Tue Aug 21 12:56:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.005
[Tue Aug 21 12:56:25 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.53"
[Tue Aug 21 13:52:30 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Aug 21 13:52:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src3.csv
[Tue Aug 21 13:52:30 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Aug 21 13:52:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src3.csv
[Tue Aug 21 13:52:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 13:52:30 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Aug 21 13:52:30 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Aug 21 13:52:30 2012] Fit fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Aug 21 15:11:01 2012] Source 2 is offset by -2.212624 and 6.580329 pixels which is larger than
2 X fitted extent = 1.910202 x 1.910202, not incorporating fit results
[Tue Aug 21 15:11:01 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 15:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 15:11:01 2012] Assessing source extent using major
[Tue Aug 21 15:11:01 2012] Source does appear to be extended
[Tue Aug 21 15:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 16:19:43 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 16:19:43 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Tue Aug 21 16:19:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.005
[Tue Aug 21 16:19:43 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.53"
[Tue Aug 21 17:09:57 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Aug 21 17:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src3.csv
[Tue Aug 21 17:09:57 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Aug 21 17:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src3.csv
[Tue Aug 21 17:09:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 17:09:57 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Aug 21 17:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Aug 21 17:09:57 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Aug 21 17:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Aug 21 17:09:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 18:26:21 2012] Source 2 is offset by -4.935981 and 4.769110 pixels which is larger than
2 X fitted extent = 0.652158 x 0.638952, not incorporating fit results
[Tue Aug 21 18:26:21 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 18:26:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 18:26:21 2012] Assessing source extent using major
[Tue Aug 21 18:26:21 2012] Source does appear to be extended
[Tue Aug 21 18:26:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 19:35:35 2012] XMMSAS src. selection expression = ellipse(26153.779694, 28544.702606, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 19:35:35 2012] Writing source region out to fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug 21 19:35:35 2012] Extracting stamp from image fullrun_mos1_xmm0602920101_pi300-10000_cl_sm2.00.img.gz, (264, 291) - (339, 366)
[Tue Aug 21 19:35:35 2012] XMMSAS bgd. selection expression = annulus(26153.779694, 28544.702606, 1087.500000, 2175.000000, X, Y) && !ellipse(26346.470600, 27856.050600, 426.940812, 426.940812, 0.000000, X, Y) && !ellipse(27857.171600, 28202.636800, 343.567564, 343.567564, 0.000000, X, Y)
[Tue Aug 21 19:35:35 2012] Writing fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src2.gif
[Tue Aug 21 19:36:08 2012] Mean detx,y = (736.69, -318.22) 
[Tue Aug 21 19:36:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 19:36:17 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 19:36:17 2012] Setting source spectrum file to fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 21 19:36:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug 21 19:52:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 19:52:31 2012] rmf not generated due to insufficient counts
[Tue Aug 21 20:36:20 2012] Updating aperture counts using extracted products
[Tue Aug 21 20:36:20 2012] Error reading totcts from fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 21 20:36:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 20:36:20 2012] Using photon index=1.80, rate=0.0162, arf fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src2.arf
[Tue Aug 21 20:36:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 20:36:20 2012] Updating source flux to 1.6e-13
[Tue Aug 21 20:36:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting