[Tue Aug 21 11:22:41 2012] Detection parameters:
  Position = (303.5, 320.9) = 12 36 8.36 19 19 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6205.6 +/- 96.8
  Background counts = 184.8
  Rate = 0.1 +/- 0.002

[Tue Aug 21 11:22:43 2012] Off-axis axis estimate = 1.67'
[Tue Aug 21 12:56:25 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 12:56:25 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Tue Aug 21 12:56:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Tue Aug 21 12:56:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Tue Aug 21 13:52:30 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 21 13:52:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 13:52:30 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 21 13:52:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 13:52:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 13:52:30 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 21 13:52:30 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 21 13:52:30 2012] Fit fullrun_mos1_xmm0602920101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 21 15:11:01 2012] Spatial fit model total counts = 4490.000000, observed total counts = 4490.000000
[Tue Aug 21 15:11:01 2012] Offset between fit and detection position for source 1 = 0.193551 pixels
[Tue Aug 21 15:11:01 2012] 4497.960000 total counts/ 1531.030000 bgd. counts: snr = 75.825529
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.193551 pixels
  Position = (303.4, 320.7) = 12 36 8.41 19 19 21.1
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 2966.9 +/- 67.1
  Background counts = 1531.0
  Rate = 0.08 +/- 0.002
[Tue Aug 21 15:11:01 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 15:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 15:11:01 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 15:11:01 2012] Source does appear to be extended
[Tue Aug 21 15:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 16:19:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 16:19:43 2012] Initial guess for spatial extent in simple fitting = 5.29"
[Tue Aug 21 16:19:43 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.765
[Tue Aug 21 16:19:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.29"
[Tue Aug 21 17:09:57 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 21 17:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 17:09:57 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 21 17:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 17:09:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 17:09:57 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 21 17:09:57 2012] fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 21 17:09:57 2012] Fit fullrun_mos1_xmm0602920101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 21 18:26:21 2012] Spatial fit model total counts = 4340.010000, observed total counts = 4340.000000
[Tue Aug 21 18:26:21 2012] Offset between fit and detection position for source 1 = 0.001745 pixels
[Tue Aug 21 18:26:21 2012] 4363.550000 total counts/ 1376.630000 bgd. counts: snr = 80.503540
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001745 pixels
  Position = (303.4, 320.7) = 12 36 8.41 19 19 21.1
  Extent = 5.3 (5.2-5.5)", rotation angle = 0
  Source counts = 2986.9 +/- 66.1
  Background counts = 1376.6
  Rate = 0.08 +/- 0.002
[Tue Aug 21 18:26:21 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 18:26:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 18:26:21 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 18:26:21 2012] Source does appear to be extended
[Tue Aug 21 18:26:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 19:35:35 2012] Counts = 2986.920000, rescaling region sizes by 2.000000
[Tue Aug 21 19:35:35 2012] XMMSAS src. selection expression = ellipse(26346.470600, 27856.050600, 640.411218, 640.411218, 0.000000, X, Y)
[Tue Aug 21 19:35:35 2012] Writing source region out to fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 21 19:35:35 2012] Extracting stamp from image fullrun_mos1_xmm0602920101_pi300-10000_cl_sm2.00.img.gz, (267, 284) - (340, 358)
[Tue Aug 21 19:35:35 2012] XMMSAS bgd. selection expression = annulus(26346.470600, 27856.050600, 2134.704061, 4269.408123, X, Y) && !ellipse(26153.779694, 28544.702606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27857.171600, 28202.636800, 343.567564, 343.567564, 0.000000, X, Y)
[Tue Aug 21 19:35:35 2012] Writing fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src1.gif
[Tue Aug 21 19:35:39 2012] Mean detx,y = (313.55, -341.98) 
[Tue Aug 21 19:35:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 19:35:54 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 19:35:54 2012] Setting source spectrum file to fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 19:35:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 21 20:36:19 2012] Updating aperture counts using extracted products
[Tue Aug 21 20:36:20 2012] Error reading totcts from fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 20:36:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 20:36:20 2012] Using photon index=1.80, rate=0.0774, arf fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 20:36:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 20:36:20 2012] Updating source flux to 7.4e-13
[Tue Aug 21 20:37:18 2012] Reading fit data from xmm0602920101/analysis//spectral/fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 21 20:37:18 2012] Spectral fit parameter nH value = 1.66776e+21
[Tue Aug 21 20:37:18 2012] Spectral fit parameter PhoIndex value = 1.74957
[Tue Aug 21 20:37:18 2012] Failed to get F(0.3-8.0) from xmm0602920101/analysis//spectral/fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 21 20:37:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 20:37:18 2012] Using Nh = 1.7e+21, photon index=1.75, rate=0.0774, arf fullrun_mos1_xmm0602920101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 20:37:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 20:37:18 2012] Updating source flux to 8.9e-13