[Sat Aug 25 10:14:52 2012] Detection parameters:
  Position = (277.0, 288.9) = 19 30 13.74 34 10 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3795.1 +/- 73.9
  Background counts = 37.1
  Rate = 0.3 +/- 0.006

[Sat Aug 25 10:14:53 2012] Off-axis axis estimate = 1.70'
[Sat Aug 25 10:17:14 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 10:17:14 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Aug 25 10:17:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Aug 25 10:17:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.28"
[Sat Aug 25 10:43:32 2012] fullrun_pn_xmm0602840101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Aug 25 10:43:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602840101_pi300-10000_cl_pass0_src3.csv
[Sat Aug 25 10:43:32 2012] fullrun_pn_xmm0602840101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Aug 25 10:43:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602840101_pi300-10000_cl_pass0_src3.csv
[Sat Aug 25 10:43:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602840101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602840101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:43:32 2012] fullrun_pn_xmm0602840101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Aug 25 10:43:32 2012] fullrun_pn_xmm0602840101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Aug 25 10:43:32 2012] Fit fullrun_pn_xmm0602840101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Aug 25 11:19:05 2012] Spatial fit model total counts = 3375.110000, observed total counts = 3320.000000
[Sat Aug 25 11:19:05 2012] Offset between fit and detection position for source 3 = 0.110353 pixels
[Sat Aug 25 11:19:05 2012] 3372.238000 total counts/ 927.548000 bgd. counts: snr = 80.270432
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.110353 pixels
  Position = (277.0, 288.8) = 19 30 13.73 34 10 47.7
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 2444.7 +/- 58.1
  Background counts = 927.5
  Rate = 0.2 +/- 0.004
[Sat Aug 25 11:19:05 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 11:19:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 11:19:05 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 11:19:05 2012] Source does appear to be extended
[Sat Aug 25 11:19:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 11:19:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 25 11:19:18 2012] Initial guess for spatial extent in simple fitting = 5.59"
[Sat Aug 25 11:19:18 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.255
[Sat Aug 25 11:19:18 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.59"
[Sat Aug 25 11:45:54 2012] fullrun_pn_xmm0602840101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Aug 25 11:45:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602840101_pi300-10000_cl_pass1_src3.csv
[Sat Aug 25 11:45:54 2012] fullrun_pn_xmm0602840101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Aug 25 11:45:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602840101_pi300-10000_cl_pass1_src3.csv
[Sat Aug 25 11:45:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602840101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602840101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 11:45:55 2012] fullrun_pn_xmm0602840101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Aug 25 11:45:55 2012] fullrun_pn_xmm0602840101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Aug 25 11:45:55 2012] Fit fullrun_pn_xmm0602840101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Aug 25 12:22:44 2012] Warning, spatial fit 3 centroid is now closest to src. 15
[Sat Aug 25 12:22:44 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 12:22:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 12:22:44 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 12:22:44 2012] Source does appear to be extended
[Sat Aug 25 12:22:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 12:22:55 2012] Counts = 2444.690000, rescaling region sizes by 2.000000
[Sat Aug 25 12:22:55 2012] XMMSAS src. selection expression = ellipse(24054.629400, 25076.580100, 670.761619, 670.761619, 0.000000, X, Y)
[Sat Aug 25 12:22:55 2012] Writing source region out to fullrun_pn_xmm0602840101_pi300-10000_pass1_cl_src3_src.reg
[Sat Aug 25 12:22:55 2012] Extracting stamp from image fullrun_pn_xmm0602840101_pi300-10000_cl_sm2.00.img.gz, (238, 250) - (316, 327)
[Sat Aug 25 12:22:55 2012] XMMSAS bgd. selection expression = annulus(24054.629400, 25076.580100, 2235.872064, 4471.744129, X, Y) && !ellipse(28172.409088, 28841.654358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20371.963547, 27707.765686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27002.988159, 23877.211548, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 12:22:55 2012] Writing fullrun_pn_xmm0602840101_pi300-10000_pass1_cl_src3.gif
[Sat Aug 25 12:24:42 2012] Mean detx,y = (15.75, -263.26) 
[Sat Aug 25 12:24:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 12:25:56 2012] grppha failed
[Sat Aug 25 12:25:56 2012] Setting source spectrum file to fullrun_pn_xmm0602840101_pi300-10000_pass1_cl_src3_src.pi.gz
[Sat Aug 25 12:25:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602840101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Aug 25 12:46:13 2012] Updating aperture counts using extracted products
[Sat Aug 25 12:46:13 2012] Error reading totcts from fullrun_pn_xmm0602840101_pi300-10000_pass1_cl_src3_src.pi.gz
[Sat Aug 25 12:46:13 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 12:46:16 2012] Source 3 has no response, skipping
[Sat Aug 25 12:46:17 2012] xmm0602840101/analysis//spectral/fullrun_pn_xmm0602840101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete