[Sat Aug 25 10:15:41 2012] Detection parameters:
  Position = (346.7, 242.1) = 19 29 49.32 34 7 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.7 +/- 8.4
  Background counts = 9.5
  Rate = 0.003 +/- 0.0008

[Sat Aug 25 10:15:41 2012] Off-axis axis estimate = 5.38'
[Sat Aug 25 10:58:56 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 10:58:56 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Sat Aug 25 10:58:56 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.928
[Sat Aug 25 10:58:56 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.12"
[Sat Aug 25 11:19:00 2012] fullrun_mos2_xmm0602840101_pi300-10000_cl_pass0_src12.ximg exists
[Sat Aug 25 11:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602840101_pi300-10000_cl_pass0_src12.csv
[Sat Aug 25 11:19:00 2012] fullrun_mos2_xmm0602840101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Aug 25 11:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602840101_pi300-10000_cl_pass0_src12.csv
[Sat Aug 25 11:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602840101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602840101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 11:19:00 2012] fullrun_mos2_xmm0602840101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Aug 25 11:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602840101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Aug 25 11:19:00 2012] fullrun_mos2_xmm0602840101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Aug 25 11:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602840101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Aug 25 11:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602840101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602840101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 11:19:10 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.017628 pixels away
[Sat Aug 25 11:19:11 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 11:19:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 11:19:11 2012] Assessing source extent using major
[Sat Aug 25 11:19:11 2012] Source does appear to be extended
[Sat Aug 25 11:19:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 12:03:00 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 12:03:00 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Sat Aug 25 12:03:00 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.928
[Sat Aug 25 12:03:00 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 9.12"
[Sat Aug 25 12:22:38 2012] fullrun_mos2_xmm0602840101_pi300-10000_cl_pass1_src12.ximg exists
[Sat Aug 25 12:22:38 2012] fullrun_mos2_xmm0602840101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Aug 25 12:22:38 2012] Fit fullrun_mos2_xmm0602840101_pi300-10000_cl_pass1_src12 appears to have run properly
[Sat Aug 25 12:22:39 2012] fullrun_mos2_xmm0602840101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Aug 25 12:22:39 2012] fullrun_mos2_xmm0602840101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Aug 25 12:22:39 2012] Fit fullrun_mos2_xmm0602840101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Aug 25 12:22:48 2012] Spatial fit model total counts = 130.947000, observed total counts = 126.000000
[Sat Aug 25 12:22:48 2012] Offset between fit and detection position for source 14 = 0.720103 pixels
[Sat Aug 25 12:22:48 2012] 130.920500 total counts/ 81.050900 bgd. counts: snr = 5.539326
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.720103 pixels
  Position = (346.7, 242.9) = 19 29 49.32 34 7 27.9
  Extent = 10.2 (2.8-16.4)", rotation angle = 0
  Source counts = 49.9 +/- 11.4
  Background counts = 81.1
  Rate = 0.003 +/- 0.0007
[Sat Aug 25 12:22:48 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 12:22:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 12:22:48 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 12:22:48 2012] Source does appear to be extended
[Sat Aug 25 12:22:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 12:41:50 2012] XMMSAS src. selection expression = ellipse(30115.976400, 21080.958780, 609.606018, 609.606018, 0.000000, X, Y)
[Sat Aug 25 12:41:50 2012] Writing source region out to fullrun_mos2_xmm0602840101_pi300-10000_pass1_cl_src14_src.reg
[Sat Aug 25 12:41:50 2012] Extracting stamp from image fullrun_mos2_xmm0602840101_pi300-10000_cl_sm2.00.img.gz, (312, 208) - (382, 278)
[Sat Aug 25 12:41:50 2012] XMMSAS bgd. selection expression = annulus(30115.976400, 21080.958780, 1016.010029, 2032.020058, X, Y) && !ellipse(28550.325047, 19271.516274, 740.945513, 474.835847, 351.505676, X, Y)
[Sat Aug 25 12:41:50 2012] Writing fullrun_mos2_xmm0602840101_pi300-10000_pass1_cl_src14.gif
[Sat Aug 25 12:44:48 2012] Mean detx,y = (7391.01, -41.11) 
[Sat Aug 25 12:44:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 12:45:09 2012] grppha failed
[Sat Aug 25 12:45:09 2012] Setting source spectrum file to fullrun_mos2_xmm0602840101_pi300-10000_pass1_cl_src14_src.pi.gz
[Sat Aug 25 12:45:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602840101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Aug 25 12:45:46 2012] Not generating rmf since there are only 49 counts
[Sat Aug 25 12:45:46 2012] rmf not generated due to insufficient counts
[Sat Aug 25 12:46:13 2012] Updating aperture counts using extracted products
[Sat Aug 25 12:46:13 2012] Error reading totcts from fullrun_mos2_xmm0602840101_pi300-10000_pass1_cl_src14_src.pi.gz
[Sat Aug 25 12:46:14 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 12:46:15 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Aug 25 12:46:16 2012] xmm0602840101/analysis//spectral/fullrun_mos2_xmm0602840101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete