[Fri May 18 23:40:33 2012] Detection parameters:
  Position = (193.1, 131.1) = 0 25 45.43 47 51 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.8 +/- 9.3
  Background counts = 5.7
  Rate = 0.01 +/- 0.002

[Fri May 18 23:40:33 2012] Off-axis axis estimate = 14.34'
[Fri May 18 23:41:42 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Fri May 18 23:41:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 18 23:41:42 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Fri May 18 23:41:42 2012] source mask rpix=3.1, npix_max = 52, mask sum = 58, frac = 1.103
[Fri May 18 23:41:42 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 13.60"
[Sat May 19 00:03:49 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src2.ximg exists
[Sat May 19 00:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src2.csv
[Sat May 19 00:03:49 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May 19 00:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src2.csv
[Sat May 19 00:03:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:03:49 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May 19 00:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May 19 00:03:49 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 19 00:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May 19 00:03:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:23:41 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.688104 pixels away
[Sat May 19 00:23:41 2012] Vigneting correction estimate = 1.000000
[Sat May 19 00:23:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 00:23:41 2012] Assessing source extent using major
[Sat May 19 00:23:41 2012] Source does appear to be extended
[Sat May 19 00:23:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 00:23:48 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Sat May 19 00:23:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 00:23:48 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Sat May 19 00:23:48 2012] source mask rpix=3.1, npix_max = 52, mask sum = 58, frac = 1.103
[Sat May 19 00:23:48 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 13.60"
[Sat May 19 00:45:32 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src2.ximg exists
[Sat May 19 00:45:32 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat May 19 00:45:32 2012] Fit fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src2 appears to have run properly
[Sat May 19 00:45:32 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat May 19 00:45:32 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May 19 00:45:32 2012] Fit fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat May 19 01:06:28 2012] Spatial fit model total counts = 140.075000, observed total counts = 129.000000
[Sat May 19 01:06:28 2012] Offset between fit and detection position for source 2 = 0.235317 pixels
[Sat May 19 01:06:28 2012] 141.901700 total counts/ 108.133000 bgd. counts: snr = 3.247396
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.235317 pixels
  Position = (193.3, 131.0) = 0 25 45.33 47 51 34.2
  Extent = 5.7 (4.3-8.9)", rotation angle = 0
  Source counts = 33.8 +/- 11.9
  Background counts = 108.1
  Rate = 0.007 +/- 0.002
[Sat May 19 01:06:28 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:06:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:06:28 2012] Assessing source extent using major axis lower bound
[Sat May 19 01:06:28 2012] Source does appear to be extended
[Sat May 19 01:06:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:06:36 2012] XMMSAS src. selection expression = ellipse(16768.112800, 11350.132400, 344.008810, 344.008810, 0.000000, X, Y)
[Sat May 19 01:06:36 2012] Writing source region out to fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src2_src.reg
[Sat May 19 01:06:36 2012] Extracting stamp from image fullrun_pn_xmm0602830501_pi300-10000_cl_sm2.00.img.gz, (174, 111) - (213, 151)
[Sat May 19 01:06:36 2012] XMMSAS bgd. selection expression = annulus(16768.112800, 11350.132400, 573.348016, 1146.696033, X, Y) && !ellipse(17084.441223, 13309.648010, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 01:06:36 2012] Writing fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src2.gif
[Sat May 19 01:07:16 2012] Mean detx,y = (993.27, -15591.60) 
[Sat May 19 01:07:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 01:07:29 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 01:07:30 2012] Setting source spectrum file to fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 19 01:07:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat May 19 01:14:59 2012] Not generating rmf since there are only 33 counts
[Sat May 19 01:14:59 2012] rmf not generated due to insufficient counts
[Sat May 19 01:34:58 2012] Updating aperture counts using extracted products
[Sat May 19 01:34:58 2012] Error reading totcts from fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 19 01:34:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 01:34:59 2012] Using photon index=1.80, rate=0.00671, arf fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src2.arf
[Sat May 19 01:34:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 01:34:59 2012] Updating source flux to 6.9e-14
[Sat May 19 01:35:07 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 19 01:35:08 2012] xmm0602830501/analysis//spectral/fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete