[Fri May 18 23:40:33 2012] Detection parameters:
  Position = (367.2, 397.8) = 0 24 29.99 48 10 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.9 +/- 8.2
  Background counts = 5.6
  Rate = 0.008 +/- 0.002

[Fri May 18 23:40:33 2012] Off-axis axis estimate = 8.76'
[Fri May 18 23:41:42 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Fri May 18 23:41:42 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Fri May 18 23:41:42 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.010
[Fri May 18 23:41:42 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.81"
[Sat May 19 00:03:49 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src17.ximg exists
[Sat May 19 00:03:49 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat May 19 00:03:49 2012] Fit fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src17 appears to have run properly
[Sat May 19 00:03:49 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat May 19 00:03:49 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat May 19 00:03:49 2012] Fit fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat May 19 00:23:41 2012] Spatial fit model total counts = 76.732000, observed total counts = 70.000000
[Sat May 19 00:23:41 2012] Offset between fit and detection position for source 18 = 0.158550 pixels
[Sat May 19 00:23:41 2012] 77.147500 total counts/ 47.078800 bgd. counts: snr = 4.382299
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.158550 pixels
  Position = (367.0, 397.8) = 0 24 30.06 48 10 54.9
  Extent = 5.9 (3.6-8.1)" x 3.3 (2.7-4.8)", rotation angle = 224 (183-247) degrees
  Source counts = 30.1 +/- 8.8
  Background counts = 47.1
  Rate = 0.006 +/- 0.002
[Sat May 19 00:23:41 2012] Vigneting correction estimate = 1.000000
[Sat May 19 00:23:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 00:23:41 2012] Assessing source extent using major axis lower bound
[Sat May 19 00:23:41 2012] Source does appear to be extended
[Sat May 19 00:23:41 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.76
[Sat May 19 00:23:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 00:23:48 2012] Initial guess for spatial extent in simple fitting = 4.58"
[Sat May 19 00:23:48 2012] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.244
[Sat May 19 00:23:48 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 4.58"
[Sat May 19 00:45:32 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src17.ximg exists
[Sat May 19 00:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src17.csv
[Sat May 19 00:45:32 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat May 19 00:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src17.csv
[Sat May 19 00:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:45:33 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat May 19 00:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat May 19 00:45:33 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat May 19 00:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat May 19 00:45:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:06:28 2012] Spatial fit model total counts = 86.030300, observed total counts = 68.000000
[Sat May 19 01:06:28 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 19 01:06:28 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:06:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:06:28 2012] Assessing source extent using major axis lower bound
[Sat May 19 01:06:28 2012] Source does appear to be extended
[Sat May 19 01:06:28 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.76
[Sat May 19 01:06:36 2012] XMMSAS src. selection expression = ellipse(31882.282554, 34557.374400, 352.320610, 197.381406, 224.338500, X, Y)
[Sat May 19 01:06:36 2012] Writing source region out to fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src18_src.reg
[Sat May 19 01:06:36 2012] Extracting stamp from image fullrun_pn_xmm0602830501_pi300-10000_cl_sm2.00.img.gz, (347, 378) - (387, 418)
[Sat May 19 01:06:36 2012] XMMSAS bgd. selection expression = annulus(31882.282554, 34557.374400, 587.201017, 1174.402034, X, Y)
[Sat May 19 01:06:36 2012] Writing fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src18.gif
[Sat May 19 01:14:33 2012] Mean detx,y = (-2737.31, 11830.94) 
[Sat May 19 01:14:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 01:14:50 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 01:14:50 2012] Setting source spectrum file to fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat May 19 01:14:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat May 19 01:26:34 2012] Not generating rmf since there are only 30 counts
[Sat May 19 01:26:34 2012] rmf not generated due to insufficient counts
[Sat May 19 01:34:59 2012] Updating aperture counts using extracted products
[Sat May 19 01:34:59 2012] Error reading totcts from fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat May 19 01:34:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 01:34:59 2012] Using photon index=1.80, rate=0.00597, arf fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src18.arf
[Sat May 19 01:34:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 01:34:59 2012] Updating source flux to 5.1e-14
[Sat May 19 01:35:07 2012] Flag p found in src. 18 procflags, skipping spectral fitting
[Sat May 19 01:35:07 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 19 01:35:08 2012] xmm0602830501/analysis//spectral/fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete