[Fri May 18 23:40:33 2012] Detection parameters:
  Position = (196.9, 153.5) = 0 25 43.78 47 53 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.3 +/- 9.2
  Background counts = 6.9
  Rate = 0.01 +/- 0.002

[Fri May 18 23:40:33 2012] Off-axis axis estimate = 12.83'
[Fri May 18 23:41:42 2012] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Fri May 18 23:41:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 18 23:41:42 2012] Initial guess for spatial extent in simple fitting = 12.84"
[Fri May 18 23:41:42 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.028
[Fri May 18 23:41:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.84"
[Sat May 19 00:03:49 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 19 00:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src1.csv
[Sat May 19 00:03:49 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 19 00:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src1.csv
[Sat May 19 00:03:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:03:49 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 19 00:03:49 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 19 00:03:49 2012] Fit fullrun_pn_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May 19 00:23:41 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Sat May 19 00:23:41 2012] Source 1 is offset by -9.027664 and -3.416092 pixels which is larger than
2 X fitted extent = 1.380248 x 1.380248, not incorporating fit results
[Sat May 19 00:23:41 2012] Vigneting correction estimate = 1.000000
[Sat May 19 00:23:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 00:23:41 2012] Assessing source extent using major
[Sat May 19 00:23:41 2012] Source does appear to be extended
[Sat May 19 00:23:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 00:23:48 2012] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Sat May 19 00:23:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 00:23:48 2012] Initial guess for spatial extent in simple fitting = 12.84"
[Sat May 19 00:23:48 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.028
[Sat May 19 00:23:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.84"
[Sat May 19 00:45:32 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 19 00:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src1.csv
[Sat May 19 00:45:32 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 19 00:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src1.csv
[Sat May 19 00:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:45:32 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 19 00:45:32 2012] fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 19 00:45:32 2012] Fit fullrun_pn_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 19 01:06:28 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Sat May 19 01:06:28 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 123.443547 pixels away
[Sat May 19 01:06:28 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:06:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:06:28 2012] Assessing source extent using major
[Sat May 19 01:06:28 2012] Source does appear to be extended
[Sat May 19 01:06:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:06:36 2012] XMMSAS src. selection expression = ellipse(17084.441223, 13309.648010, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 19 01:06:36 2012] Writing source region out to fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src1_src.reg
[Sat May 19 01:06:36 2012] Extracting stamp from image fullrun_pn_xmm0602830501_pi300-10000_cl_sm2.00.img.gz, (159, 116) - (234, 191)
[Sat May 19 01:06:36 2012] XMMSAS bgd. selection expression = annulus(17084.441223, 13309.648010, 1087.500000, 2175.000000, X, Y) && !ellipse(16768.112800, 11350.132400, 458.678413, 458.678413, 0.000000, X, Y) && !ellipse(18891.610809, 14514.448532, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 01:06:36 2012] Writing fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src1.gif
[Sat May 19 01:06:41 2012] Mean detx,y = (1546.96, -13672.32) 
[Sat May 19 01:06:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 01:07:10 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 01:07:10 2012] Setting source spectrum file to fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 19 01:07:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 19 01:14:52 2012] Not generating rmf since there are only 48 counts
[Sat May 19 01:14:52 2012] rmf not generated due to insufficient counts
[Sat May 19 01:34:58 2012] Updating aperture counts using extracted products
[Sat May 19 01:34:58 2012] Error reading totcts from fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 19 01:34:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 01:34:59 2012] Using photon index=1.80, rate=0.0096, arf fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src1.arf
[Sat May 19 01:34:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 01:34:59 2012] Updating source flux to 6.1e-14
[Sat May 19 01:35:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 19 01:35:08 2012] xmm0602830501/analysis//spectral/fullrun_pn_xmm0602830501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete