[Fri May 18 23:41:07 2012] Detection parameters:
  Position = (277.7, 285.9) = 0 25 8.88 48 2 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.3 +/- 8.2
  Background counts = 3.4
  Rate = 0.006 +/- 0.001

[Fri May 18 23:41:07 2012] Off-axis axis estimate = 1.76'
[Sat May 19 00:11:47 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sat May 19 00:11:47 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sat May 19 00:11:47 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Sat May 19 00:11:47 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.31"
[Sat May 19 00:23:37 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_src2.ximg exists
[Sat May 19 00:23:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_src2.csv
[Sat May 19 00:23:37 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May 19 00:23:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_src2.csv
[Sat May 19 00:23:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:23:37 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May 19 00:23:37 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 19 00:23:37 2012] Fit fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat May 19 00:23:43 2012] Spatial fit model total counts = 84.590000, observed total counts = 87.000000
[Sat May 19 00:23:43 2012] Offset between fit and detection position for source 6 = 0.727229 pixels
[Sat May 19 00:23:43 2012] 80.003900 total counts/ 38.225900 bgd. counts: snr = 6.757231
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.727229 pixels
  Position = (277.0, 286.2) = 0 25 9.18 48 2 49.8
  Extent = 8.0 (5.7-11.6)", rotation angle = 0
  Source counts = 41.8 +/- 8.9
  Background counts = 38.2
  Rate = 0.006 +/- 0.001
[Sat May 19 00:23:43 2012] Vigneting correction estimate = 1.000000
[Sat May 19 00:23:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 00:23:43 2012] Assessing source extent using major axis lower bound
[Sat May 19 00:23:43 2012] Source does appear to be extended
[Sat May 19 00:23:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 00:55:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 00:55:30 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Sat May 19 00:55:30 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.915
[Sat May 19 00:55:30 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.99"
[Sat May 19 01:06:24 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_src2.ximg exists
[Sat May 19 01:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_src2.csv
[Sat May 19 01:06:24 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat May 19 01:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_src2.csv
[Sat May 19 01:06:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:06:24 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat May 19 01:06:24 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May 19 01:06:24 2012] Fit fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat May 19 01:06:31 2012] Spatial fit model total counts = 78.017700, observed total counts = 79.000000
[Sat May 19 01:06:31 2012] Offset between fit and detection position for source 6 = 0.187383 pixels
[Sat May 19 01:06:31 2012] 74.960200 total counts/ 32.431800 bgd. counts: snr = 7.467814
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.187383 pixels
  Position = (277.1, 286.0) = 0 25 9.16 48 2 49.0
  Extent = 8.2 (5.6-11.3)", rotation angle = 0
  Source counts = 42.5 +/- 8.7
  Background counts = 32.4
  Rate = 0.006 +/- 0.001
[Sat May 19 01:06:31 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:06:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:06:31 2012] Assessing source extent using major axis lower bound
[Sat May 19 01:06:31 2012] Source does appear to be extended
[Sat May 19 01:06:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:32:02 2012] XMMSAS src. selection expression = ellipse(24057.040900, 24836.214600, 492.571814, 492.571814, 0.000000, X, Y)
[Sat May 19 01:32:02 2012] Writing source region out to fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src6_src.reg
[Sat May 19 01:32:02 2012] Extracting stamp from image fullrun_mos2_xmm0602830501_pi300-10000_cl_sm2.00.img.gz, (249, 258) - (305, 314)
[Sat May 19 01:32:02 2012] XMMSAS bgd. selection expression = annulus(24057.040900, 24836.214600, 820.953024, 1641.906047, X, Y) && !ellipse(23164.463623, 24036.431000, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 01:32:02 2012] Writing fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src6.gif
[Sat May 19 01:32:26 2012] Mean detx,y = (-31.35, 176.39) 
[Sat May 19 01:32:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 01:32:35 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 01:32:35 2012] Setting source spectrum file to fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat May 19 01:32:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat May 19 01:34:12 2012] Not generating rmf since there are only 42 counts
[Sat May 19 01:34:12 2012] rmf not generated due to insufficient counts
[Sat May 19 01:34:59 2012] Updating aperture counts using extracted products
[Sat May 19 01:34:59 2012] Error reading totcts from fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat May 19 01:34:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 01:34:59 2012] Using photon index=1.80, rate=0.00642, arf fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src6.arf
[Sat May 19 01:34:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 01:34:59 2012] Updating source flux to 7.6e-14
[Sat May 19 01:35:06 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 19 01:35:07 2012] xmm0602830501/analysis//spectral/fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete