[Fri May 18 23:41:07 2012] Detection parameters:
  Position = (230.5, 357.3) = 0 25 29.40 48 7 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.0 +/- 6.2
  Background counts = 2.5
  Rate = 0.005 +/- 0.001

[Fri May 18 23:41:07 2012] Off-axis axis estimate = 6.52'
[Sat May 19 00:11:47 2012] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Sat May 19 00:11:47 2012] Initial guess for spatial extent in simple fitting = 9.69"
[Sat May 19 00:11:47 2012] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.740
[Sat May 19 00:11:47 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.69"
[Sat May 19 00:23:37 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_src4.ximg exists
[Sat May 19 00:23:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_src4.csv
[Sat May 19 00:23:37 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat May 19 00:23:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_src4.csv
[Sat May 19 00:23:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:23:37 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat May 19 00:23:37 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat May 19 00:23:37 2012] Fit fullrun_mos2_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat May 19 00:23:43 2012] Spatial fit model total counts = 45.553200, observed total counts = 44.000000
[Sat May 19 00:23:43 2012] Offset between fit and detection position for source 4 = 0.142501 pixels
[Sat May 19 00:23:43 2012] 46.495100 total counts/ 31.694700 bgd. counts: snr = 2.628937
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.142501 pixels
  Position = (230.4, 357.3) = 0 25 29.45 48 7 58.6
  Extent = 3.7 (2.4-5.6)", rotation angle = 0
  Source counts = 14.8 +/- 6.8
  Background counts = 31.7
  Rate = 0.002 +/- 0.001
[Sat May 19 00:23:43 2012] Vigneting correction estimate = 1.000000
[Sat May 19 00:23:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 00:23:43 2012] Assessing source extent using major axis lower bound
[Sat May 19 00:23:43 2012] Source does appear to be extended
[Sat May 19 00:23:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 00:55:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 00:55:30 2012] Initial guess for spatial extent in simple fitting = 3.67"
[Sat May 19 00:55:30 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.247
[Sat May 19 00:55:30 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 3.67"
[Sat May 19 01:06:24 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_src4.ximg exists
[Sat May 19 01:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_src4.csv
[Sat May 19 01:06:24 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat May 19 01:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_src4.csv
[Sat May 19 01:06:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:06:24 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat May 19 01:06:24 2012] fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 19 01:06:24 2012] Fit fullrun_mos2_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat May 19 01:06:31 2012] Spatial fit model total counts = 45.584700, observed total counts = 44.000000
[Sat May 19 01:06:31 2012] Offset between fit and detection position for source 4 = 0.012817 pixels
[Sat May 19 01:06:31 2012] 46.524400 total counts/ 31.662600 bgd. counts: snr = 2.641181
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.012817 pixels
  Position = (230.4, 357.3) = 0 25 29.44 48 7 58.6
  Extent = 3.7 (1.6-5.7)", rotation angle = 0
  Source counts = 14.9 +/- 6.8
  Background counts = 31.7
  Rate = 0.002 +/- 0.001
[Sat May 19 01:06:31 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:06:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:06:31 2012] Assessing source extent using major axis lower bound
[Sat May 19 01:06:31 2012] Source does appear to be extended
[Sat May 19 01:06:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:32:02 2012] XMMSAS src. selection expression = ellipse(19998.743800, 31032.793200, 220.659793, 220.659793, 0.000000, X, Y)
[Sat May 19 01:32:02 2012] Writing source region out to fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src4_src.reg
[Sat May 19 01:32:02 2012] Extracting stamp from image fullrun_mos2_xmm0602830501_pi300-10000_cl_sm2.00.img.gz, (218, 345) - (243, 370)
[Sat May 19 01:32:02 2012] XMMSAS bgd. selection expression = annulus(19998.743800, 31032.793200, 367.766321, 735.532643, X, Y)
[Sat May 19 01:32:02 2012] Writing fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src4.gif
[Sat May 19 01:33:05 2012] Mean detx,y = (-6367.44, -3639.31) 
[Sat May 19 01:33:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 01:33:15 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 01:33:15 2012] Setting source spectrum file to fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat May 19 01:33:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat May 19 01:34:27 2012] Not generating rmf since there are only 14 counts
[Sat May 19 01:34:27 2012] rmf not generated due to insufficient counts
[Sat May 19 01:34:59 2012] Updating aperture counts using extracted products
[Sat May 19 01:34:59 2012] Error reading totcts from fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat May 19 01:34:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 01:34:59 2012] Using photon index=1.80, rate=0.00225, arf fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src4.arf
[Sat May 19 01:34:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 01:34:59 2012] Updating source flux to 4.3e-14
[Sat May 19 01:35:06 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 19 01:35:07 2012] xmm0602830501/analysis//spectral/fullrun_mos2_xmm0602830501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete