[Fri May 18 23:40:49 2012] Detection parameters:
  Position = (231.0, 357.0) = 0 25 29.21 48 7 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.4 +/- 6.0
  Background counts = 2.8
  Rate = 0.005 +/- 0.001

[Fri May 18 23:40:49 2012] Off-axis axis estimate = 6.48'
[Sat May 19 00:03:49 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Sat May 19 00:03:49 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Sat May 19 00:03:49 2012] source mask rpix=2.2, npix_max = 29, mask sum = 31, frac = 1.046
[Sat May 19 00:03:49 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.67"
[Sat May 19 00:11:47 2012] fullrun_mos1_xmm0602830501_pi300-10000_cl_pass0_src3.ximg exists
[Sat May 19 00:11:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602830501_pi300-10000_cl_pass0_src3.csv
[Sat May 19 00:11:47 2012] fullrun_mos1_xmm0602830501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May 19 00:11:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602830501_pi300-10000_cl_pass0_src3.csv
[Sat May 19 00:11:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602830501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602830501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:11:47 2012] fullrun_mos1_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May 19 00:11:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May 19 00:11:47 2012] fullrun_mos1_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May 19 00:11:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May 19 00:11:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602830501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:23:42 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.894239 pixels away
[Sat May 19 00:23:42 2012] Vigneting correction estimate = 1.000000
[Sat May 19 00:23:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 00:23:42 2012] Assessing source extent using major
[Sat May 19 00:23:42 2012] Source does appear to be extended
[Sat May 19 00:23:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 00:45:33 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Sat May 19 00:45:33 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Sat May 19 00:45:33 2012] source mask rpix=2.2, npix_max = 29, mask sum = 31, frac = 1.046
[Sat May 19 00:45:33 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.67"
[Sat May 19 00:55:30 2012] fullrun_mos1_xmm0602830501_pi300-10000_cl_pass1_src3.ximg exists
[Sat May 19 00:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602830501_pi300-10000_cl_pass1_src3.csv
[Sat May 19 00:55:30 2012] fullrun_mos1_xmm0602830501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat May 19 00:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602830501_pi300-10000_cl_pass1_src3.csv
[Sat May 19 00:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602830501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602830501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 00:55:30 2012] fullrun_mos1_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat May 19 00:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat May 19 00:55:30 2012] fullrun_mos1_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat May 19 00:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat May 19 00:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602830501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 01:06:29 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.894239 pixels away
[Sat May 19 01:06:29 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 86.418292 pixels away
[Sat May 19 01:06:29 2012] Vigneting correction estimate = 1.000000
[Sat May 19 01:06:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 01:06:29 2012] Assessing source extent using major
[Sat May 19 01:06:29 2012] Source does appear to be extended
[Sat May 19 01:06:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 01:26:42 2012] XMMSAS src. selection expression = ellipse(20044.613037, 31007.351135, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 19 01:26:42 2012] Writing source region out to fullrun_mos1_xmm0602830501_pi300-10000_pass1_cl_src3_src.reg
[Sat May 19 01:26:42 2012] Extracting stamp from image fullrun_mos1_xmm0602830501_pi300-10000_cl_sm2.00.img.gz, (193, 319) - (268, 394)
[Sat May 19 01:26:42 2012] XMMSAS bgd. selection expression = annulus(20044.613037, 31007.351135, 1087.500000, 2175.000000, X, Y)
[Sat May 19 01:26:42 2012] Writing fullrun_mos1_xmm0602830501_pi300-10000_pass1_cl_src3.gif
[Sat May 19 01:27:00 2012] Mean detx,y = (-3468.58, 6117.58) 
[Sat May 19 01:27:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 01:27:24 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 01:27:24 2012] Setting source spectrum file to fullrun_mos1_xmm0602830501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 19 01:27:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602830501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May 19 01:31:38 2012] Not generating rmf since there are only 23 counts
[Sat May 19 01:31:38 2012] rmf not generated due to insufficient counts
[Sat May 19 01:34:59 2012] Updating aperture counts using extracted products
[Sat May 19 01:34:59 2012] Error reading totcts from fullrun_mos1_xmm0602830501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 19 01:34:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 01:34:59 2012] Using photon index=1.80, rate=0.00478, arf fullrun_mos1_xmm0602830501_pi300-10000_pass1_cl_src3.arf
[Sat May 19 01:34:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 01:34:59 2012] Updating source flux to 7.1e-14
[Sat May 19 01:35:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting