[Sun Jan  1 20:11:57 2012] Detection parameters:
  Position = (185.5, 334.3) = 16 26 22.53 -24 47 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.8 +/- 6.3
  Background counts = 4.5
  Rate = 0.003 +/- 0.0009

[Sun Jan  1 20:11:58 2012] Off-axis axis estimate = 8.59'
[Sun Jan  1 20:57:03 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 20:57:03 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Sun Jan  1 20:57:03 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.853
[Sun Jan  1 20:57:03 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.72"
[Sun Jan  1 21:31:59 2012] fullrun_mos2_xmm0602730901_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jan  1 21:31:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602730901_pi300-10000_cl_pass0_src9.csv
[Sun Jan  1 21:31:59 2012] fullrun_mos2_xmm0602730901_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jan  1 21:31:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602730901_pi300-10000_cl_pass0_src9.csv
[Sun Jan  1 21:31:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602730901_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602730901_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 21:31:59 2012] fullrun_mos2_xmm0602730901_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jan  1 21:31:59 2012] fullrun_mos2_xmm0602730901_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jan  1 21:31:59 2012] Fit fullrun_mos2_xmm0602730901_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Jan  1 21:32:10 2012] Spatial fit model total counts = 57.859800, observed total counts = 58.000000
[Sun Jan  1 21:32:10 2012] Offset between fit and detection position for source 10 = 0.104168 pixels
[Sun Jan  1 21:32:10 2012] 55.299000 total counts/ 39.333700 bgd. counts: snr = 2.545626
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.104168 pixels
  Position = (185.4, 334.2) = 16 26 22.57 -24 47 20.9
  Extent = 5.0 (3.0-8.8)", rotation angle = 0
  Source counts = 16.0 +/- 7.4
  Background counts = 39.3
  Rate = 0.002 +/- 0.0007
[Sun Jan  1 21:32:10 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 21:32:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 21:32:10 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 21:32:10 2012] Source does appear to be extended
[Sun Jan  1 21:32:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 22:09:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 22:09:27 2012] Initial guess for spatial extent in simple fitting = 4.97"
[Sun Jan  1 22:09:27 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.834
[Sun Jan  1 22:09:27 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 4.97"
[Sun Jan  1 22:41:16 2012] fullrun_mos2_xmm0602730901_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jan  1 22:41:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0602730901_pi300-10000_cl_pass1_src9.csv
[Sun Jan  1 22:41:16 2012] fullrun_mos2_xmm0602730901_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jan  1 22:41:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0602730901_pi300-10000_cl_pass1_src9.csv
[Sun Jan  1 22:41:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602730901_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602730901_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 22:41:16 2012] fullrun_mos2_xmm0602730901_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jan  1 22:41:16 2012] fullrun_mos2_xmm0602730901_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jan  1 22:41:16 2012] Fit fullrun_mos2_xmm0602730901_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Jan  1 22:41:27 2012] Spatial fit model total counts = 57.898400, observed total counts = 58.000000
[Sun Jan  1 22:41:27 2012] Offset between fit and detection position for source 10 = 0.025471 pixels
[Sun Jan  1 22:41:27 2012] 55.321300 total counts/ 39.724300 bgd. counts: snr = 2.474645
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.025471 pixels
  Position = (185.4, 334.3) = 16 26 22.57 -24 47 20.8
  Extent = 4.8 (3.0-8.9)", rotation angle = 0
  Source counts = 15.6 +/- 7.4
  Background counts = 39.7
  Rate = 0.001 +/- 0.0007
[Sun Jan  1 22:41:27 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 22:41:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 22:41:27 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 22:41:27 2012] Source does appear to be extended
[Sun Jan  1 22:41:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:45:28 2012] XMMSAS src. selection expression = ellipse(16082.815600, 29032.103200, 285.270608, 285.270608, 0.000000, X, Y)
[Sun Jan  1 23:45:28 2012] Writing source region out to fullrun_mos2_xmm0602730901_pi300-10000_pass1_cl_src10_src.reg
[Sun Jan  1 23:45:28 2012] Extracting stamp from image fullrun_mos2_xmm0602730901_pi300-10000_cl_sm2.00.img.gz, (169, 318) - (202, 351)
[Sun Jan  1 23:45:28 2012] XMMSAS bgd. selection expression = annulus(16082.815600, 29032.103200, 475.451014, 950.902027, X, Y)
[Sun Jan  1 23:45:28 2012] Writing fullrun_mos2_xmm0602730901_pi300-10000_pass1_cl_src10.gif
[Sun Jan  1 23:49:28 2012] Mean detx,y = (-8105.18, -6101.50) 
[Sun Jan  1 23:49:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 23:49:43 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 23:49:43 2012] Setting source spectrum file to fullrun_mos2_xmm0602730901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jan  1 23:49:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602730901_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jan  2 00:02:30 2012] Not generating rmf since there are only 15 counts
[Mon Jan  2 00:02:30 2012] rmf not generated due to insufficient counts
[Mon Jan  2 00:03:16 2012] Updating aperture counts using extracted products
[Mon Jan  2 00:03:16 2012] Error reading totcts from fullrun_mos2_xmm0602730901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jan  2 00:03:17 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan  2 00:03:17 2012] Using photon index=1.80, rate=0.00147, arf fullrun_mos2_xmm0602730901_pi300-10000_pass1_cl_src10.arf
[Mon Jan  2 00:03:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jan  2 00:03:17 2012] Updating source flux to 3.1e-14
[Mon Jan  2 00:04:06 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting