[Thu Apr  5 18:10:31 2012] Detection parameters:
  Position = (377.2, 387.0) = 9 40 37.62 34 48 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 563.2 +/- 30.6
  Background counts = 70.8
  Rate = 0.02 +/- 0.001

[Thu Apr  5 18:10:31 2012] Off-axis axis estimate = 8.59'
[Thu Apr  5 18:34:03 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 18:34:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Apr  5 18:34:03 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Thu Apr  5 18:34:03 2012] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.967
[Thu Apr  5 18:34:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.72"
[Thu Apr  5 18:42:10 2012] fullrun_mos1_xmm0602690101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Apr  5 18:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602690101_pi300-10000_cl_pass0_src1.csv
[Thu Apr  5 18:42:10 2012] fullrun_mos1_xmm0602690101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Apr  5 18:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602690101_pi300-10000_cl_pass0_src1.csv
[Thu Apr  5 18:42:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602690101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602690101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 18:42:10 2012] fullrun_mos1_xmm0602690101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Apr  5 18:42:10 2012] fullrun_mos1_xmm0602690101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Apr  5 18:42:10 2012] Fit fullrun_mos1_xmm0602690101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Apr  5 18:54:21 2012] Spatial fit model total counts = 887.967000, observed total counts = 842.000000
[Thu Apr  5 18:54:21 2012] Offset between fit and detection position for source 1 = 0.316388 pixels
[Thu Apr  5 18:54:21 2012] 889.277000 total counts/ 539.022000 bgd. counts: snr = 15.086243
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.316388 pixels
  Position = (376.9, 387.0) = 9 40 37.73 34 48 41.3
  Extent = 5.8 (5.2-6.3)", rotation angle = 0
  Source counts = 350.3 +/- 29.8
  Background counts = 539.0
  Rate = 0.01 +/- 0.001
[Thu Apr  5 18:54:21 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 18:54:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 18:54:21 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 18:54:21 2012] Source does appear to be extended
[Thu Apr  5 18:54:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 19:16:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Apr  5 19:16:26 2012] Initial guess for spatial extent in simple fitting = 5.78"
[Thu Apr  5 19:16:26 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.195
[Thu Apr  5 19:16:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.78"
[Thu Apr  5 19:23:23 2012] fullrun_mos1_xmm0602690101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Apr  5 19:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602690101_pi300-10000_cl_pass1_src1.csv
[Thu Apr  5 19:23:23 2012] fullrun_mos1_xmm0602690101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Apr  5 19:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602690101_pi300-10000_cl_pass1_src1.csv
[Thu Apr  5 19:23:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602690101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602690101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 19:23:23 2012] fullrun_mos1_xmm0602690101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Apr  5 19:23:23 2012] fullrun_mos1_xmm0602690101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Apr  5 19:23:23 2012] Fit fullrun_mos1_xmm0602690101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Apr  5 19:34:18 2012] Spatial fit model total counts = 735.648000, observed total counts = 687.000000
[Thu Apr  5 19:34:18 2012] Offset between fit and detection position for source 1 = 0.017096 pixels
[Thu Apr  5 19:34:18 2012] 736.974000 total counts/ 397.466000 bgd. counts: snr = 17.029426
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.017096 pixels
  Position = (376.9, 387.0) = 9 40 37.72 34 48 41.3
  Extent = 5.6 (5.1-6.2)", rotation angle = 0
  Source counts = 339.5 +/- 27.1
  Background counts = 397.5
  Rate = 0.01 +/- 0.001
[Thu Apr  5 19:34:18 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 19:34:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 19:34:18 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 19:34:18 2012] Source does appear to be extended
[Thu Apr  5 19:34:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 19:57:11 2012] XMMSAS src. selection expression = ellipse(32740.035160, 33617.411200, 338.511010, 338.511010, 0.000000, X, Y)
[Thu Apr  5 19:57:11 2012] Writing source region out to fullrun_mos1_xmm0602690101_pi300-10000_pass1_cl_src1_src.reg
[Thu Apr  5 19:57:11 2012] Extracting stamp from image fullrun_mos1_xmm0602690101_pi300-10000_cl_sm2.00.img.gz, (357, 368) - (396, 406)
[Thu Apr  5 19:57:11 2012] XMMSAS bgd. selection expression = annulus(32740.035160, 33617.411200, 564.185016, 1128.370032, X, Y)
[Thu Apr  5 19:57:11 2012] Writing fullrun_mos1_xmm0602690101_pi300-10000_pass1_cl_src1.gif
[Thu Apr  5 19:57:13 2012] Mean detx,y = (2485.43, 8151.72) 
[Thu Apr  5 19:57:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Apr  5 19:57:19 2012] Binned source spectrum to 10 counts/bin
[Thu Apr  5 19:57:19 2012] Setting source spectrum file to fullrun_mos1_xmm0602690101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Apr  5 19:57:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602690101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Apr  5 20:16:26 2012] Updating aperture counts using extracted products
[Thu Apr  5 20:16:26 2012] Error reading totcts from fullrun_mos1_xmm0602690101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Apr  5 20:16:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Apr  5 20:16:26 2012] Using photon index=1.80, rate=0.0121, arf fullrun_mos1_xmm0602690101_pi300-10000_pass1_cl_src1.arf
[Thu Apr  5 20:16:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Apr  5 20:16:26 2012] Updating source flux to 2e-13
[Thu Apr  5 20:16:36 2012] Reading fit data from xmm0602690101/analysis//spectral/fullrun_mos1_xmm0602690101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Apr  5 20:16:36 2012] Spectral fit parameter nH value = 5.32317e+19
[Thu Apr  5 20:16:36 2012] Spectral fit parameter PhoIndex value = 1.83359
[Thu Apr  5 20:16:36 2012] Failed to get F(0.3-8.0) from xmm0602690101/analysis//spectral/fullrun_mos1_xmm0602690101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Apr  5 20:16:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Apr  5 20:16:36 2012] Using Nh = 5.3e+19, photon index=1.83, rate=0.0121, arf fullrun_mos1_xmm0602690101_pi300-10000_pass1_cl_src1.arf
[Thu Apr  5 20:16:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Apr  5 20:16:36 2012] Updating source flux to 2e-13