[Sun Nov  6 23:08:28 2011] Detection parameters:
  Position = (326.0, 292.1) = 2 56 4.56 -32 10 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.8 +/- 9.2
  Background counts = 7.2
  Rate = 0.004 +/- 0.0008

[Sun Nov  6 23:08:28 2011] Off-axis axis estimate = 2.05'
[Sun Nov  6 23:14:54 2011] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sun Nov  6 23:14:54 2011] Initial guess for spatial extent in simple fitting = 7.45"
[Sun Nov  6 23:14:54 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.816
[Sun Nov  6 23:14:54 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.45"
[Sun Nov  6 23:19:50 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_src5.ximg exists
[Sun Nov  6 23:19:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_src5.csv
[Sun Nov  6 23:19:50 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Nov  6 23:19:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_src5.csv
[Sun Nov  6 23:19:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov  6 23:19:50 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Nov  6 23:19:50 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Nov  6 23:19:50 2011] Fit fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Nov  6 23:31:53 2011] Spatial fit model total counts = 103.070000, observed total counts = 103.000000
[Sun Nov  6 23:31:53 2011] Offset between fit and detection position for source 4 = 0.508134 pixels
[Sun Nov  6 23:31:53 2011] 103.220000 total counts/ 64.051800 bgd. counts: snr = 4.894045
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.508134 pixels
  Position = (325.5, 292.1) = 2 56 4.73 -32 10 51.0
  Extent = 7.0 (5.3-9.2)", rotation angle = 0
  Source counts = 39.2 +/- 10.2
  Background counts = 64.1
  Rate = 0.003 +/- 0.0007
[Sun Nov  6 23:31:53 2011] Vigneting correction estimate = 1.000000
[Sun Nov  6 23:31:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov  6 23:31:53 2011] Assessing source extent using major axis lower bound
[Sun Nov  6 23:31:53 2011] Source does appear to be extended
[Sun Nov  6 23:31:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov  6 23:37:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Nov  6 23:37:23 2011] Initial guess for spatial extent in simple fitting = 7.04"
[Sun Nov  6 23:37:23 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.115
[Sun Nov  6 23:37:23 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 7.04"
[Sun Nov  6 23:42:34 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_src5.ximg exists
[Sun Nov  6 23:42:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_src5.csv
[Sun Nov  6 23:42:34 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Nov  6 23:42:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_src5.csv
[Sun Nov  6 23:42:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov  6 23:42:34 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Nov  6 23:42:34 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Nov  6 23:42:34 2011] Fit fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Nov  6 23:57:07 2011] Warning, spatial fit 5 centroid is now closest to src. 3
[Sun Nov  6 23:57:07 2011] Vigneting correction estimate = 1.000000
[Sun Nov  6 23:57:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov  6 23:57:07 2011] Assessing source extent using major axis lower bound
[Sun Nov  6 23:57:07 2011] Source does appear to be extended
[Sun Nov  6 23:57:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov  7 00:08:59 2011] XMMSAS src. selection expression = ellipse(28268.711200, 25367.382400, 422.316612, 422.316612, 0.000000, X, Y)
[Mon Nov  7 00:08:59 2011] Writing source region out to fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src4_src.reg
[Mon Nov  7 00:08:59 2011] Extracting stamp from image fullrun_mos1_xmm0602560201_pi300-10000_cl_sm2.00.img.gz, (301, 268) - (350, 316)
[Mon Nov  7 00:08:59 2011] XMMSAS bgd. selection expression = annulus(28268.711200, 25367.382400, 703.861020, 1407.722041, X, Y)
[Mon Nov  7 00:08:59 2011] Writing fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src4.gif
[Mon Nov  7 00:09:32 2011] Mean detx,y = (-2129.96, -3680.33) 
[Mon Nov  7 00:09:32 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov  7 00:09:37 2011] Binned source spectrum to 10 counts/bin
[Mon Nov  7 00:09:37 2011] Setting source spectrum file to fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Nov  7 00:09:37 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Nov  7 00:13:18 2011] Not generating rmf since there are only 39 counts
[Mon Nov  7 00:13:18 2011] rmf not generated due to insufficient counts
[Mon Nov  7 00:22:21 2011] Updating aperture counts using extracted products
[Mon Nov  7 00:22:21 2011] Error reading totcts from fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Nov  7 00:22:21 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov  7 00:22:21 2011] Using photon index=1.80, rate=0.00268, arf fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src4.arf
[Mon Nov  7 00:22:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov  7 00:22:21 2011] Updating source flux to 3.6e-14
[Mon Nov  7 00:22:22 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting