[Sun Nov  6 23:08:28 2011] Detection parameters:
  Position = (277.0, 289.5) = 2 56 21.35 -32 11 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1560.0 +/- 51.6
  Background counts = 7.9
  Rate = 0.1 +/- 0.004

[Sun Nov  6 23:08:28 2011] Off-axis axis estimate = 1.68'
[Sun Nov  6 23:14:54 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun Nov  6 23:14:54 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Sun Nov  6 23:14:54 2011] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.742
[Sun Nov  6 23:14:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sun Nov  6 23:19:50 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Nov  6 23:19:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_src1.csv
[Sun Nov  6 23:19:50 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Nov  6 23:19:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_src1.csv
[Sun Nov  6 23:19:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov  6 23:19:50 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Nov  6 23:19:50 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Nov  6 23:19:50 2011] Fit fullrun_mos1_xmm0602560201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Nov  6 23:31:53 2011] Spatial fit model total counts = 1391.140000, observed total counts = 1390.000000
[Sun Nov  6 23:31:53 2011] Offset between fit and detection position for source 2 = 1.094791 pixels
[Sun Nov  6 23:31:53 2011] 1377.802000 total counts/ 421.510000 bgd. counts: snr = 46.578616
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.094791 pixels
  Position = (277.1, 288.4) = 2 56 21.30 -32 11 7.2
  Extent = 5.1 (4.8-5.4)", rotation angle = 0
  Source counts = 956.3 +/- 37.1
  Background counts = 421.5
  Rate = 0.07 +/- 0.003
[Sun Nov  6 23:31:53 2011] Vigneting correction estimate = 1.000000
[Sun Nov  6 23:31:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov  6 23:31:53 2011] Assessing source extent using major axis lower bound
[Sun Nov  6 23:31:53 2011] Source does appear to be extended
[Sun Nov  6 23:31:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov  6 23:37:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Nov  6 23:37:23 2011] Initial guess for spatial extent in simple fitting = 5.14"
[Sun Nov  6 23:37:23 2011] source mask rpix=1.2, npix_max = 11, mask sum = 6, frac = 0.531
[Sun Nov  6 23:37:23 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.14"
[Sun Nov  6 23:42:34 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Nov  6 23:42:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_src1.csv
[Sun Nov  6 23:42:34 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Nov  6 23:42:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_src1.csv
[Sun Nov  6 23:42:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov  6 23:42:34 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Nov  6 23:42:34 2011] fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Nov  6 23:42:34 2011] Fit fullrun_mos1_xmm0602560201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Nov  6 23:57:07 2011] Spatial fit model total counts = 1395.140000, observed total counts = 1391.000000
[Sun Nov  6 23:57:07 2011] Offset between fit and detection position for source 2 = 0.015725 pixels
[Sun Nov  6 23:57:07 2011] 1389.517000 total counts/ 421.476000 bgd. counts: snr = 47.152783
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.015725 pixels
  Position = (277.1, 288.4) = 2 56 21.30 -32 11 7.3
  Extent = 5.2 (4.9-5.5)", rotation angle = 0
  Source counts = 968.0 +/- 37.3
  Background counts = 421.5
  Rate = 0.07 +/- 0.003
[Sun Nov  6 23:57:07 2011] Vigneting correction estimate = 1.000000
[Sun Nov  6 23:57:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov  6 23:57:07 2011] Assessing source extent using major axis lower bound
[Sun Nov  6 23:57:07 2011] Source does appear to be extended
[Sun Nov  6 23:57:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov  7 00:08:59 2011] XMMSAS src. selection expression = ellipse(24062.497360, 25041.760200, 311.291409, 311.291409, 0.000000, X, Y)
[Mon Nov  7 00:08:59 2011] Writing source region out to fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src2_src.reg
[Mon Nov  7 00:08:59 2011] Extracting stamp from image fullrun_mos1_xmm0602560201_pi300-10000_cl_sm2.00.img.gz, (259, 271) - (295, 306)
[Mon Nov  7 00:08:59 2011] XMMSAS bgd. selection expression = annulus(24062.497360, 25041.760200, 518.819015, 1037.638030, X, Y) && !ellipse(24110.944200, 26274.813000, 1143.408033, 240.762407, 72.412000, X, Y)
[Mon Nov  7 00:08:59 2011] Writing fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src2.gif
[Mon Nov  7 00:09:00 2011] Mean detx,y = (290.54, -224.81) 
[Mon Nov  7 00:09:01 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov  7 00:09:05 2011] Binned source spectrum to 10 counts/bin
[Mon Nov  7 00:09:05 2011] Setting source spectrum file to fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Nov  7 00:09:05 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Nov  7 00:22:21 2011] Updating aperture counts using extracted products
[Mon Nov  7 00:22:21 2011] Error reading totcts from fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Nov  7 00:22:21 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov  7 00:22:21 2011] Using photon index=1.80, rate=0.0662, arf fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src2.arf
[Mon Nov  7 00:22:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov  7 00:22:21 2011] Updating source flux to 8e-13
[Mon Nov  7 00:22:32 2011] Reading fit data from xmm0602560201/analysis//spectral/fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src2_pl.csv
[Mon Nov  7 00:22:32 2011] Spectral fit parameter nH value = 7.94111e+22
[Mon Nov  7 00:22:32 2011] Spectral fit parameter PhoIndex value = 1.27109
[Mon Nov  7 00:22:32 2011] Failed to get F(0.3-8.0) from xmm0602560201/analysis//spectral/fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Nov  7 00:22:32 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov  7 00:22:32 2011] Using Nh = 7.9e+22, photon index=1.27, rate=0.0662, arf fullrun_mos1_xmm0602560201_pi300-10000_pass1_cl_src2.arf
[Mon Nov  7 00:22:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov  7 00:22:32 2011] Updating source flux to 2.5e-12