[Fri Aug 17 20:38:59 2012] Detection parameters:
  Position = (200.3, 314.2) = 1 53 12.07 -3 24 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.1 +/- 12.1
  Background counts = 13.5
  Rate = 0.008 +/- 0.001

[Fri Aug 17 20:38:59 2012] Off-axis axis estimate = 7.21'
[Fri Aug 17 21:13:37 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 21:13:37 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Fri Aug 17 21:13:37 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.953
[Fri Aug 17 21:13:37 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.03"
[Fri Aug 17 21:23:41 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_src6.ximg exists
[Fri Aug 17 21:23:41 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Aug 17 21:23:41 2012] Fit fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Aug 17 21:23:41 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Aug 17 21:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Aug 17 21:23:41 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Aug 17 21:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Aug 17 21:23:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 21:23:49 2012] Source 4 is offset by -2.848747 and 6.041038 pixels which is larger than
2 X fitted extent = 1.105108 x 1.105108, not incorporating fit results
[Fri Aug 17 21:23:49 2012] Warning, spatial fit 6 centroid is now closest to src. 3
[Fri Aug 17 21:23:49 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 21:23:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 21:23:49 2012] Assessing source extent using major
[Fri Aug 17 21:23:49 2012] Source does appear to be extended
[Fri Aug 17 21:23:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 21:59:34 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 21:59:34 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Fri Aug 17 21:59:34 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.953
[Fri Aug 17 21:59:34 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.03"
[Fri Aug 17 22:10:30 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_src6.ximg exists
[Fri Aug 17 22:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_src6.csv
[Fri Aug 17 22:10:30 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Aug 17 22:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_src6.csv
[Fri Aug 17 22:10:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 22:10:30 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Aug 17 22:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Aug 17 22:10:30 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Aug 17 22:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Aug 17 22:10:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 22:10:37 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.413990 pixels away
[Fri Aug 17 22:10:37 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 22:10:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 22:10:37 2012] Assessing source extent using major
[Fri Aug 17 22:10:37 2012] Source does appear to be extended
[Fri Aug 17 22:10:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 22:48:58 2012] XMMSAS src. selection expression = ellipse(17378.502975, 27286.914337, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 22:48:58 2012] Writing source region out to fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src4_src.reg
[Fri Aug 17 22:48:58 2012] Extracting stamp from image fullrun_mos2_xmm0602560101_pi300-10000_cl_sm2.00.img.gz, (163, 277) - (238, 352)
[Fri Aug 17 22:48:58 2012] XMMSAS bgd. selection expression = annulus(17378.502975, 27286.914337, 1087.500000, 2175.000000, X, Y) && !ellipse(18418.776400, 27473.783800, 244.942407, 244.942407, 0.000000, X, Y) && !ellipse(16284.897800, 25318.363400, 377.946411, 377.946411, 0.000000, X, Y)
[Fri Aug 17 22:48:58 2012] Writing fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src4.gif
[Fri Aug 17 22:50:05 2012] Mean detx,y = (-7304.93, -57.34) 
[Fri Aug 17 22:50:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 22:50:19 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 22:50:19 2012] Setting source spectrum file to fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Aug 17 22:50:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Aug 17 22:58:37 2012] Not generating rmf since there are only 80 counts
[Fri Aug 17 22:58:37 2012] rmf not generated due to insufficient counts
[Fri Aug 17 22:59:30 2012] Updating aperture counts using extracted products
[Fri Aug 17 22:59:30 2012] Error reading totcts from fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Aug 17 22:59:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 22:59:30 2012] Using photon index=1.80, rate=0.00754, arf fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src4.arf
[Fri Aug 17 22:59:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 22:59:30 2012] Updating source flux to 1e-13
[Fri Aug 17 22:59:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting