[Fri Aug 17 20:38:59 2012] Detection parameters:
  Position = (280.4, 284.7) = 1 52 48.81 -3 26 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1641.4 +/- 48.7
  Background counts = 14.2
  Rate = 0.1 +/- 0.004

[Fri Aug 17 20:38:59 2012] Off-axis axis estimate = 1.65'
[Fri Aug 17 21:13:37 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 21:13:37 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri Aug 17 21:13:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Fri Aug 17 21:13:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Fri Aug 17 21:23:41 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 17 21:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 21:23:41 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 17 21:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 21:23:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 21:23:41 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 17 21:23:41 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 17 21:23:41 2012] Fit fullrun_mos2_xmm0602560101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 17 21:23:49 2012] Spatial fit model total counts = 1625.970000, observed total counts = 1591.000000
[Fri Aug 17 21:23:49 2012] Offset between fit and detection position for source 2 = 0.201015 pixels
[Fri Aug 17 21:23:49 2012] 1622.320000 total counts/ 564.250000 bgd. counts: snr = 44.542913
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.201015 pixels
  Position = (280.4, 284.5) = 1 52 48.81 -3 26 49.3
  Extent = 5.4 (5.0-5.6)", rotation angle = 0
  Source counts = 1058.1 +/- 40.3
  Background counts = 564.2
  Rate = 0.07 +/- 0.003
[Fri Aug 17 21:23:49 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 21:23:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 21:23:49 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 21:23:49 2012] Source does appear to be extended
[Fri Aug 17 21:23:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 21:59:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 21:59:34 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Fri Aug 17 21:59:34 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.751
[Fri Aug 17 21:59:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.35"
[Fri Aug 17 22:10:29 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 17 22:10:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 22:10:29 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 17 22:10:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 22:10:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 22:10:30 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 17 22:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug 17 22:10:30 2012] fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 17 22:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug 17 22:10:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 22:10:37 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Fri Aug 17 22:10:37 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 22:10:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 22:10:37 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 22:10:37 2012] Source does appear to be extended
[Fri Aug 17 22:10:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 22:48:58 2012] Counts = 1058.070000, rescaling region sizes by 2.000000
[Fri Aug 17 22:48:58 2012] XMMSAS src. selection expression = ellipse(24344.581400, 24704.507000, 642.350418, 642.350418, 0.000000, X, Y)
[Fri Aug 17 22:48:58 2012] Writing source region out to fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 17 22:48:58 2012] Extracting stamp from image fullrun_mos2_xmm0602560101_pi300-10000_cl_sm2.00.img.gz, (243, 248) - (317, 321)
[Fri Aug 17 22:48:58 2012] XMMSAS bgd. selection expression = annulus(24344.581400, 24704.507000, 2141.168062, 4282.336123, X, Y) && !ellipse(28981.601200, 25188.187800, 392.214411, 392.214411, 0.000000, X, Y) && !ellipse(25488.544600, 24134.089400, 323.461609, 323.461609, 0.000000, X, Y)
[Fri Aug 17 22:48:58 2012] Writing fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src2.gif
[Fri Aug 17 22:49:00 2012] Mean detx,y = (143.27, 49.98) 
[Fri Aug 17 22:49:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 22:49:15 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 22:49:15 2012] Setting source spectrum file to fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 22:49:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 17 22:59:30 2012] Updating aperture counts using extracted products
[Fri Aug 17 22:59:30 2012] Error reading totcts from fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 22:59:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 22:59:30 2012] Using photon index=1.80, rate=0.0749, arf fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src2.arf
[Fri Aug 17 22:59:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 22:59:30 2012] Updating source flux to 8.1e-13
[Fri Aug 17 23:00:23 2012] Reading fit data from xmm0602560101/analysis//spectral/fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Aug 17 23:00:23 2012] Spectral fit parameter nH value = 1.11458e+23
[Fri Aug 17 23:00:23 2012] Spectral fit parameter PhoIndex value = 1.37469
[Fri Aug 17 23:00:23 2012] Failed to get F(0.3-8.0) from xmm0602560101/analysis//spectral/fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Aug 17 23:00:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 23:00:23 2012] Using Nh = 1.1e+23, photon index=1.37, rate=0.0749, arf fullrun_mos2_xmm0602560101_pi300-10000_pass1_cl_src2.arf
[Fri Aug 17 23:00:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 23:00:23 2012] Updating source flux to 2.8e-12