[Fri Aug 17 20:38:45 2012] Detection parameters:
  Position = (280.3, 284.2) = 1 52 48.83 -3 26 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1582.2 +/- 47.9
  Background counts = 16.8
  Rate = 0.1 +/- 0.003

[Fri Aug 17 20:38:45 2012] Off-axis axis estimate = 1.67'
[Fri Aug 17 20:59:35 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 20:59:35 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Aug 17 20:59:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Fri Aug 17 20:59:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Fri Aug 17 21:13:36 2012] fullrun_mos1_xmm0602560101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 17 21:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602560101_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 21:13:36 2012] fullrun_mos1_xmm0602560101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 17 21:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602560101_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 21:13:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602560101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602560101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 21:13:37 2012] fullrun_mos1_xmm0602560101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 17 21:13:37 2012] fullrun_mos1_xmm0602560101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 17 21:13:37 2012] Fit fullrun_mos1_xmm0602560101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 17 21:23:47 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.195530 pixels away
[Fri Aug 17 21:23:47 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 21:23:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 21:23:47 2012] Assessing source extent using major
[Fri Aug 17 21:23:47 2012] Source does appear to be extended
[Fri Aug 17 21:23:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 21:42:39 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 21:42:39 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Aug 17 21:42:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Fri Aug 17 21:42:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.26"
[Fri Aug 17 21:59:34 2012] fullrun_mos1_xmm0602560101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 17 21:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602560101_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 21:59:34 2012] fullrun_mos1_xmm0602560101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 17 21:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602560101_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 21:59:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602560101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602560101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 21:59:34 2012] fullrun_mos1_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 17 21:59:34 2012] fullrun_mos1_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 17 21:59:34 2012] Fit fullrun_mos1_xmm0602560101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 17 22:10:36 2012] Spatial fit model total counts = 1592.000000, observed total counts = 1592.000000
[Fri Aug 17 22:10:36 2012] Offset between fit and detection position for source 2 = 0.203465 pixels
[Fri Aug 17 22:10:36 2012] 1597.306000 total counts/ 505.236000 bgd. counts: snr = 48.585126
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.203465 pixels
  Position = (280.5, 284.4) = 1 52 48.78 -3 26 49.9
  Extent = 6.1 (5.8-6.5)", rotation angle = 0
  Source counts = 1092.1 +/- 40.0
  Background counts = 505.2
  Rate = 0.08 +/- 0.003
[Fri Aug 17 22:10:36 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 22:10:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 22:10:36 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 22:10:36 2012] Source does appear to be extended
[Fri Aug 17 22:10:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 22:32:09 2012] Counts = 1092.070000, rescaling region sizes by 2.000000
[Fri Aug 17 22:32:09 2012] XMMSAS src. selection expression = ellipse(24351.090800, 24692.489000, 728.355621, 728.355621, 0.000000, X, Y)
[Fri Aug 17 22:32:09 2012] Writing source region out to fullrun_mos1_xmm0602560101_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 17 22:32:09 2012] Extracting stamp from image fullrun_mos1_xmm0602560101_pi300-10000_cl_sm2.00.img.gz, (239, 243) - (322, 326)
[Fri Aug 17 22:32:09 2012] XMMSAS bgd. selection expression = annulus(24351.090800, 24692.489000, 2427.852070, 4855.704140, X, Y) && !ellipse(28959.074000, 25200.379200, 395.784811, 395.784811, 0.000000, X, Y) && !ellipse(25453.806960, 24095.122000, 379.704811, 379.704811, 0.000000, X, Y) && !ellipse(22296.879700, 19068.480896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23004.399600, 26214.887400, 375.148811, 375.148811, 0.000000, X, Y) && !ellipse(24092.515839, 23443.289490, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 22:32:09 2012] Writing fullrun_mos1_xmm0602560101_pi300-10000_pass1_cl_src2.gif
[Fri Aug 17 22:32:10 2012] Mean detx,y = (282.13, -324.88) 
[Fri Aug 17 22:32:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 22:32:23 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 22:32:23 2012] Setting source spectrum file to fullrun_mos1_xmm0602560101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 22:32:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602560101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 17 22:59:30 2012] Updating aperture counts using extracted products
[Fri Aug 17 22:59:30 2012] Error reading totcts from fullrun_mos1_xmm0602560101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 22:59:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 22:59:30 2012] Using photon index=1.80, rate=0.0773, arf fullrun_mos1_xmm0602560101_pi300-10000_pass1_cl_src2.arf
[Fri Aug 17 22:59:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 22:59:30 2012] Updating source flux to 7.2e-13
[Fri Aug 17 22:59:55 2012] Reading fit data from xmm0602560101/analysis//spectral/fullrun_mos1_xmm0602560101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Aug 17 22:59:55 2012] Spectral fit parameter nH value = 7.85738e+14
[Fri Aug 17 22:59:55 2012] Spectral fit parameter PhoIndex value = -0.673065
[Fri Aug 17 22:59:55 2012] Failed to get F(0.3-8.0) from xmm0602560101/analysis//spectral/fullrun_mos1_xmm0602560101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Aug 17 22:59:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 22:59:55 2012] Using Nh = 7.9e+14, photon index=-0.67, rate=0.0773, arf fullrun_mos1_xmm0602560101_pi300-10000_pass1_cl_src2.arf
[Fri Aug 17 22:59:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 22:59:55 2012] Updating source flux to 2.4e-12