[Tue Mar 20 08:25:18 2012] Detection parameters:
  Position = (378.8, 280.9) = 1 27 45.95 -73 32 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4362.3 +/- 81.1
  Background counts = 96.5
  Rate = 0.1 +/- 0.003

[Tue Mar 20 08:25:19 2012] Off-axis axis estimate = 5.97'
[Tue Mar 20 08:30:02 2012] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 08:30:02 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Tue Mar 20 08:30:02 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.268
[Tue Mar 20 08:30:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.41"
[Tue Mar 20 09:18:58 2012] fullrun_pn_xmm0602520501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 20 09:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602520501_pi300-10000_cl_pass0_src1.csv
[Tue Mar 20 09:18:58 2012] fullrun_pn_xmm0602520501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 20 09:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602520501_pi300-10000_cl_pass0_src1.csv
[Tue Mar 20 09:18:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602520501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602520501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 09:18:58 2012] fullrun_pn_xmm0602520501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 20 09:18:58 2012] fullrun_pn_xmm0602520501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 20 09:18:58 2012] Fit fullrun_pn_xmm0602520501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 20 09:24:49 2012] Spatial fit model total counts = 4412.000000, observed total counts = 4412.000000
[Tue Mar 20 09:24:49 2012] Offset between fit and detection position for source 1 = 0.126432 pixels
[Tue Mar 20 09:24:49 2012] 4416.980000 total counts/ 1539.820000 bgd. counts: snr = 73.321111
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.126432 pixels
  Position = (378.7, 280.8) = 1 27 46.06 -73 32 57.9
  Extent = 5.7 (5.5-5.9)", rotation angle = 0
  Source counts = 2877.2 +/- 66.5
  Background counts = 1539.8
  Rate = 0.07 +/- 0.002
[Tue Mar 20 09:24:49 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 09:24:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 09:24:49 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 09:24:49 2012] Source does appear to be extended
[Tue Mar 20 09:24:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 09:24:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 09:24:58 2012] Initial guess for spatial extent in simple fitting = 5.71"
[Tue Mar 20 09:24:58 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.218
[Tue Mar 20 09:24:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.71"
[Tue Mar 20 10:27:11 2012] fullrun_pn_xmm0602520501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 20 10:27:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602520501_pi300-10000_cl_pass1_src1.csv
[Tue Mar 20 10:27:11 2012] fullrun_pn_xmm0602520501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 20 10:27:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602520501_pi300-10000_cl_pass1_src1.csv
[Tue Mar 20 10:27:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602520501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602520501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 10:27:11 2012] fullrun_pn_xmm0602520501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 20 10:27:11 2012] fullrun_pn_xmm0602520501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 20 10:27:12 2012] Fit fullrun_pn_xmm0602520501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 20 10:35:31 2012] Spatial fit model total counts = 4285.020000, observed total counts = 4289.000000
[Tue Mar 20 10:35:31 2012] Offset between fit and detection position for source 1 = 0.009104 pixels
[Tue Mar 20 10:35:31 2012] 4293.300000 total counts/ 1455.550000 bgd. counts: snr = 74.380753
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.009104 pixels
  Position = (378.7, 280.8) = 1 27 46.07 -73 32 57.9
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 2837.8 +/- 65.5
  Background counts = 1455.5
  Rate = 0.07 +/- 0.002
[Tue Mar 20 10:35:31 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 10:35:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 10:35:31 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 10:35:31 2012] Source does appear to be extended
[Tue Mar 20 10:35:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 10:35:44 2012] Counts = 2837.750000, rescaling region sizes by 2.000000
[Tue Mar 20 10:35:44 2012] XMMSAS src. selection expression = ellipse(32901.381800, 24380.254400, 675.934819, 675.934819, 0.000000, X, Y)
[Tue Mar 20 10:35:44 2012] Writing source region out to fullrun_pn_xmm0602520501_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 20 10:35:44 2012] Extracting stamp from image fullrun_pn_xmm0602520501_pi300-10000_cl_sm2.00.img.gz, (340, 242) - (418, 320)
[Tue Mar 20 10:35:44 2012] XMMSAS bgd. selection expression = annulus(32901.381800, 24380.254400, 2253.116065, 4506.232130, X, Y) && !ellipse(29691.424540, 27677.469600, 414.952812, 414.952812, 0.000000, X, Y) && !ellipse(30739.791040, 25180.538954, 866.752025, 866.752025, 0.000000, X, Y) && !ellipse(29530.703491, 24231.973907, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 20 10:35:44 2012] Writing fullrun_pn_xmm0602520501_pi300-10000_pass1_cl_src1.gif
[Tue Mar 20 10:36:18 2012] Mean detx,y = (-362.79, 8591.57) 
[Tue Mar 20 10:36:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 10:38:22 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 10:38:22 2012] Setting source spectrum file to fullrun_pn_xmm0602520501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 20 10:38:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602520501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 20 12:00:53 2012] Updating aperture counts using extracted products
[Tue Mar 20 12:00:53 2012] Error reading totcts from fullrun_pn_xmm0602520501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 20 12:00:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 12:00:55 2012] Using photon index=1.80, rate=0.0685, arf fullrun_pn_xmm0602520501_pi300-10000_pass1_cl_src1.arf
[Tue Mar 20 12:00:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 12:00:55 2012] Updating source flux to 2.8e-13
[Tue Mar 20 12:03:11 2012] Reading fit data from xmm0602520501/analysis//spectral/fullrun_pn_xmm0602520501_pi300-10000_pass1_cl_src1_pl.csv
[Tue Mar 20 12:03:11 2012] Spectral fit parameter nH value = 1.39256e+21
[Tue Mar 20 12:03:11 2012] Spectral fit parameter PhoIndex value = 0.84654
[Tue Mar 20 12:03:11 2012] Failed to get F(0.3-8.0) from xmm0602520501/analysis//spectral/fullrun_pn_xmm0602520501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 20 12:03:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 12:03:11 2012] Using Nh = 1.4e+21, photon index=0.85, rate=0.0685, arf fullrun_pn_xmm0602520501_pi300-10000_pass1_cl_src1.arf
[Tue Mar 20 12:03:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 12:03:11 2012] Updating source flux to 6.5e-13