[Sun Dec 25 03:15:08 2011] Detection parameters:
  Position = (148.9, 369.2) = 1 31 41.23 -73 26 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.2 +/- 11.5
  Background counts = 22.3
  Rate = 0.0008 +/- 0.0002

[Sun Dec 25 03:15:09 2011] Off-axis axis estimate = 11.99'
[Sun Dec 25 07:00:08 2011] Using EEF radius (= 12.43 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 07:00:08 2011] Initial guess for spatial extent in simple fitting = 12.43"
[Sun Dec 25 07:00:08 2011] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.932
[Sun Dec 25 07:00:08 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 12.43"
[Sun Dec 25 08:20:38 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src26.ximg exists
[Sun Dec 25 08:20:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src26.csv
[Sun Dec 25 08:20:38 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Dec 25 08:20:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src26.csv
[Sun Dec 25 08:20:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 08:20:38 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Dec 25 08:20:38 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Dec 25 08:20:38 2011] Fit fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Dec 25 08:21:13 2011] Warning, spatial fit 26 centroid is now closest to src. 4
[Sun Dec 25 08:21:13 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 08:21:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 08:21:13 2011] Assessing source extent using major
[Sun Dec 25 08:21:13 2011] Source does appear to be extended
[Sun Dec 25 08:21:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 11:55:33 2011] Using EEF radius (= 12.43 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 11:55:33 2011] Initial guess for spatial extent in simple fitting = 12.43"
[Sun Dec 25 11:55:33 2011] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.932
[Sun Dec 25 11:55:33 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 12.43"
[Sun Dec 25 13:27:06 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src25.ximg exists
[Sun Dec 25 13:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src25.csv
[Sun Dec 25 13:27:06 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Dec 25 13:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src25.csv
[Sun Dec 25 13:27:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 13:27:06 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Dec 25 13:27:06 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Dec 25 13:27:06 2011] Fit fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Dec 25 13:27:43 2011] Source 17 is offset by -7.853159 and 1.705511 pixels which is larger than
2 X fitted extent = 3.098653 x 3.098653, not incorporating fit results
[Sun Dec 25 13:27:43 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 13:27:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 13:27:43 2011] Assessing source extent using major
[Sun Dec 25 13:27:43 2011] Source does appear to be extended
[Sun Dec 25 13:27:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 13:27:43 2011] Source is confused with source 4
[Sun Dec 25 17:21:25 2011] XMMSAS src. selection expression = ellipse(12906.941132, 32072.787842, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 25 17:21:25 2011] Writing source region out to fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src17_src.reg
[Sun Dec 25 17:21:25 2011] Extracting stamp from image fullrun_mos2_xmm0602520401_pi300-10000_cl_sm2.00.img.gz, (111, 332) - (186, 407)
[Sun Dec 25 17:21:25 2011] XMMSAS bgd. selection expression = annulus(12906.941132, 32072.787842, 1087.500000, 2175.000000, X, Y) && !ellipse(13485.854800, 31909.723200, 579.938417, 579.938417, 0.000000, X, Y)
[Sun Dec 25 17:21:25 2011] Writing fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src17.gif
[Sun Dec 25 17:42:50 2011] Mean detx,y = (-542.05, 12493.81) 
[Sun Dec 25 17:42:54 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 17:44:03 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 17:44:04 2011] Setting source spectrum file to fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Dec 25 17:44:04 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Dec 25 18:30:33 2011] Not generating rmf since there are only 53 counts
[Sun Dec 25 18:30:33 2011] rmf not generated due to insufficient counts
[Sun Dec 25 18:34:09 2011] Updating aperture counts using extracted products
[Sun Dec 25 18:34:10 2011] Error reading totcts from fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Dec 25 18:34:12 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 18:34:12 2011] Using photon index=1.80, rate=0.000805, arf fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src17.arf
[Sun Dec 25 18:34:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 18:34:12 2011] Updating source flux to 1.9e-14
[Sun Dec 25 18:35:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting