[Sun Dec 25 03:15:08 2011] Detection parameters:
  Position = (194.0, 212.0) = 1 30 56.56 -73 37 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.0 +/- 12.5
  Background counts = 19.4
  Rate = 0.001 +/- 0.0002

[Sun Dec 25 03:15:09 2011] Off-axis axis estimate = 9.83'
[Sun Dec 25 07:00:08 2011] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 07:00:08 2011] Initial guess for spatial extent in simple fitting = 11.34"
[Sun Dec 25 07:00:08 2011] source mask rpix=2.6, npix_max = 38, mask sum = 32, frac = 0.828
[Sun Dec 25 07:00:08 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 11.34"
[Sun Dec 25 08:20:38 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src22.ximg exists
[Sun Dec 25 08:20:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src22.csv
[Sun Dec 25 08:20:38 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Dec 25 08:20:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src22.csv
[Sun Dec 25 08:20:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 08:20:38 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Dec 25 08:20:38 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Dec 25 08:20:38 2011] Fit fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Sun Dec 25 08:21:13 2011] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.650453 pixels away
[Sun Dec 25 08:21:13 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 08:21:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 08:21:13 2011] Assessing source extent using major
[Sun Dec 25 08:21:13 2011] Source does appear to be extended
[Sun Dec 25 08:21:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 11:55:33 2011] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 11:55:33 2011] Initial guess for spatial extent in simple fitting = 11.34"
[Sun Dec 25 11:55:33 2011] source mask rpix=2.6, npix_max = 38, mask sum = 32, frac = 0.828
[Sun Dec 25 11:55:33 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 11.34"
[Sun Dec 25 13:27:06 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src21.ximg exists
[Sun Dec 25 13:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src21.csv
[Sun Dec 25 13:27:06 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Dec 25 13:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src21.csv
[Sun Dec 25 13:27:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 13:27:06 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Dec 25 13:27:06 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Dec 25 13:27:06 2011] Fit fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Dec 25 13:27:43 2011] Spatial fit model total counts = 293.099000, observed total counts = 292.000000
[Sun Dec 25 13:27:43 2011] Offset between fit and detection position for source 16 = 0.511586 pixels
[Sun Dec 25 13:27:43 2011] 294.423300 total counts/ 256.953000 bgd. counts: snr = 2.337547
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.511586 pixels
  Position = (194.4, 212.3) = 1 30 56.12 -73 37 55.8
  Extent = 2.8" x 2.8", rotation angle = 0
  Source counts = 37.5 +/- 17.2
  Background counts = 257.0
  Rate = 0.0006 +/- 0.0003
[Sun Dec 25 13:27:43 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 13:27:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 13:27:43 2011] Assessing source extent using major
[Sun Dec 25 13:27:43 2011] Source does appear to be extended
[Sun Dec 25 13:27:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 17:21:25 2011] XMMSAS src. selection expression = ellipse(16865.444200, 18420.233600, 170.147405, 170.147405, 0.000000, X, Y)
[Sun Dec 25 17:21:25 2011] Writing source region out to fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src16_src.reg
[Sun Dec 25 17:21:25 2011] Extracting stamp from image fullrun_mos2_xmm0602520401_pi300-10000_cl_sm2.00.img.gz, (185, 203) - (204, 222)
[Sun Dec 25 17:21:25 2011] XMMSAS bgd. selection expression = annulus(16865.444200, 18420.233600, 283.579008, 567.158016, X, Y)
[Sun Dec 25 17:21:25 2011] Writing fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src16.gif
[Sun Dec 25 17:39:54 2011] Mean detx,y = (11161.22, 4564.24) 
[Sun Dec 25 17:39:57 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 17:40:15 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 17:40:16 2011] Setting source spectrum file to fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Dec 25 17:40:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Dec 25 18:30:14 2011] Not generating rmf since there are only 37 counts
[Sun Dec 25 18:30:14 2011] rmf not generated due to insufficient counts
[Sun Dec 25 18:34:09 2011] Updating aperture counts using extracted products
[Sun Dec 25 18:34:09 2011] Error reading totcts from fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Dec 25 18:34:11 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 18:34:11 2011] Using photon index=1.80, rate=0.000568, arf fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src16.arf
[Sun Dec 25 18:34:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 18:34:11 2011] Updating source flux to 2.7e-14
[Sun Dec 25 18:35:44 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting