[Sun Dec 25 03:15:07 2011] Detection parameters:
  Position = (379.7, 281.0) = 1 27 45.84 -73 32 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3007.7 +/- 64.5
  Background counts = 26.2
  Rate = 0.07 +/- 0.001

[Sun Dec 25 03:15:09 2011] Off-axis axis estimate = 6.03'
[Sun Dec 25 07:00:08 2011] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 07:00:08 2011] Initial guess for spatial extent in simple fitting = 9.44"
[Sun Dec 25 07:00:08 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.052
[Sun Dec 25 07:00:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.44"
[Sun Dec 25 08:20:38 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 25 08:20:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src1.csv
[Sun Dec 25 08:20:38 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 25 08:20:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src1.csv
[Sun Dec 25 08:20:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 08:20:38 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 25 08:20:38 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 25 08:20:38 2011] Fit fullrun_mos2_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 25 08:21:13 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.779437 pixels away
[Sun Dec 25 08:21:13 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 08:21:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 08:21:13 2011] Assessing source extent using major
[Sun Dec 25 08:21:13 2011] Source does appear to be extended
[Sun Dec 25 08:21:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 11:55:33 2011] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 11:55:33 2011] Initial guess for spatial extent in simple fitting = 9.44"
[Sun Dec 25 11:55:33 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.052
[Sun Dec 25 11:55:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.44"
[Sun Dec 25 13:27:06 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 25 13:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 13:27:06 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 25 13:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 13:27:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 13:27:06 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 25 13:27:06 2011] fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 25 13:27:06 2011] Fit fullrun_mos2_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 25 13:27:43 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.779437 pixels away
[Sun Dec 25 13:27:43 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 13:27:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 13:27:43 2011] Assessing source extent using major
[Sun Dec 25 13:27:43 2011] Source does appear to be extended
[Sun Dec 25 13:27:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 17:21:25 2011] Counts = 3007.710449, rescaling region sizes by 2.000000
[Sun Dec 25 17:21:25 2011] XMMSAS src. selection expression = ellipse(32985.876312, 24398.287598, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Dec 25 17:21:25 2011] Writing source region out to fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 25 17:21:25 2011] Extracting stamp from image fullrun_mos2_xmm0602520401_pi300-10000_cl_sm2.00.img.gz, (305, 206) - (455, 356)
[Sun Dec 25 17:21:25 2011] XMMSAS bgd. selection expression = annulus(32985.876312, 24398.287598, 4350.000000, 8700.000000, X, Y) && !ellipse(24102.769211, 24148.937865, 426.843518, 369.673223, 359.304345, X, Y) && !ellipse(29732.612000, 27697.409000, 304.275209, 304.275209, 0.000000, X, Y) && !ellipse(29591.461182, 24221.390961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27158.266800, 23566.324400, 499.368814, 499.368814, 0.000000, X, Y) && !ellipse(29663.601800, 25311.403200, 342.141610, 342.141610, 0.000000, X, Y) && !ellipse(24828.462400, 30742.527600, 791.336023, 791.336023, 0.000000, X, Y) && !ellipse(38256.340454, 17831.137680, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 25 17:21:25 2011] Writing fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src1.gif
[Sun Dec 25 17:21:39 2011] Mean detx,y = (429.21, -8814.06) 
[Sun Dec 25 17:21:43 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 17:25:44 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 17:25:45 2011] Setting source spectrum file to fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 17:25:45 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Dec 25 17:46:34 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec 25 17:46:34 2011] rmf not generated due to insufficient counts
[Sun Dec 25 18:34:08 2011] Updating aperture counts using extracted products
[Sun Dec 25 18:34:08 2011] Error reading totcts from fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 18:34:10 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 18:34:10 2011] Using photon index=1.80, rate=0.0682, arf fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src1.arf
[Sun Dec 25 18:34:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 18:34:10 2011] Updating source flux to 9.2e-13
[Sun Dec 25 18:35:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Dec 25 18:37:02 2011] xmm0602520401/analysis//spectral/fullrun_mos2_xmm0602520401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete