[Sun Dec 25 03:14:18 2011] Detection parameters:
  Position = (296.2, 238.6) = 1 29 11.38 -73 36 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.0 +/- 10.0
  Background counts = 26.1
  Rate = 0.002 +/- 0.0003

[Sun Dec 25 03:14:18 2011] Off-axis axis estimate = 4.34'
[Sun Dec 25 05:54:23 2011] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 05:54:23 2011] Initial guess for spatial extent in simple fitting = 8.60"
[Sun Dec 25 05:54:23 2011] source mask rpix=2.0, npix_max = 24, mask sum = 15, frac = 0.611
[Sun Dec 25 05:54:23 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 8.60"
[Sun Dec 25 07:00:08 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src14.ximg exists
[Sun Dec 25 07:00:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src14.csv
[Sun Dec 25 07:00:08 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Dec 25 07:00:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src14.csv
[Sun Dec 25 07:00:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 07:00:08 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Dec 25 07:00:08 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Dec 25 07:00:08 2011] Fit fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sun Dec 25 08:21:03 2011] Source 24 is offset by 5.720136 and -6.987764 pixels which is larger than
2 X fitted extent = 1.082092 x 1.082092, not incorporating fit results
[Sun Dec 25 08:21:03 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 08:21:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 08:21:03 2011] Assessing source extent using major
[Sun Dec 25 08:21:03 2011] Source does appear to be extended
[Sun Dec 25 08:21:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 10:52:00 2011] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 10:52:00 2011] Initial guess for spatial extent in simple fitting = 8.60"
[Sun Dec 25 10:52:00 2011] source mask rpix=2.0, npix_max = 24, mask sum = 15, frac = 0.611
[Sun Dec 25 10:52:00 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 8.60"
[Sun Dec 25 11:55:32 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src14.ximg exists
[Sun Dec 25 11:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src14.csv
[Sun Dec 25 11:55:32 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Dec 25 11:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src14.csv
[Sun Dec 25 11:55:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 11:55:33 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Dec 25 11:55:33 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Dec 25 11:55:33 2011] Fit fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sun Dec 25 13:27:32 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 60.830740 pixels away
[Sun Dec 25 13:27:32 2011] Source 24 is offset by 5.700987 and -6.947764 pixels which is larger than
2 X fitted extent = 1.081558 x 1.081558, not incorporating fit results
[Sun Dec 25 13:27:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 13:27:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 13:27:32 2011] Assessing source extent using major
[Sun Dec 25 13:27:32 2011] Source does appear to be extended
[Sun Dec 25 13:27:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:17:57 2011] XMMSAS src. selection expression = ellipse(25719.201843, 20707.106567, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 25 16:17:57 2011] Writing source region out to fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src24_src.reg
[Sun Dec 25 16:17:57 2011] Extracting stamp from image fullrun_mos1_xmm0602520401_pi300-10000_cl_sm2.00.img.gz, (259, 201) - (334, 276)
[Sun Dec 25 16:17:57 2011] XMMSAS bgd. selection expression = annulus(25719.201843, 20707.106567, 1087.500000, 2175.000000, X, Y)
[Sun Dec 25 16:17:57 2011] Writing fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src24.gif
[Sun Dec 25 16:27:05 2011] Mean detx,y = (-2876.25, -6284.52) 
[Sun Dec 25 16:27:08 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 16:27:56 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 16:27:57 2011] Setting source spectrum file to fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Dec 25 16:27:57 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun Dec 25 17:19:34 2011] Not generating rmf since there are only 53 counts
[Sun Dec 25 17:19:34 2011] rmf not generated due to insufficient counts
[Sun Dec 25 18:34:04 2011] Updating aperture counts using extracted products
[Sun Dec 25 18:34:04 2011] Error reading totcts from fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Dec 25 18:34:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 18:34:06 2011] Using photon index=1.80, rate=0.0015, arf fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src24.arf
[Sun Dec 25 18:34:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 18:34:06 2011] Updating source flux to 2.7e-14
[Sun Dec 25 18:34:14 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting