[Sun Dec 25 03:14:17 2011] Detection parameters:
  Position = (401.6, 439.8) = 1 27 24.65 -73 21 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.1 +/- 14.1
  Background counts = 24.2
  Rate = 0.001 +/- 0.0002

[Sun Dec 25 03:14:18 2011] Off-axis axis estimate = 12.69'
[Sun Dec 25 05:54:23 2011] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 05:54:23 2011] Initial guess for spatial extent in simple fitting = 12.77"
[Sun Dec 25 05:54:23 2011] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.038
[Sun Dec 25 05:54:23 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 12.77"
[Sun Dec 25 07:00:08 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src15.ximg exists
[Sun Dec 25 07:00:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src15.csv
[Sun Dec 25 07:00:08 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Dec 25 07:00:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src15.csv
[Sun Dec 25 07:00:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 07:00:08 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Dec 25 07:00:08 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Dec 25 07:00:08 2011] Fit fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Dec 25 08:21:03 2011] Source 10 is offset by 4.557975 and -0.038963 pixels which is larger than
2 X fitted extent = 1.457802 x 1.457802, not incorporating fit results
[Sun Dec 25 08:21:03 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.435585 pixels away
[Sun Dec 25 08:21:03 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 08:21:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 08:21:03 2011] Assessing source extent using major
[Sun Dec 25 08:21:03 2011] Source does appear to be extended
[Sun Dec 25 08:21:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 10:52:00 2011] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 10:52:00 2011] Initial guess for spatial extent in simple fitting = 12.77"
[Sun Dec 25 10:52:00 2011] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.038
[Sun Dec 25 10:52:00 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 12.77"
[Sun Dec 25 11:55:32 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src15.ximg exists
[Sun Dec 25 11:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src15.csv
[Sun Dec 25 11:55:32 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Dec 25 11:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src15.csv
[Sun Dec 25 11:55:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 11:55:33 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Dec 25 11:55:33 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Dec 25 11:55:33 2011] Fit fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Dec 25 13:27:32 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.432101 pixels away
[Sun Dec 25 13:27:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 13:27:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 13:27:32 2011] Assessing source extent using major
[Sun Dec 25 13:27:32 2011] Source does appear to be extended
[Sun Dec 25 13:27:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:17:57 2011] XMMSAS src. selection expression = ellipse(34887.065796, 38213.504211, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 25 16:17:57 2011] Writing source region out to fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src10_src.reg
[Sun Dec 25 16:17:57 2011] Extracting stamp from image fullrun_mos1_xmm0602520401_pi300-10000_cl_sm2.00.img.gz, (364, 402) - (439, 477)
[Sun Dec 25 16:17:57 2011] XMMSAS bgd. selection expression = annulus(34887.065796, 38213.504211, 1087.500000, 2175.000000, X, Y) && !ellipse(33520.455841, 38856.716919, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 25 16:17:57 2011] Writing fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src10.gif
[Sun Dec 25 16:28:07 2011] Mean detx,y = (-6098.05, 13108.64) 
[Sun Dec 25 16:28:10 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 16:28:37 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 16:28:37 2011] Setting source spectrum file to fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Dec 25 16:28:37 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Dec 25 17:20:00 2011] Not generating rmf since there are only 90 counts
[Sun Dec 25 17:20:00 2011] rmf not generated due to insufficient counts
[Sun Dec 25 18:34:04 2011] Updating aperture counts using extracted products
[Sun Dec 25 18:34:04 2011] Error reading totcts from fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Dec 25 18:34:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 18:34:06 2011] Using photon index=1.80, rate=0.00136, arf fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src10.arf
[Sun Dec 25 18:34:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 18:34:06 2011] Updating source flux to 2.9e-14
[Sun Dec 25 18:34:14 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting