[Sun Dec 25 03:14:16 2011] Detection parameters:
  Position = (277.6, 278.0) = 1 29 30.45 -73 33 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 520.0 +/- 28.6
  Background counts = 28.6
  Rate = 0.009 +/- 0.0005

[Sun Dec 25 03:14:18 2011] Off-axis axis estimate = 2.12'
[Sun Dec 25 05:54:23 2011] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 05:54:23 2011] Initial guess for spatial extent in simple fitting = 7.49"
[Sun Dec 25 05:54:23 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.013
[Sun Dec 25 05:54:23 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.49"
[Sun Dec 25 07:00:07 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 25 07:00:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src1.csv
[Sun Dec 25 07:00:07 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 25 07:00:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src1.csv
[Sun Dec 25 07:00:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 07:00:08 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 25 07:00:08 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 25 07:00:08 2011] Fit fullrun_mos1_xmm0602520401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 25 08:21:03 2011] Spatial fit model total counts = 717.000000, observed total counts = 717.000000
[Sun Dec 25 08:21:03 2011] Offset between fit and detection position for source 1 = 0.014399 pixels
[Sun Dec 25 08:21:03 2011] 720.494000 total counts/ 366.338000 bgd. counts: snr = 18.503489
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014399 pixels
  Position = (277.6, 277.9) = 1 29 30.45 -73 33 11.8
  Extent = 5.1 (4.6-5.6)", rotation angle = 0
  Source counts = 354.2 +/- 26.8
  Background counts = 366.3
  Rate = 0.005 +/- 0.0004
[Sun Dec 25 08:21:03 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 08:21:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 08:21:03 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 08:21:03 2011] Source does appear to be extended
[Sun Dec 25 08:21:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 10:52:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 10:52:00 2011] Initial guess for spatial extent in simple fitting = 5.10"
[Sun Dec 25 10:52:00 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.071
[Sun Dec 25 10:52:00 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.10"
[Sun Dec 25 11:55:32 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 25 11:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 11:55:32 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 25 11:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 11:55:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 11:55:32 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 25 11:55:32 2011] fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 25 11:55:32 2011] Fit fullrun_mos1_xmm0602520401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 25 13:27:32 2011] Spatial fit model total counts = 714.805000, observed total counts = 717.000000
[Sun Dec 25 13:27:32 2011] Offset between fit and detection position for source 1 = 0.001718 pixels
[Sun Dec 25 13:27:32 2011] 718.237000 total counts/ 365.534000 bgd. counts: snr = 18.447829
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001718 pixels
  Position = (277.6, 277.9) = 1 29 30.45 -73 33 11.8
  Extent = 5.1 (4.6-5.6)", rotation angle = 0
  Source counts = 352.7 +/- 26.8
  Background counts = 365.5
  Rate = 0.005 +/- 0.0004
[Sun Dec 25 13:27:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 13:27:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 13:27:32 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 13:27:32 2011] Source does appear to be extended
[Sun Dec 25 13:27:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:17:57 2011] XMMSAS src. selection expression = ellipse(24099.224600, 24132.806400, 307.164195, 307.164195, 0.000000, X, Y)
[Sun Dec 25 16:17:57 2011] Writing source region out to fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 25 16:17:57 2011] Extracting stamp from image fullrun_mos1_xmm0602520401_pi300-10000_cl_sm2.00.img.gz, (260, 260) - (295, 296)
[Sun Dec 25 16:17:57 2011] XMMSAS bgd. selection expression = annulus(24099.224600, 24132.806400, 511.940325, 1023.880651, X, Y)
[Sun Dec 25 16:17:57 2011] Writing fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src1.gif
[Sun Dec 25 16:18:07 2011] Mean detx,y = (-239.20, -3627.06) 
[Sun Dec 25 16:18:11 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 16:18:31 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 16:18:31 2011] Setting source spectrum file to fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 16:18:31 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Dec 25 18:34:03 2011] Updating aperture counts using extracted products
[Sun Dec 25 18:34:03 2011] Error reading totcts from fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 18:34:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 18:34:05 2011] Using photon index=1.80, rate=0.00535, arf fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src1.arf
[Sun Dec 25 18:34:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 18:34:05 2011] Updating source flux to 7.2e-14
[Sun Dec 25 18:35:44 2011] Reading fit data from xmm0602520401/analysis//spectral/fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Dec 25 18:35:44 2011] Spectral fit parameter nH value = 2.17031e+21
[Sun Dec 25 18:35:44 2011] Spectral fit parameter PhoIndex value = 2.16255
[Sun Dec 25 18:35:44 2011] Failed to get F(0.3-8.0) from xmm0602520401/analysis//spectral/fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Dec 25 18:35:44 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 18:35:44 2011] Using Nh = 2.2e+21, photon index=2.16, rate=0.00535, arf fullrun_mos1_xmm0602520401_pi300-10000_pass1_cl_src1.arf
[Sun Dec 25 18:35:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 18:35:44 2011] Updating source flux to 7.2e-14