[Mon Dec 19 06:07:52 2011] Detection parameters: Position = (341.4, 291.6) = 1 28 24.96 -73 32 11.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 136.9 +/- 25.1 Background counts = 267.4 Rate = 0.002 +/- 0.0004 [Mon Dec 19 06:07:52 2011] Off-axis axis estimate = 3.15' [Mon Dec 19 06:14:04 2011] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting [Mon Dec 19 06:14:04 2011] Initial guess for spatial extent in simple fitting = 8.00" [Mon Dec 19 06:14:04 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.141 [Mon Dec 19 06:14:04 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 8.00" [Mon Dec 19 06:56:45 2011] fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_src17.ximg exists [Mon Dec 19 06:56:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_src17.csv [Mon Dec 19 06:56:45 2011] fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_src17_1.ximg exists [Mon Dec 19 06:56:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_src17.csv [Mon Dec 19 06:56:45 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Dec 19 06:56:45 2011] fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Mon Dec 19 06:56:45 2011] fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Mon Dec 19 06:56:45 2011] Fit fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly [Mon Dec 19 07:47:54 2011] Spatial fit model total counts = 817.000000, observed total counts = 817.000000 [Mon Dec 19 07:47:54 2011] Offset between fit and detection position for source 17 = 0.129836 pixels [Mon Dec 19 07:47:54 2011] 809.449700 total counts/ 762.874000 bgd. counts: snr = 1.686293 Spatial fit parameters: Offset between fit and detection position for source 17 = 0.129836 pixels Position = (341.3, 291.7) = 1 28 24.99 -73 32 10.7 Extent = 3.6 (2.1-5.3)", rotation angle = 0 Source counts = 46.6 +/- 28.5 Background counts = 762.9 Rate = 0.0009 +/- 0.0005 Deleting source due to low Poisson probability