[Mon Dec 19 06:07:51 2011] Detection parameters:
  Position = (379.3, 280.9) = 1 27 46.09 -73 32 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9044.6 +/- 116.9
  Background counts = 252.5
  Rate = 0.2 +/- 0.002

[Mon Dec 19 06:07:52 2011] Off-axis axis estimate = 6.00'
[Mon Dec 19 06:14:04 2011] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 06:14:04 2011] Initial guess for spatial extent in simple fitting = 9.43"
[Mon Dec 19 06:14:04 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.054
[Mon Dec 19 06:14:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.43"
[Mon Dec 19 06:56:44 2011] fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Dec 19 06:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_src1.csv
[Mon Dec 19 06:56:44 2011] fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Dec 19 06:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_src1.csv
[Mon Dec 19 06:56:44 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 06:56:45 2011] fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Dec 19 06:56:45 2011] fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Dec 19 06:56:45 2011] Fit fullrun_pn_xmm0602520301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Dec 19 07:47:54 2011] Spatial fit model total counts = 7091.840000, observed total counts = 7087.000000
[Mon Dec 19 07:47:54 2011] Offset between fit and detection position for source 1 = 0.088350 pixels
[Mon Dec 19 07:47:54 2011] 7098.350000 total counts/ 2191.830000 bgd. counts: snr = 104.802137
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.088350 pixels
  Position = (379.2, 280.8) = 1 27 46.17 -73 32 57.4
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 4906.5 +/- 84.3
  Background counts = 2191.8
  Rate = 0.09 +/- 0.002
[Mon Dec 19 07:47:54 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 07:47:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 07:47:54 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 07:47:54 2011] Source does appear to be extended
[Mon Dec 19 07:47:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 07:48:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 07:48:10 2011] Initial guess for spatial extent in simple fitting = 5.89"
[Mon Dec 19 07:48:10 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.164
[Mon Dec 19 07:48:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.89"
[Mon Dec 19 08:25:50 2011] fullrun_pn_xmm0602520301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Dec 19 08:25:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602520301_pi300-10000_cl_pass1_src1.csv
[Mon Dec 19 08:25:50 2011] fullrun_pn_xmm0602520301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Dec 19 08:25:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602520301_pi300-10000_cl_pass1_src1.csv
[Mon Dec 19 08:25:50 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602520301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602520301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 08:25:50 2011] fullrun_pn_xmm0602520301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Dec 19 08:25:50 2011] fullrun_pn_xmm0602520301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Dec 19 08:25:50 2011] Fit fullrun_pn_xmm0602520301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 19 09:14:24 2011] Spatial fit model total counts = 6938.360000, observed total counts = 6931.000000
[Mon Dec 19 09:14:24 2011] Offset between fit and detection position for source 1 = 0.006783 pixels
[Mon Dec 19 09:14:24 2011] 6925.240000 total counts/ 2061.460000 bgd. counts: snr = 107.123922
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006783 pixels
  Position = (379.2, 280.8) = 1 27 46.17 -73 32 57.4
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 4863.8 +/- 83.2
  Background counts = 2061.5
  Rate = 0.09 +/- 0.002
[Mon Dec 19 09:14:24 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 09:14:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 09:14:24 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 09:14:24 2011] Source does appear to be extended
[Mon Dec 19 09:14:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 09:14:40 2011] Counts = 4863.780000, rescaling region sizes by 2.000000
[Mon Dec 19 09:14:40 2011] XMMSAS src. selection expression = ellipse(32943.506140, 24382.671600, 698.898020, 698.898020, 0.000000, X, Y)
[Mon Dec 19 09:14:40 2011] Writing source region out to fullrun_pn_xmm0602520301_pi300-10000_pass1_cl_src1_src.reg
[Mon Dec 19 09:14:40 2011] Extracting stamp from image fullrun_pn_xmm0602520301_pi300-10000_cl_sm2.00.img.gz, (339, 241) - (419, 321)
[Mon Dec 19 09:14:40 2011] XMMSAS bgd. selection expression = annulus(32943.506140, 24382.671600, 2329.660067, 4659.320134, X, Y) && !ellipse(29727.272000, 27672.957000, 417.065612, 417.065612, 0.000000, X, Y) && !ellipse(29544.417140, 24197.248800, 490.265614, 490.265614, 0.000000, X, Y) && !ellipse(33441.306763, 23645.493866, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 09:14:40 2011] Writing fullrun_pn_xmm0602520301_pi300-10000_pass1_cl_src1.gif
[Mon Dec 19 09:15:04 2011] Mean detx,y = (-344.31, 8622.84) 
[Mon Dec 19 09:15:09 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 09:16:06 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 09:16:07 2011] Setting source spectrum file to fullrun_pn_xmm0602520301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 09:16:07 2011] Setting bgd. spectrum file to fullrun_pn_xmm0602520301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Dec 19 11:40:02 2011] Updating aperture counts using extracted products
[Mon Dec 19 11:40:02 2011] Error reading totcts from fullrun_pn_xmm0602520301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 11:40:04 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 11:40:04 2011] Using photon index=1.80, rate=0.0921, arf fullrun_pn_xmm0602520301_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 11:40:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 11:40:04 2011] Updating source flux to 3.7e-13
[Mon Dec 19 11:46:27 2011] Reading fit data from xmm0602520301/analysis//spectral/fullrun_pn_xmm0602520301_pi300-10000_pass1_cl_src1_pl.csv
[Mon Dec 19 11:46:27 2011] Spectral fit parameter nH value = 1.38524e+21
[Mon Dec 19 11:46:27 2011] Spectral fit parameter PhoIndex value = 0.812768
[Mon Dec 19 11:46:27 2011] Failed to get F(0.3-8.0) from xmm0602520301/analysis//spectral/fullrun_pn_xmm0602520301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Dec 19 11:46:27 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 11:46:27 2011] Using Nh = 1.4e+21, photon index=0.81, rate=0.0921, arf fullrun_pn_xmm0602520301_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 11:46:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 11:46:27 2011] Updating source flux to 8.8e-13