[Mon Dec 19 06:08:33 2011] Detection parameters:
  Position = (386.1, 446.8) = 1 27 40.14 -73 20 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.5 +/- 18.5
  Background counts = 65.2
  Rate = 0.002 +/- 0.0002

[Mon Dec 19 06:08:34 2011] Off-axis axis estimate = 12.49'
[Mon Dec 19 07:14:49 2011] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 07:14:49 2011] Initial guess for spatial extent in simple fitting = 12.68"
[Mon Dec 19 07:14:49 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.051
[Mon Dec 19 07:14:49 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 12.68"
[Mon Dec 19 07:47:47 2011] fullrun_mos2_xmm0602520301_pi300-10000_cl_pass0_src16.ximg exists
[Mon Dec 19 07:47:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520301_pi300-10000_cl_pass0_src16.csv
[Mon Dec 19 07:47:47 2011] fullrun_mos2_xmm0602520301_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon Dec 19 07:47:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602520301_pi300-10000_cl_pass0_src16.csv
[Mon Dec 19 07:47:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602520301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602520301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 07:47:48 2011] fullrun_mos2_xmm0602520301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon Dec 19 07:47:48 2011] fullrun_mos2_xmm0602520301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Dec 19 07:47:48 2011] Fit fullrun_mos2_xmm0602520301_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Dec 19 07:48:01 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.447121 pixels away
[Mon Dec 19 07:48:01 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 07:48:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 07:48:01 2011] Assessing source extent using major
[Mon Dec 19 07:48:01 2011] Source does appear to be extended
[Mon Dec 19 07:48:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 08:43:15 2011] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 08:43:15 2011] Initial guess for spatial extent in simple fitting = 12.68"
[Mon Dec 19 08:43:15 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.051
[Mon Dec 19 08:43:15 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 12.68"
[Mon Dec 19 09:14:18 2011] fullrun_mos2_xmm0602520301_pi300-10000_cl_pass1_src16.ximg exists
[Mon Dec 19 09:14:18 2011] fullrun_mos2_xmm0602520301_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon Dec 19 09:14:18 2011] Fit fullrun_mos2_xmm0602520301_pi300-10000_cl_pass1_src16 appears to have run properly
[Mon Dec 19 09:14:19 2011] fullrun_mos2_xmm0602520301_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon Dec 19 09:14:19 2011] fullrun_mos2_xmm0602520301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Dec 19 09:14:19 2011] Fit fullrun_mos2_xmm0602520301_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Mon Dec 19 09:14:31 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.447121 pixels away
[Mon Dec 19 09:14:31 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 09:14:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 09:14:31 2011] Assessing source extent using major
[Mon Dec 19 09:14:31 2011] Source does appear to be extended
[Mon Dec 19 09:14:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 10:53:11 2011] XMMSAS src. selection expression = ellipse(33544.459961, 38821.702393, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 10:53:11 2011] Writing source region out to fullrun_mos2_xmm0602520301_pi300-10000_pass1_cl_src10_src.reg
[Mon Dec 19 10:53:11 2011] Extracting stamp from image fullrun_mos2_xmm0602520301_pi300-10000_cl_sm2.00.img.gz, (349, 409) - (424, 484)
[Mon Dec 19 10:53:11 2011] XMMSAS bgd. selection expression = annulus(33544.459961, 38821.702393, 1087.500000, 2175.000000, X, Y) && !ellipse(34890.079254, 38197.130646, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 10:53:11 2011] Writing fullrun_mos2_xmm0602520301_pi300-10000_pass1_cl_src10.gif
[Mon Dec 19 11:02:44 2011] Mean detx,y = (-13471.86, -4762.50) 
[Mon Dec 19 11:02:46 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 11:03:01 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 11:03:01 2011] Setting source spectrum file to fullrun_mos2_xmm0602520301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Dec 19 11:03:01 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0602520301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Dec 19 11:32:13 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 19 11:32:13 2011] rmf not generated due to insufficient counts
[Mon Dec 19 11:40:08 2011] Updating aperture counts using extracted products
[Mon Dec 19 11:40:08 2011] Error reading totcts from fullrun_mos2_xmm0602520301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Dec 19 11:40:09 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 11:40:09 2011] Using photon index=1.80, rate=0.00166, arf fullrun_mos2_xmm0602520301_pi300-10000_pass1_cl_src10.arf
[Mon Dec 19 11:40:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 11:40:09 2011] Updating source flux to 3.6e-14
[Mon Dec 19 11:40:50 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting