[Mon Dec 19 06:08:10 2011] Detection parameters:
  Position = (198.5, 413.3) = 1 30 50.22 -73 23 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.6 +/- 22.9
  Background counts = 88.0
  Rate = 0.006 +/- 0.0005

[Mon Dec 19 06:08:11 2011] Off-axis axis estimate = 11.04'
[Mon Dec 19 06:56:45 2011] Using EEF radius (= 11.95 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 06:56:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 06:56:45 2011] Initial guess for spatial extent in simple fitting = 11.95"
[Mon Dec 19 06:56:45 2011] source mask rpix=2.7, npix_max = 42, mask sum = 49, frac = 1.162
[Mon Dec 19 06:56:45 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 11.95"
[Mon Dec 19 07:14:48 2011] fullrun_mos1_xmm0602520301_pi300-10000_cl_pass0_src2.ximg exists
[Mon Dec 19 07:14:48 2011] fullrun_mos1_xmm0602520301_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Dec 19 07:14:48 2011] Fit fullrun_mos1_xmm0602520301_pi300-10000_cl_pass0_src2 appears to have run properly
[Mon Dec 19 07:14:48 2011] fullrun_mos1_xmm0602520301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Dec 19 07:14:48 2011] fullrun_mos1_xmm0602520301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Dec 19 07:14:48 2011] Fit fullrun_mos1_xmm0602520301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Dec 19 07:47:56 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.664071 pixels away
[Mon Dec 19 07:47:56 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 07:47:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 07:47:56 2011] Assessing source extent using major
[Mon Dec 19 07:47:56 2011] Source does appear to be extended
[Mon Dec 19 07:47:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 08:25:50 2011] Using EEF radius (= 11.95 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 08:25:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 08:25:50 2011] Initial guess for spatial extent in simple fitting = 11.95"
[Mon Dec 19 08:25:50 2011] source mask rpix=2.7, npix_max = 42, mask sum = 49, frac = 1.162
[Mon Dec 19 08:25:50 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 11.95"
[Mon Dec 19 08:43:15 2011] fullrun_mos1_xmm0602520301_pi300-10000_cl_pass1_src2.ximg exists
[Mon Dec 19 08:43:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520301_pi300-10000_cl_pass1_src2.csv
[Mon Dec 19 08:43:15 2011] fullrun_mos1_xmm0602520301_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Dec 19 08:43:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602520301_pi300-10000_cl_pass1_src2.csv
[Mon Dec 19 08:43:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602520301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602520301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 08:43:15 2011] fullrun_mos1_xmm0602520301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Dec 19 08:43:15 2011] fullrun_mos1_xmm0602520301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Dec 19 08:43:15 2011] Fit fullrun_mos1_xmm0602520301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Dec 19 09:14:27 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.664071 pixels away
[Mon Dec 19 09:14:27 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 09:14:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 09:14:27 2011] Assessing source extent using major
[Mon Dec 19 09:14:27 2011] Source does appear to be extended
[Mon Dec 19 09:14:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 10:29:07 2011] XMMSAS src. selection expression = ellipse(17224.934753, 35909.318451, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 10:29:07 2011] Writing source region out to fullrun_mos1_xmm0602520301_pi300-10000_pass1_cl_src3_src.reg
[Mon Dec 19 10:29:07 2011] Extracting stamp from image fullrun_mos1_xmm0602520301_pi300-10000_cl_sm2.00.img.gz, (161, 376) - (236, 451)
[Mon Dec 19 10:29:07 2011] XMMSAS bgd. selection expression = annulus(17224.934753, 35909.318451, 1087.500000, 2175.000000, X, Y)
[Mon Dec 19 10:29:07 2011] Writing fullrun_mos1_xmm0602520301_pi300-10000_pass1_cl_src3.gif
[Mon Dec 19 10:29:43 2011] Mean detx,y = (9969.61, 5414.14) 
[Mon Dec 19 10:29:46 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 10:30:07 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 10:30:07 2011] Setting source spectrum file to fullrun_mos1_xmm0602520301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Dec 19 10:30:07 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0602520301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Dec 19 10:41:22 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 19 10:41:22 2011] rmf not generated due to insufficient counts
[Mon Dec 19 11:40:06 2011] Updating aperture counts using extracted products
[Mon Dec 19 11:40:06 2011] Error reading totcts from fullrun_mos1_xmm0602520301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Dec 19 11:40:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 11:40:07 2011] Using photon index=1.80, rate=0.00551, arf fullrun_mos1_xmm0602520301_pi300-10000_pass1_cl_src3.arf
[Mon Dec 19 11:40:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 11:40:07 2011] Updating source flux to 9.8e-14
[Mon Dec 19 11:40:11 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting