[Mon Aug 13 18:56:45 2012] Detection parameters:
  Position = (277.7, 288.2) = 1 57 48.97 -21 54 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43193.1 +/- 247.0
  Background counts = 81.5
  Rate = 1 +/- 0.006

[Mon Aug 13 18:56:47 2012] Off-axis axis estimate = 1.67'
[Mon Aug 13 19:01:10 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 19:01:10 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Mon Aug 13 19:01:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Mon Aug 13 19:01:10 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.27"
[Mon Aug 13 20:05:22 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_src4.ximg exists
[Mon Aug 13 20:05:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_src4.csv
[Mon Aug 13 20:05:22 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Aug 13 20:05:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_src4.csv
[Mon Aug 13 20:05:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 20:05:23 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Aug 13 20:05:23 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Aug 13 20:05:23 2012] Fit fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Aug 13 21:32:49 2012] Spatial fit model total counts = 38217.800000, observed total counts = 38123.000000
[Mon Aug 13 21:32:49 2012] Offset between fit and detection position for source 4 = 0.191067 pixels
[Mon Aug 13 21:32:49 2012] 38318.710000 total counts/ 7797.510000 bgd. counts: snr = 345.639712
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.191067 pixels
  Position = (277.7, 288.4) = 1 57 48.97 -21 54 6.7
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 30521.2 +/- 195.8
  Background counts = 7797.5
  Rate = 0.6 +/- 0.004
[Mon Aug 13 21:32:49 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 21:32:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 21:32:49 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 21:32:49 2012] Source does appear to be extended
[Mon Aug 13 21:32:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 21:33:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 13 21:33:20 2012] Initial guess for spatial extent in simple fitting = 5.81"
[Mon Aug 13 21:33:20 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.891
[Mon Aug 13 21:33:20 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.81"
[Mon Aug 13 22:21:41 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_src4.ximg exists
[Mon Aug 13 22:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_src4.csv
[Mon Aug 13 22:21:41 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Aug 13 22:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_src4.csv
[Mon Aug 13 22:21:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 22:21:42 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Aug 13 22:21:42 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Aug 13 22:21:42 2012] Fit fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Aug 13 23:43:30 2012] Spatial fit model total counts = 38216.900000, observed total counts = 38123.000000
[Mon Aug 13 23:43:30 2012] Offset between fit and detection position for source 4 = 0.000127 pixels
[Mon Aug 13 23:43:30 2012] 38317.770000 total counts/ 7793.970000 bgd. counts: snr = 345.747648
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.000127 pixels
  Position = (277.7, 288.4) = 1 57 48.97 -21 54 6.7
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 30523.8 +/- 195.7
  Background counts = 7794.0
  Rate = 0.6 +/- 0.004
[Mon Aug 13 23:43:30 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 23:43:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 23:43:30 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 23:43:30 2012] Source does appear to be extended
[Mon Aug 13 23:43:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 23:43:48 2012] Counts = 30523.800000, rescaling region sizes by 3.000000
[Mon Aug 13 23:43:48 2012] XMMSAS src. selection expression = ellipse(24114.185400, 25043.775800, 1045.794630, 1045.794630, 0.000000, X, Y)
[Mon Aug 13 23:43:48 2012] Writing source region out to fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src4_src.reg
[Mon Aug 13 23:43:48 2012] Extracting stamp from image fullrun_pn_xmm0602490101_pi300-10000_cl_sm2.00.img.gz, (218, 228) - (338, 349)
[Mon Aug 13 23:43:48 2012] XMMSAS bgd. selection expression = annulus(24114.185400, 25043.775800, 5228.973150, 10457.946301, X, Y) && !ellipse(31751.494800, 19301.778000, 1422.873641, 1422.873641, 0.000000, X, Y) && !ellipse(19848.065201, 19457.859528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30518.380400, 25182.610000, 420.914412, 420.914412, 0.000000, X, Y) && !ellipse(24602.687683, 30727.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17560.876938, 29179.166992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13365.617355, 27255.555786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28709.388763, 24703.005310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18540.273438, 24129.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30817.707703, 17802.004044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15264.146500, 32043.587830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26597.923615, 13765.605484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21991.113251, 33769.189606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13614.469269, 33153.745850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31283.179474, 28931.240356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15319.444122, 28692.606323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20872.185669, 28076.251892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21888.187057, 26195.431793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27563.600250, 26015.189819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24506.403046, 14823.953262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20232.070053, 25409.944031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25398.376068, 23992.392029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22885.895294, 22200.168930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30150.302800, 21998.833000, 1096.992032, 505.980015, 198.394038, X, Y) && !ellipse(26372.006800, 19243.212600, 422.280706, 422.280706, 0.000000, X, Y) && !ellipse(30074.174713, 15352.002747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16889.550125, 34600.739471, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 13 23:43:48 2012] Writing fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src4.gif
[Mon Aug 13 23:52:54 2012] Mean detx,y = (164.73, -103.50) 
[Mon Aug 13 23:53:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 23:57:05 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 23:57:05 2012] Setting source spectrum file to fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Aug 13 23:57:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Aug 14 01:39:33 2012] Updating aperture counts using extracted products
[Tue Aug 14 01:39:33 2012] Error reading totcts from fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Aug 14 01:39:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 01:39:34 2012] Using photon index=1.80, rate=0.629, arf fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src4.arf
[Tue Aug 14 01:39:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 01:39:34 2012] Updating source flux to 1.5e-12