[Mon Aug 13 18:56:45 2012] Detection parameters: Position = (365.6, 222.2) = 1 57 21.48 -21 58 54.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 25928.8 +/- 191.5 Background counts = 74.8 Rate = 0.5 +/- 0.004 [Mon Aug 13 18:56:47 2012] Off-axis axis estimate = 7.37' [Mon Aug 13 19:01:10 2012] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting [Mon Aug 13 19:01:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Aug 13 19:01:10 2012] Initial guess for spatial extent in simple fitting = 10.11" [Mon Aug 13 19:01:10 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.940 [Mon Aug 13 19:01:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.11" [Mon Aug 13 20:05:22 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_src1.ximg exists [Mon Aug 13 20:05:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_src1.csv [Mon Aug 13 20:05:22 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_src1_1.ximg exists [Mon Aug 13 20:05:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_src1.csv [Mon Aug 13 20:05:22 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 13 20:05:22 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Mon Aug 13 20:05:22 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Mon Aug 13 20:05:22 2012] Fit fullrun_pn_xmm0602490101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Mon Aug 13 21:32:49 2012] Spatial fit model total counts = 25669.400000, observed total counts = 25135.000000 [Mon Aug 13 21:32:49 2012] Offset between fit and detection position for source 1 = 0.217435 pixels [Mon Aug 13 21:32:49 2012] 25743.410000 total counts/ 6310.510000 bgd. counts: snr = 244.627561 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.217435 pixels Position = (365.5, 222.4) = 1 57 21.52 -21 58 53.7 Extent = 6.2 (6.1-6.3)", rotation angle = 0 Source counts = 19432.9 +/- 160.4 Background counts = 6310.5 Rate = 0.4 +/- 0.003 [Mon Aug 13 21:32:49 2012] Vigneting correction estimate = 1.000000 [Mon Aug 13 21:32:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 13 21:32:49 2012] Assessing source extent using major axis lower bound [Mon Aug 13 21:32:49 2012] Source does appear to be extended [Mon Aug 13 21:32:49 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 13 21:33:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Mon Aug 13 21:33:20 2012] Initial guess for spatial extent in simple fitting = 6.20" [Mon Aug 13 21:33:20 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.810 [Mon Aug 13 21:33:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.20" [Mon Aug 13 22:21:41 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_src1.ximg exists [Mon Aug 13 22:21:41 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_src1_1.ximg exists [Mon Aug 13 22:21:41 2012] Fit fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_src1 appears to have run properly [Mon Aug 13 22:21:42 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Mon Aug 13 22:21:42 2012] fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Mon Aug 13 22:21:42 2012] Fit fullrun_pn_xmm0602490101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Mon Aug 13 23:43:30 2012] Spatial fit model total counts = 24717.600000, observed total counts = 24387.000000 [Mon Aug 13 23:43:30 2012] Offset between fit and detection position for source 1 = 0.004079 pixels [Mon Aug 13 23:43:30 2012] 24803.450000 total counts/ 6013.250000 bgd. counts: snr = 242.313032 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.004079 pixels Position = (365.5, 222.4) = 1 57 21.52 -21 58 53.7 Extent = 5.9 (5.9-6.0)", rotation angle = 0 Source counts = 18790.2 +/- 157.5 Background counts = 6013.2 Rate = 0.4 +/- 0.003 [Mon Aug 13 23:43:30 2012] Vigneting correction estimate = 1.000000 [Mon Aug 13 23:43:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 13 23:43:30 2012] Assessing source extent using major axis lower bound [Mon Aug 13 23:43:30 2012] Source does appear to be extended [Mon Aug 13 23:43:30 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 13 23:43:48 2012] Counts = 18790.200000, rescaling region sizes by 3.000000 [Mon Aug 13 23:43:48 2012] XMMSAS src. selection expression = ellipse(31751.494800, 19301.778000, 1067.155231, 1067.155231, 0.000000, X, Y) [Mon Aug 13 23:43:48 2012] Writing source region out to fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src1_src.reg [Mon Aug 13 23:43:48 2012] Extracting stamp from image fullrun_pn_xmm0602490101_pi300-10000_cl_sm2.00.img.gz, (304, 161) - (427, 284) [Mon Aug 13 23:43:48 2012] XMMSAS bgd. selection expression = annulus(31751.494800, 19301.778000, 5335.776154, 10671.552307, X, Y) && !ellipse(39379.749725, 17607.532440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24114.185400, 25043.775800, 1394.392840, 1394.392840, 0.000000, X, Y) && !ellipse(30518.380400, 25182.610000, 420.914412, 420.914412, 0.000000, X, Y) && !ellipse(24602.687683, 30727.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28709.388763, 24703.005310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37669.377197, 23535.365906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36208.922577, 21173.629730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30817.707703, 17802.004044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26597.923615, 13765.605484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31283.179474, 28931.240356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20872.185669, 28076.251892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21888.187057, 26195.431793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27563.600250, 26015.189819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24506.403046, 14823.953262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20232.070053, 25409.944031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25398.376068, 23992.392029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22885.895294, 22200.168930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30150.302800, 21998.833000, 1096.992032, 505.980015, 198.394038, X, Y) && !ellipse(26372.006800, 19243.212600, 422.280706, 422.280706, 0.000000, X, Y) && !ellipse(30074.174713, 15352.002747, 870.000000, 870.000000, 0.000000, X, Y) [Mon Aug 13 23:43:48 2012] Writing fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src1.gif [Mon Aug 13 23:44:33 2012] Mean detx,y = (-9219.66, -1866.54) [Mon Aug 13 23:44:44 2012] Setting backscal keywords in source and bgd. spectrum [Mon Aug 13 23:48:14 2012] Binned source spectrum to 10 counts/bin [Mon Aug 13 23:48:14 2012] Setting source spectrum file to fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Mon Aug 13 23:48:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Tue Aug 14 01:39:33 2012] Updating aperture counts using extracted products [Tue Aug 14 01:39:33 2012] Error reading totcts from fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Tue Aug 14 01:39:34 2012] Calculating source flux in energy range 0.30-8.00 [Tue Aug 14 01:39:34 2012] Using photon index=1.80, rate=0.387, arf fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src1.arf [Tue Aug 14 01:39:34 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Aug 14 01:39:34 2012] Updating source flux to 1.8e-12 [Tue Aug 14 01:44:07 2012] Reading fit data from xmm0602490101/analysis//spectral/fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src1_pl.csv [Tue Aug 14 01:44:07 2012] Spectral fit parameter nH value = 2.87191e+20 [Tue Aug 14 01:44:07 2012] Spectral fit parameter PhoIndex value = 2.55939 [Tue Aug 14 01:44:07 2012] Failed to get F(0.3-8.0) from xmm0602490101/analysis//spectral/fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Tue Aug 14 01:44:07 2012] Calculating source flux in energy range 0.30-8.00 [Tue Aug 14 01:44:07 2012] Using Nh = 2.9e+20, photon index=2.56, rate=0.387, arf fullrun_pn_xmm0602490101_pi300-10000_pass1_cl_src1.arf [Tue Aug 14 01:44:07 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Aug 14 01:44:07 2012] Updating source flux to 1.3e-12