[Mon Aug 13 18:57:12 2012] Detection parameters:
  Position = (365.5, 222.2) = 1 57 21.52 -21 58 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7672.0 +/- 107.0
  Background counts = 22.3
  Rate = 0.3 +/- 0.004

[Mon Aug 13 18:57:13 2012] Off-axis axis estimate = 7.36'
[Mon Aug 13 20:05:23 2012] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 20:05:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 13 20:05:23 2012] Initial guess for spatial extent in simple fitting = 10.11"
[Mon Aug 13 20:05:23 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.940
[Mon Aug 13 20:05:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.11"
[Mon Aug 13 20:43:13 2012] fullrun_mos1_xmm0602490101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 13 20:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602490101_pi300-10000_cl_pass0_src1.csv
[Mon Aug 13 20:43:13 2012] fullrun_mos1_xmm0602490101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 13 20:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602490101_pi300-10000_cl_pass0_src1.csv
[Mon Aug 13 20:43:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602490101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602490101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 20:43:13 2012] fullrun_mos1_xmm0602490101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 13 20:43:13 2012] fullrun_mos1_xmm0602490101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 13 20:43:14 2012] Fit fullrun_mos1_xmm0602490101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 13 21:32:54 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.333790 pixels away
[Mon Aug 13 21:32:54 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 21:32:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 21:32:54 2012] Assessing source extent using major
[Mon Aug 13 21:32:54 2012] Source does appear to be extended
[Mon Aug 13 21:32:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 22:21:42 2012] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 22:21:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 13 22:21:42 2012] Initial guess for spatial extent in simple fitting = 10.11"
[Mon Aug 13 22:21:42 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.940
[Mon Aug 13 22:21:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.11"
[Mon Aug 13 23:03:15 2012] fullrun_mos1_xmm0602490101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 13 23:03:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602490101_pi300-10000_cl_pass1_src1.csv
[Mon Aug 13 23:03:15 2012] fullrun_mos1_xmm0602490101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 13 23:03:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602490101_pi300-10000_cl_pass1_src1.csv
[Mon Aug 13 23:03:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602490101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602490101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 23:03:16 2012] fullrun_mos1_xmm0602490101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 13 23:03:16 2012] fullrun_mos1_xmm0602490101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 13 23:03:16 2012] Fit fullrun_mos1_xmm0602490101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 13 23:43:34 2012] Spatial fit model total counts = 7399.990000, observed total counts = 7400.000000
[Mon Aug 13 23:43:34 2012] Offset between fit and detection position for source 1 = 0.259600 pixels
[Mon Aug 13 23:43:34 2012] 7400.400000 total counts/ 1479.790000 bgd. counts: snr = 153.909848
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.259600 pixels
  Position = (365.4, 222.5) = 1 57 21.55 -21 58 53.6
  Extent = 6.6 (6.5-6.8)", rotation angle = 0
  Source counts = 5920.6 +/- 86.0
  Background counts = 1479.8
  Rate = 0.1 +/- 0.002
[Mon Aug 13 23:43:34 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 23:43:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 23:43:34 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 23:43:34 2012] Source does appear to be extended
[Mon Aug 13 23:43:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 00:54:59 2012] Counts = 5920.610000, rescaling region sizes by 2.000000
[Tue Aug 14 00:54:59 2012] XMMSAS src. selection expression = ellipse(31744.174120, 19304.703180, 793.645223, 793.645223, 0.000000, X, Y)
[Tue Aug 14 00:54:59 2012] Writing source region out to fullrun_mos1_xmm0602490101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 14 00:54:59 2012] Extracting stamp from image fullrun_mos1_xmm0602490101_pi300-10000_cl_sm2.00.img.gz, (320, 177) - (411, 268)
[Tue Aug 14 00:54:59 2012] XMMSAS bgd. selection expression = annulus(31744.174120, 19304.703180, 2645.484076, 5290.968152, X, Y) && !ellipse(30812.945800, 17767.684480, 340.068010, 340.068010, 0.000000, X, Y) && !ellipse(36222.202182, 21185.834669, 325.790590, 322.248202, 53.735595, X, Y) && !ellipse(26637.573822, 13747.076035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36887.903839, 14866.554535, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 00:54:59 2012] Writing fullrun_mos1_xmm0602490101_pi300-10000_pass1_cl_src1.gif
[Tue Aug 14 00:55:02 2012] Mean detx,y = (1892.90, -9534.88) 
[Tue Aug 14 00:55:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 00:55:40 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 00:55:40 2012] Setting source spectrum file to fullrun_mos1_xmm0602490101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 00:55:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602490101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 14 01:39:34 2012] Updating aperture counts using extracted products
[Tue Aug 14 01:39:34 2012] Error reading totcts from fullrun_mos1_xmm0602490101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 01:39:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 01:39:34 2012] Using photon index=1.80, rate=0.117, arf fullrun_mos1_xmm0602490101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 01:39:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 01:39:34 2012] Updating source flux to 2.1e-12
[Tue Aug 14 01:40:53 2012] Reading fit data from xmm0602490101/analysis//spectral/fullrun_mos1_xmm0602490101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 14 01:40:53 2012] Spectral fit parameter nH value = 4.55099e+20
[Tue Aug 14 01:40:53 2012] Spectral fit parameter PhoIndex value = 2.58412
[Tue Aug 14 01:40:53 2012] Failed to get F(0.3-8.0) from xmm0602490101/analysis//spectral/fullrun_mos1_xmm0602490101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 14 01:40:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 01:40:53 2012] Using Nh = 4.6e+20, photon index=2.58, rate=0.117, arf fullrun_mos1_xmm0602490101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 01:40:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 01:40:53 2012] Updating source flux to 1.6e-12